BS EN 825-2013 Thermal insulating products for building applications Determination of flatness《建筑物用隔热产品 平整度的测定》.pdf

《BS EN 825-2013 Thermal insulating products for building applications Determination of flatness《建筑物用隔热产品 平整度的测定》.pdf》由会员分享，可在线阅读，更多相关《BS EN 825-2013 Thermal insulating products for building applications Determination of flatness《建筑物用隔热产品 平整度的测定》.pdf（12页珍藏版）》请在麦多课文档分享上搜索。

1、raising standards worldwideNO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBSI Standards PublicationBS EN 825:2013Thermal insulating productsfor building applications Determination of flatnessBS EN 825:2013 BRITISH STANDARDNational forewordThis British Standard is the UK implem

2、entation of EN 825:2013. Itsupersedes BS EN 825:1995 which is withdrawn.The UK participation in its preparation was entrusted to TechnicalCommittee B/540, Energy performance of materials components andbuildings.A list of organizations represented on this committee can beobtained on request to its se

3、cretary.This publication does not purport to include all the necessaryprovisions of a contract. Users are responsible for its correctapplication. The British Standards Institution 2013. Published by BSI StandardsLimited 2013ISBN 978 0 580 78038 7ICS 91.100.60Compliance with a British Standard cannot

4、 confer immunity fromlegal obligations.This British Standard was published under the authority of theStandards Policy and Strategy Committee on 31 March 2013.Amendments issued since publicationDate Text affectedBS EN 825:2013EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 825 March 2013 ICS 91.

5、100.60 Supersedes EN 825:1994English Version Thermal insulating products for building applications - Determination of flatness Produits isolants thermiques destins aux applications du btiment - Dtermination de la planit Wrmedmmstoffe fr das Bauwesen - Bestimmung der Ebenheit This European Standard w

6、as approved by CEN on 15 December 2012. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such

7、 national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own

8、language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Gr

9、eece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUN

10、G Management Centre: Avenue Marnix 17, B-1000 Brussels 2013 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 825:2013: EBS EN 825:2013EN 825:2013 (E) 2 Contents Page Foreword . 3 1 Scope 5 2 Normative references . 5 3 Terms and defi

11、nitions 5 4 Principle 5 5 Apparatus . 5 6 Test specimens 5 7 Procedure . 6 8 Calculation and expression of results 7 9 Accuracy of measurement . 7 10 Test report 7 BS EN 825:2013EN 825:2013 (E) 3 Foreword This document (EN 825:2013) has been prepared by Technical Committee CEN/TC 88 “Thermal insulat

12、ing materials and products”, the secretariat of which is held by DIN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by September 2013, and conflicting national standards shall be withdrawn at the l

13、atest by September 2013. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. This document supersedes EN 825:1994. The revision of this st

14、andard contains no major changes, only minor corrections and clarifications of an editorial nature. This European standard has been drafted for applications in building but it may also be used in other areas where it is relevant. This European test standard is one of the following group of interrela

15、ted standards on test methods for determining dimensions and properties of thermal insulation materials and products, all of which fall within the scope of CEN/TC 88: EN 822, Thermal insulating products for building applications Determination of length and width EN 823, Thermal insulating products f

16、or building applications Determination of thickness EN 824, Thermal insulating products for building applications Determination of squareness EN 825, Thermal insulating products for building applications Determination of flatness EN 826, Thermal insulating products for building applications Determin

17、ation of compression behaviour EN 1602, Thermal insulating products for building applications Determination of the apparent density EN 1603, Thermal insulating products for building applications Determination of dimensional stability under constant normal laboratory conditions (23 C/50 % relative hu

18、midity) EN 1604, Thermal insulating products for building applications Determination of dimensional stability under specified temperature and humidity conditions EN 1605, Thermal insulating products for building applications Determination of deformation under specified compressive load and temperatu

19、re conditions EN 1606, Thermal insulating products for building applications Determination of compressive creep EN 1607, Thermal insulating products for building applications Determination of tensile strength perpendicular to faces EN 1608, Thermal insulating products for building applications Deter

20、mination of tensile strength parallel to faces BS EN 825:2013EN 825:2013 (E) 4 EN 1609, Thermal insulating products for building applications Determination of short-term water absorption by partial immersion EN 12085, Thermal insulating products for building applications Determination of linear dime

21、nsions of test specimens EN 12086, Thermal insulating products for building applications Determination of water vapour transmission properties EN 12087, Thermal insulating products for building applications Determination of long-term water absorption by immersion EN 12088, Thermal insulating product

22、s for building applications Determination of long-term water absorption by diffusion EN 12089, Thermal insulating products for building applications Determination of bending behaviour EN 12090, Thermal insulating products for building applications Determination of shear behaviour EN 12091, Thermal i

23、nsulating products for building applications Determination of freeze-thaw resistance EN 12429, Thermal insulating products for building applications Conditioning to moisture equilibrium under specified temperature and humidity conditions EN 12430, Thermal insulating products for building application

24、s Determination of behaviour under point load EN 12431, Thermal insulating products for building applications Determination of thickness for floating floor insulating products EN 13793, Thermal insulating products for building applications Determination of behaviour under cyclic loading EN 13820, Th

25、ermal insulating materials for building applications Determination of organic content According to the CEN/CENELEC Internal Regulations, the national standards organisations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech R

26、epublic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. B

27、S EN 825:2013EN 825:2013 (E) 5 1 Scope This European Standard specifies the equipment and procedures for determining the deviation from flatness for full-size products. It is applicable to thermal insulating products. 2 Normative references This European Standard contains no normative references. 3

28、Terms and definitions For the purposes of this document, the following term and definition applies. 3.1 deviation from flatness maximum distance between the product placed on a flat surface with the convex side uppermost and the flat surface 4 Principle The maximum distance between the product place

29、d on a flat surface and the flat surface is measured. 5 Apparatus 5.1 Flat surface. 5.2 Metal rule or metal tape, graduated in millimetres and permitting reading to 0,5 mm. 5.3 Rigid frame with a movable measuring device consisting of a disc with a diameter of 30 mm, fixed to a graduated pin or a di

30、al gauge (graduated to at least 0,5 mm) applying a load of (2,0 0,1) N. Any test equipment which provides the same result with at least the same accuracy may be used. 6 Test specimens 6.1 Dimensions of test specimens The test specimen shall be the full-size product. 6.2 Number of test specimens The

31、number of test specimens shall be as specified in the relevant product standard. In the absence of a product standard, the number of test specimens may be agreed between parties. 6.3 Conditioning of test specimens The test specimens shall be stored for at least 6 h at (23 5) C. In cases of dispute,

32、they shall be stored at (23 2) C and (50 5) % relative humidity for the time specified in the relevant product standard. BS EN 825:2013EN 825:2013 (E) 6 7 Procedure 7.1 Test conditions The test shall be carried out at (23 5) C. In cases of dispute, it shall be carried out at (23 2) C and (50 5) % re

33、lative humidity. 7.2 Test procedure 7.2.1 Lay the test specimen with the convex face, if any, uppermost on a flat surface. If there is a visible deviation from flatness only along the length or only along the width, make the measurement in accordance with 7.2.2 (see Figures 1a and 1b). If there is a

34、 deviation from flatness along both the length and width (warped products), make the measurement in accordance with 7.2.3 (see Figure 2). 7.2.2 Using the metal tape or rule, measure the maximum distance between the bottom edge of the specimen and the flat surface, Smax, to the nearest 0,5 mm. 7.2.3

35、Locate the maximum and minimum distances from the flat surface using the measuring device (see 5.3) as shown in Figure 2. At these positions read the distances Ymaxand Ymin,to the nearest 0,5 mm. If the test specimen only rests on three points, the possibility of alternative flatness measurements ex

36、ists and all shall be measured. a) Measurement of deviation from flatness in length b) Measurement of deviation from flatness in width Figure 1 Measurement of deviation from flatness BS EN 825:2013EN 825:2013 (E) 7 Figure 2 Location of maximum and minimum distances 8 Calculation and expression of re

37、sults For test specimens with deviation from flatness in one direction only, report the deviation as the maximum value measured in millimetres. For warped products, calculate the deviation from flatness, Smax, in millimetres, using the following formula: Smax= Ymax Ymin (1) 9 Accuracy of measurement

38、 NOTE It has not been possible to include a statement of the accuracy of the method in this edition of the standard, but it is intended to include such a statement when the standard is next revised. 10 Test report The test report shall include the following information: a) reference to this European

39、 Standard; b) product identification: 1) product name, factory, manufacturer or supplier; 2) production code number; 3) type of product; 4) packaging; 5) the form in which the product arrived at the laboratory; 6) other information as appropriate, e.g. nominal thickness, nominal density; c) test pro

40、cedure: 1) pre-test history and sampling (e.g. who sampled and place of sampling ); BS EN 825:2013EN 825:2013 (E) 8 2) conditioning; 3) deviation from Clauses 6 and 7, if any; 4) date of test; 5) general information relating to the test; 6) any occurrences which may have affected the results. Inform

41、ation about the apparatus and identity of the technician should be available in the laboratory but it need not be recorded in the report; d) results: all individual values and the maximum value of the deviation from flatness and the position where it occurred. This page deliberately left blankBSI is

42、 the independent national body responsible for preparing British Standards and other standards-related publications, information and services. It presents the UK view on standards in Europe and at the international level. BSI is incorporated by Royal Charter. British Standards and other standardisat

43、ion products are published by BSI Standards Limited.British Standards Institution (BSI)raising standards worldwideBSI389 Chiswick High Road London W4 4AL UKTel +44 (0)20 8996 9001Fax +44 (0)20 8996 Standards and PASs are periodically updated by amendment or revision. Users of British Standards and

44、PASs should make sure that they possess the latest amendments or editions.It is the constant aim of BSI to improve the quality of our products and services. We would be grateful if anyone finding an inaccuracy or ambiguity while using British Standards would inform the Secretary of the technical com

45、mittee responsible, the identity of which can be found on the inside frontcover. Similary for PASs, please notify BSI Customer Services.Tel: +44 (0)20 8996 9001 Fax: +44 (0)20 8996 7001BSI offers BSI Subscribing Members an individual updating service called PLUS which ensures that subscribers automa

46、tically receive the latest editions of British Standards and PASs.Tel: +44 (0)20 8996 7669 Fax: +44 (0)20 8996 7001Email: Buying standardsYou may buy PDF and hard copy versions of standards directly using acredit card from the BSI Shop on the website addition all orders for BSI, international and f

47、oreign standards publicationscan be addressed to BSI Customer Services.Tel: +44 (0)20 8996 9001 Fax: +44 (0)20 8996 7001Email: In response to orders for international standards, BSI will supply the British Standard implementation of the relevant international standard, unless otherwise requested.Inf

48、ormation on standardsBSI provides a wide range of information on national, Europeanand international standards through its Knowledge Centre.Tel: +44 (0)20 8996 7004 Fax: +44 (0)20 8996 7005Email: BSI Subscribing Members are kept up to date with standards developments and receive substantial discounts on the purchase priceof standards. For details of these and other benefits contact Membership Administration. Tel: +44 (0)20 8996 7002 Fax: +44 (0)20 8996 7001 Email: Information regarding online access to British Standards and PASs via British Standards Online can be found at