BS EN 606-2004 Bar coding - Transport and handling labels for steel products《条形码 钢制品的运输和搬运标签》.pdf

《BS EN 606-2004 Bar coding - Transport and handling labels for steel products《条形码 钢制品的运输和搬运标签》.pdf》由会员分享，可在线阅读，更多相关《BS EN 606-2004 Bar coding - Transport and handling labels for steel products《条形码 钢制品的运输和搬运标签》.pdf（44页珍藏版）》请在麦多课文档分享上搜索。

1、BRITISH STANDARD BS EN 606:2004 Bar coding Transport and handling labels for steel products The European Standard EN 606:2004 has the status of a British Standard ICS 35.040; 35.240.60 BS EN 606:2004 This British Standard was published under the authority of the Standards Policy and Strategy Committ

2、ee on 16 December 2004 BSI 16 December 2004 ISBN 0 580 45024 4 National foreword This British Standard is the official English language version of EN 606:2004. It supersedes DD ENV 606:1993 which is withdrawn. The UK participation in its preparation was entrusted to Technical Committee IST/34, Autom

3、atic identification and data capture techniques, which has the responsibility to: A list of organizations represented on this committee can be obtained on request to its secretary. Cross-references The British Standards which implement international or European publications referred to in this docum

4、ent may be found in the BSI Catalogue under the section entitled “International Standards Correspondence Index”, or by using the “Search” facility of the BSI Electronic Catalogue or of British Standards Online. This publication does not purport to include all the necessary provisions of a contract.

5、Users are responsible for its correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. aid enquirers to understand the text; present to the responsible European committee any enquiries on the interpretation, or proposals for change, and keep

6、the UK interests informed; monitor related international and European developments and promulgate them in the UK. Summary of pages This document comprises a front cover, an inside front cover, the EN title page, pages 2 to 40, an inside back cover and a back cover. The BSI copyright notice displayed

7、 in this document indicates when the document was last issued. Amendments issued since publication Amd. No. Date CommentsEUROPEANSTANDARD NORMEEUROPENNE EUROPISCHENORM EN606 August2004 ICS35.040;35.240.60 Englishversion BarcodingTransportandhandlinglabelsforsteelproducts CodesbarresEtiqettespourtran

8、sportetmanutentionde produitssidrurgiques StrichcodierungEtikettenfrTransportundHandhabung vonStahlprodukten ThisEuropeanStandardwasapprovedbyCENon21June2004. CENmembersareboundtocomplywiththeCEN/CENELECInternalRegulationswhichstipulatetheconditionsforgivingthisEurope an Standardthestatusofanational

9、standardwithoutanyalteration.Uptodatelistsandbibliographicalreferencesconcernings uchnational standardsmaybeobtainedonapplicationtotheCentralSecretariatortoanyCENmember. ThisEuropeanStandardexistsinthreeofficialversions(English,French,German).Aversioninanyotherlanguagemadebytra nslation undertheresp

10、onsibilityofaCENmemberintoitsownlanguageandnotifiedtotheCentralSecretariathasthesamestatusast heofficial versions. CENmembersarethenationalstandardsbodiesofAustria,Belgium,Cyprus,CzechRepublic,Denmark,Estonia,Finland,France, Germany,Greece,Hungary,Iceland,Ireland,Italy,Latvia,Lithuania,Luxembourg,Ma

11、lta,Netherlands,Norway,Poland,Portugal, Slovakia, Slovenia,Spain,Sweden,SwitzerlandandUnitedKingdom. EUROPEANCOMMITTEEFORSTANDARDIZATION COMITEUROPENDENORMALISATION EUROPISCHESKOMITEEFRNORMUNG ManagementCentre:ruedeStassart,36B1050Brussels 2004CEN Allrightsofexploitationinanyformandbyanymeansreserve

12、d worldwideforCENnationalMembers. Ref.No.EN606:2004:EEN 606:2004 (E) 2 Contents page Foreword4 Introduction .5 1 Scope6 2 Normative references6 3 Terms and definitions .7 4 Requirements.7 4.1 General7 4.2 Materials, print and fixing .7 4.3 Active area7 4.4 Bar coded information 8 4.4.1 Linear bar co

13、ded information.8 4.4.2 Two-dimensional bar coded information 8 4.5 Human readable information9 4.6 Data elements.9 4.6.1 Selection and status9 4.6.2 Licence plate number9 4.6.3 Data element titles .10 4.6.4 Data identifiers.10 5 210 mm x 148 mm transport label10 5.1 General10 5.2 Linear bar codes 1

14、0 6 84 mm wide and 105 mm wide transport labels .16 6.1 General16 6.2 Active areas16 6.3 Data elements.16 6.3.1 General16 6.3.2 Mandatory elements17 6.3.3 Optional elements17 6.4 Bar codes17 6.4.1 Linear bar codes 17 6.4.2 Two dimensional bar codes17 6.5 Human readable information17 7 84 mm x 54 mm

15、handling label.23 7.1 General23 7.2 Mandatory elements23 7.3 Optional elements23 7.4 Linear bar codes 23 8 Base label.25 8.1 General25 8.2 Data element.25 8.3 Linear bar codes 25 Annex A (normative) Licence plate number.27 A.1 Scope27 A.2 Structure.27 A.3 Issuing Agency27 Annex B (normative) Data id

16、entifiers for licence plate number .28 B.1 Data identifier 1J28 EN 606:2004 (E) 3 B.2 Data identifier 6J for transport unit containing multiple entities of like items29 B.3 Data identifier 5J for transport unit containing multiple entities of unlike items .29 Annex C (normative) Complementary produc

17、t characteristics; Date area 15 in Table 1 30 C.1 Data area 1530 C.2 Data area 15A.30 C.2.1 One line of information .30 C.2.2 Two lines of information .30 C.3 Data area 15B.30 C.4 Data area 15C.31 C.5 Data area 15D.31 C.5.1 Introduction31 C.5.2 Uncoated flat products in sheet form31 C.5.3 Uncoated f

18、lat products in coil form .31 C.5.4 Long products31 Annex D (informative) Reference between data elements in the transport labels and the EDIFACT Despatch Advice Message (DESADV).32 D.1 Introduction32 D.2 Explanation of Table D.1.32 Annex E (informative) Illustration of transport labels .36 E.1 Illu

19、stration of 210 mm x 148 mm label (not to scale) .36 E.2 Illustration of 105 mm wide label (not to scale)37 E.3 Illustration of 84 mm x 54 mm handling label (not to scale) .37 E.4 Illustration of Base Labels (not to scale) 38 Annex F (informative) Trilingual titles for Data elements and Data identif

20、iers.39 F.1 Data area titles .39 F.2 Data identifiers.39 Bibliography40 EN 606:2004 (E) 4 Foreword This document (EN 606:2004) has been prepared by ECISS/WG11 under control of CEN /TC 225, “AIDC technologies“, the secretariat of which is NEN. This European Standard shall be given the status of a nat

21、ional standard, either by publication of an identical text or by endorsement, at the latest by February 2005, and conflicting national standards shall be withdrawn at the latest by February 2005 This document supersedes ENV 606:1992. This document is a development of and replaces the European Pre-st

22、andard ENV 606 approved by CEN in August 1992 as a prospective standard for provisional application. That provisional application in the trading of steel products together with the experience in its use and the publication of ISO 15394, provide the basis on which this document is established. This d

23、ocument, therefore, complies with ISO 15394 Bar code and two dimensional symbols for shipping, transport and receiving labels. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Be

24、lgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. EN 606:2004 (E) 5 Introduction In commo

25、n with most other industrial products, steel products, that is those defined in EN 10079, when despatched by the manufacturer, referred to in the document as the supplier, require labelling that will ensure delivery to the correct address of the buyer and allow accurate access to relevant informatio

26、n in the parties systems to initiate subsequent activities, e.g. recording, storing, handling, transportation, processing, invoicing, etc. The labels specified in this document provide standard elements of identifiable information formatted in standard layouts with bar codes according to standard sy

27、mbologies. It is considered that the use of this document will improve efficiency, reduce costs, provide for traceability (e.g. to EN ISO 9001) and minimise the proliferation of label designs. Maximum advantage is gained when such labels provide the physical link in business transactions between the

28、 parties using Electronic Data Interchange (EDI) systems allowing faster and accurate input and product transfer procedures and other associated advantages of electronic data processing. An Annex is included mapping those data elements that either shall or may be included on a bar coded label and th

29、e despatch advice message (DESADV) according to the EDIFACT directory D96.A. Steel products are manufactured and delivered in a variety of different shapes, sizes and methods of packaging and transport which can present problems as to the fixing and security of labels. This document specifies the tw

30、o label formats established previously in ENV 606:1992 which have found acceptance in the market place. Two other transport label formats and two handling label ones are specified providing flexibility as to their formats but with certain mandatory data elements, e.g. licence plate number, and a cho

31、ice of other data elements depending upon the requirements of the trading parties. The labels specified in this document are not necessarily associated with any particular steel product form; it is the responsibility of the supplier to select the label most appropriate to the trading parties require

32、ments. All labels include the data element Licence plate number, that is the unique identification of a transport unit as set out in ISO/IEC 15459 and required in ISO 15394. An Annex in this document sets out the structure of such a licence plate number and the means to obtain the necessary codes. E

33、N 606:2004 (E) 6 1 Scope This document specifies the requirements for labels containing human readable and bar coded information for fixing to steel products for the purpose of despatch, transport, and reception in accordance with the requirements of ISO 15394. Data elements are specified together w

34、ith their status, location on the label, the appropriate data identifier and choice of bar code symbology. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, t

35、he latest edition of the referenced document (including any amendments) applies. EN 1556:1998, Bar coding - Terminology. EN 10079:1992, Definition of steel products. EN ISO 216, Writing papers and certain classes of printed matter - Trimmed sizes - A and B series (ISO 216:1975). EN ISO/IEC 15416, In

36、formation technology - Automatic identification and data capture techniques - Bar code print quality test specification - Linear symbols (ISO/IEC 15416:2000). EN ISO/IEC 15438:2003, Information technology - Automatic identification and data capture techniques - Bar code symbology specifications - PD

37、F 417 (ISO/IEC 15438:2001). ISO 15394:2000, Packaging - Bar code and two-dimensional symbols for shipping, transport and receiving labels. ISO/IEC 15415, Information technology - Automatic identification and data capture techniques - Bar code print quality test specification - Two-dimensional symbol

38、s. ISO/IEC 15417, Information technology - Automatic identification and data capture techniques Bar code symbology specification - Code 128. ISO/IEC 15418:1999, Information technology - EAN/UCC Application Identifiers and FACT Data Identifiers and Maintenance. ISO/IEC 15434, Information technology -

39、 Transfer syntax for high capacity ADC media. ISO/IEC 15459-1:1999, Information technology - Unique identification of transport units - Part 1: General. ISO/IEC 15459-2:1999, Information technology - Unique identification of transport units - Part 2: Registration procedures. ISO/IEC 16022, Informati

40、on technology - International symbology specification Data matrix. ISO/IEC 16388, Information technology - Automatic identification and data capture techniques - Bar code symbology specifications - Code 39. ISO/IEC 18004, Information technology - Automatic identification and data capture techniques

41、- Bar code symbology - QR Code. ISO/DIS 19762, Information technology - Automatic identification and data capture techniques Harmonized Vocabulary, Part 1 - General terms relating to automatic identification and data capture. ANSI MH10.8.2, Data application identifier standard. EN 606:2004 (E) 7 3 T

42、erms and definitions For the purpose of this document, the terms and definitions given in EN 1556:1998, EN 10079:1992, ISO 15394:2000, EN ISO 15438:2003, ISO/IEC 15418:1999, ISO/IEC 15459:1999, ISO/IEC 19762, ANSI MH10.8.2 and the following apply. 3.1 active area defined area of a bar coded label co

43、ntaining specified data elements 3.2 receiver in a transaction, the party to whom the transport unit is consigned, who may be the buyer 3.3 supplier in a transaction, the party who produces or provides the transport unit or product 3.4 transport unit package intended for transportation comprising on

44、e or more articles, wrapped or unwrapped, and when multiple articles, constrained to form a unit 4 Requirements 4.1 General Bar coded labels for steel products shall be in accordance with ISO 15394. 4.2 Materials, print and fixing Label materials should be white with black printed information. Colou

45、r printing may be used for images, e.g. logos, symbols. Label materials and their fixing shall be selected taking account of the following: a) security of fixing for the useful life of the label. Self-adhesive label substrate shall be of 80 g/m 2weight minimum. Labels that are left free in a label h

46、older shall have a substrate of 150 g/m 2minimum. Attention should be given when using self-adhesive labels with their protective film as they have different dilatation values which may lead to bending of the label over the label holder; b) maintenance of readability, both visually and automatically

47、 for its useful life, i.e. despatch, transport, delivery and storage of the transport unit; c) environment, e.g. contamination, heat, and light, with particular regard to the temperature of the steel product during fixing, delivery and storage; d) ultimate disposal. 4.3 Active area Labels shall have

48、 a defined active area. Label size may exceed the active area at the discretion of the label issuer for the purpose of including other information and for fixing to the transport unit. Information printed outside the active area of the label shall not conflict, confuse or be incompatible with the information within the active area. EN 606:2004 (E) 8 4.4 Bar coded information 4.4.1 Linear bar coded information 4.4.1.1 Symbology Linear bar coded information shall use one of the following bar code symbologies: a) code 39 in accordance with ISO/IEC 16388; b) code 128 in