BS EN 581-2-2015 Outdoor furniture Seating and tables for camping domestic and contract use Mechanical safety requirements and test methods for seating《户外家具 野营 家用和商业用桌椅 第2部分 座椅的机械安.pdf

《BS EN 581-2-2015 Outdoor furniture Seating and tables for camping domestic and contract use Mechanical safety requirements and test methods for seating《户外家具 野营 家用和商业用桌椅 第2部分 座椅的机械安.pdf》由会员分享，可在线阅读，更多相关《BS EN 581-2-2015 Outdoor furniture Seating and tables for camping domestic and contract use Mechanical safety requirements and test methods for seating《户外家具 野营 家用和商业用桌椅 第2部分 座椅的机械安.pdf（16页珍藏版）》请在麦多课文档分享上搜索。

1、BS EN 581-2:2015Outdoor furniture Seatingand tables for camping,domestic and contract usePart 2: Mechanical safety requirements andtest methods for seatingIncorporating corrigendum July 2016BSI Standards PublicationWB11885_BSI_StandardCovs_2013_AW.indd 1 15/05/2013 15:06BS EN 581-2:2015 BRITISH STAN

2、DARDNational forewordThe UK participation in its preparation was entrusted by TechnicalCommittee FW/0, Furniture, to Subcommittee FW/0/2, Domestic andA list of organizations represented on this subcommittee can beobtained on request to its secretary.This publication does not purport to include all t

3、he necessaryprovisions of a contract. Users are responsible for its correctapplication. The British Standards Institution 2016.Published by BSI Standards Limited 2016ISBN 978 0 580 95272 2ICS 97.140; 97.200.30Compliance with a British Standard cannot confer immunity fromlegal obligations.This Britis

4、h Standard was published under the authority of theStandards Policy and Strategy Committee on 30 November 2015.Amendments/corrigenda issued since publicationDate T e x t a f f e c t e d31 August 2016 Implementation of CEN corrigendum July 2016Contract Furniture.The start and finish of text introduce

5、d or altered by corrigendum isindicated in the text by tags. Text altered by CEN corrigendum July2016 is indicated in the text by .This British Standard is the UK implementation of EN 581-2:2015, incorporating corrigendum July 2016. It supersedes BS EN 581-2:2009 which is withdrawn.EUROPEAN STANDARD

6、 NORME EUROPENNE EUROPISCHE NORM EN 581-2 November 2015 ICS 97.140; 97.200.30 Supersedes EN 581-2:2009English Version Outdoor furniture - Seating and tables for camping, domestic and contract use - Part 2: Mechanical safety requirements and test methods for seating Mobilier dextrieur - Siges et tabl

7、es usages domestique, collectif et de camping - Partie 2: Exigences de scurit, de rsistance et de durabilit pour les siges Auenmbel - Sitzmbel und Tische fr den Camping-, Wohn- und Objektbereich - Teil 2: Mechanische Sicherheitsanforderungen und Prfverfahren fr Sitzmbel This European Standard was ap

8、proved by CEN on 12 September 2015. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nat

9、ional standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own lang

10、uage and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece

11、, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey andUnited Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG CEN

12、-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2015 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 581-2:2015 EIncorporating corrigendum July 2016BS EN 581-2:2015EN 581-2:2015 (E) 2 Contents Page European foreword .

13、 3 1 Scope 4 2 Normative references 4 3 Terms and definitions . 4 4 Testing . 5 5 Test equipment 5 6 Safety, strength and durability requirements for loungers . 5 6.1 General 5 6.2 Stability, strength and durability 5 6.2.1 Test sequence and parameters 5 6.2.2 Requirements . 6 7 Safety, strength and

14、 durability requirements for other seating 7 7.1 General 7 7.2 Stability, strength and durability 7 7.2.1 Test sequence and parameters 7 7.2.2 Requirements . 8 8 Information for use 8 8.1 General 8 8.2 Marking for loungers . 8 9 Test report . 9 Annex A (normative) Forward and sideways stability test

15、s for loungers 10 A.1 Test procedure 10 Annex B (informative) Purchase information (guidelines) . 12 BS EN 581-2:2015EN 581-2:2015 (E) 3 European foreword This document (EN 581-2:2015) has been prepared by Technical Committee CEN/TC 207 “Furniture”, the secretariat of which is held by UNI. This Euro

16、pean Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by May 2016, and conflicting national standards shall be withdrawn at the latest by May 2016. Attention is drawn to the possibility that some of the elements of

17、 this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. This document supersedes EN 581-2:2009. Compared to the current version, the main modifications are: new requirements for tests, and loungers are no lon

18、ger in an annex but in the standard, which is a simplification of the standard (requirements and clauses harmonized with the Clause 7 of the standard); a simplification of chapters has been made: test equipment; a modification of reference (EN 1728:2012) has been made. According to the CEN/CENELEC I

19、nternal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland

20、, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. BS EN 581-2:2015EN 581-2:2015 (E) 4 1 Scope This European Standard specifies the minimum requirements for the safety,

21、 strength and durability of all types of outdoor seating for adults, without regard to materials, design/construction or manufacturing processes. It does not apply to street furniture. It does not apply to removable upholstery and covering. It does not include requirements for the durability of cast

22、ors/wheels and height adjustment mechanisms. It does not include requirements for electrical safety. It does not include requirements for the resistance to ageing and degradation caused by light, temperature and moisture. The test requirements contained within this standard are based on use by perso

23、ns weighing up to 110 kg. 2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced doc

24、ument (including any amendments) applies. EN 581-1, Outdoor furniture Seating and tables for camping, domestic and contract use Part 1: General safety requirements EN 1022:2005, Domestic furniture Seating Determination of stability EN 1728:2012, Furniture Seating Test methods for the determination o

25、f strength and durability 3 Terms and definitions For the purposes of this document, the following terms and definitions apply. 3.1 outdoor seating for contract use outdoor seating intended for non-private use in places with public access 3.2 outdoor seating for domestic use outdoor seating intended

26、 for private use in places use without public access 3.3 outdoor seating for camping use outdoor seating foldable or knock-down and light-weight, intended for use in connection with camping and travelling 3.4 lounger seating intended for reclined posture with at least one backrest position with an “

27、teta angle” between 0 and 45 and a leg rest which is integral part of the product and which is intended to support the full body weight of a user Note 1 to entry: Figure 1 shows teta angle in lounger. BS EN 581-2:2015EN 581-2:2015 (E) 5 Key teta anfla Figure 1 Teta angle in lounger 3.5 street furnit

28、ure outdoor furniture use in public space, permanently fixed to the ground or any structure (e.g. bus stop, wall) or not able to be manually removed 4 Testing Testing shall be carried out as specified in EN 1728 and EN 1022. With the exception of seating with a seat and back made of one piece of fle

29、xible material (e.g. textile), attached at the upper and lower edges only, seat and back loading points shall be determined according to EN 1728. For seating with a seat and back made of one piece of flexible material (e.g. textile), attached at the upper and lower edges only, the loading point shal

30、l be the lowest point when a rolling cylinder (Clause 5) is placed in the seating. 5 Test equipment In derogation to EN 1728 and EN 1022, the loading position template for seating with seat and back made of one suspended or hanging piece of flexible material (e.g. textile) shall be a cylinder with a

31、 mass of (1 0,5) kg and a diameter of (70 10) mm. Axis of the cylinder shall be perpendicular to the median plane of the seat. Let the cylinder roll from the higher part of the top front of the flexible part. Where the cylinder stops the seat load shall be applied. NOTE A suitable length of the cyli

32、nder is 200 mm. 6 Safety, strength and durability requirements for loungers 6.1 General Before and after the strength, durability and stability tests are carried out, the EN 581-1 requirements shall be fulfilled. 6.2 Stability, strength and durability 6.2.1 Test sequence and parameters The lounger s

33、hall be tested following the order listed in Table 1. BS EN 581-2:2015EN 581-2:2015 (E) 6 Table 1 Test sequence and test parameters for loungers Test References Test parameters Camping Domestic Contract 1. Seat and back static load test aEN 1728:2012, 8.2 Specified seat load, N Specified backrest lo

34、ad, N Minimum specified force F2 (back), N Cycles Additional cycle 30 min 10 s 1 100 - - 10 1 1 600 410 360 10 1 2 000 560 500 10 1 2. Additional seat and leg rest static load testEN 1728:2012, 8.3 Seat load on loading point, N Force applied on D-E point, N 750 600 750 900 750 900 3. Seat and back d

35、urability test EN 1728:2012, 8.4.1 Specified seat load, N Specified backrest load, N Minimum specified force F4 (back), N Cycles 750 250 220 12 500 1 000 333 300 25 000 1 000 333 300 50 000 4. Additional seat durability test EN 1728:2012, 8.4.2 Specified force, N Cycles 750 5 000 1 000 10 000 1 000

36、20 000 5. Durability test on back rest mechanism EN 1728:2012, 8.5 Specified force, N Seat load, N Cycles 190 1 000 5 000 250 1 000 10 000 250 1 000 20 000 6. Arm rest static load test EN 1728:2012, 8.6 Vertical specified Force, N - 700 900 b7. Arm rest durability test EN 1728:2012, 8.7 Specified fo

37、rce, N Cycles 400 5 000 400 10 000 400 30 000 8. Impact test EN 1728:2012, 8.8 Drop height, mm Cycles 140 10 180 10 240 10 9. Lifting test for mobile loungers EN 1728:2012, 8.9 Load, N Cycles 1 000 500 1 000 1 000 1 000 2 000 10. Forward stability c, dA.1.2 11. Rearward stability cEN 1022:2005, 6.6

38、for upright position and 7.5 for most reclined position 12. Sideways stability c, dA.1.1 aIf seat and back are of one piece of flexible material (e.g. textile), only the tests on seat shall be carried out. bIf armrest is less than 15 mm wide, carry out test with 700 N. cIn the case of seating which

39、might not fulfil the stability requirements before carrying out any tests, the applicable stability tests may be carried out before starting the sequence of tests specified in this table. dThis test is not applicable for seating with a seat height 600 mm. dThis test is carried out only on seating wi

40、th a seat height 700 mm. eThis test is not applicable for seating with a seat height 200 mm and a mass 5 kg. The height shall be determined by measuring from the floor to the upper seating area on the geometrical centre of the unload seat. fIn the case of seating which might not fulfil the stability

41、 requirements before carrying out any tests, the applicable stability tests may be carried out before starting the sequence of tests specified in this table. 7.2.2 Requirements The safety, strength and durability requirements are fulfilled after testing in accordance with Table 2 when: a) there are

42、no fractures of any joint, member or component, b) there is no loosening of joints intended to be rigid, c) the seating fulfils its function after removal of the test loads, d) the seating fulfils the safety requirements, e) the product shall not overturn when subjected to the stability tests. 8 Inf

43、ormation for use 8.1 General Instruction for use shall be provided in the language(s) of the country where the seating are sold. These instructions shall be headed “IMPORTANT, RETAIN FOR FUTURE REFERENCE: READ CAREFULLY“ in letters no less than 5 mm high, unless if the following information are perm

44、anently marked on the product. It shall contain at least the following details: a) name and address of the manufacturer/supplier/retailer; b) conditions for use of the product (domestic, camping or contract). If applicable: c) assembly instructions; d) instructions for the care and maintenance of th

45、e seating; e) if the seating is fitted with seat height adjustments with energy accumulators, an additional note is required pointing out that only trained personnel may replace or repair seat height adjustment components with energy accumulators. 8.2 Marking for loungers Loungers equipped with whee

46、ls, but not intended to be lifted and moved with a person in it shall be permanently marked with the pictogram as shown in Figure 2. The smallest dimension of the pictogram shall not be less than 25 mm. BS EN 581-2:2015EN 581-2:2015 (E) 9 Figure 2 Pictogram 9 Test report The test report shall includ

47、e at least the following information: a) reference to this part of the European Standard; b) details of piece of furniture tested; c) use of the product (Camping, Domestic or Contract); d) any defects observed before testing; e) the test results according to the applicable clauses; f) compliance wit

48、h the requirements; g) the name and address of the test facility; h) the date of test. BS EN 581-2:2015EN 581-2:2015 (E) 10 Annex A (normative) Forward and sideways stability tests for loungers A.1 Test procedure A.1.1 Sideways stability The seat loading points shall be on a line 60 mm from the side

49、 edge and the first point shall be 300 mm from the front edge. The following loading points shall be placed at least 600 mm apart from each other and at least 300 mm from an armrest or the rear edge of the lounger. See Figure A.1. The forces shall be applied using the loading pad defined in EN 1022:2005, 4.2. If the arm rest is more than 400 mm in length apply additional vertical force FB.2in the centre of it. Apply simultaneously the downwards forces FB.1on seat as specified in Table A.1 and the load on the arm re