BS EN 54-10-2002 Fire detection and fire alarm systems - Flame detectors - Point detectors《火灾探测和火灾警报系统 火焰探测器 着火位置探测器》.pdf

《BS EN 54-10-2002 Fire detection and fire alarm systems - Flame detectors - Point detectors《火灾探测和火灾警报系统 火焰探测器 着火位置探测器》.pdf》由会员分享，可在线阅读，更多相关《BS EN 54-10-2002 Fire detection and fire alarm systems - Flame detectors - Point detectors《火灾探测和火灾警报系统 火焰探测器 着火位置探测器》.pdf（52页珍藏版）》请在麦多课文档分享上搜索。

1、BRITISH STANDARD BS EN 54-10:2002 Incorporating Amendment No. 1 and Corrigendum No. 1 Fire detection and fire alarm systems Part 10: Flame detectors Point detectors The European Standard EN 54-10:2001, with the incorporation of amendment A1:2005, has the status of a British Standard ICS 13.220.20 Li

2、censed Copy: Wang Bin, na, Mon Dec 18 07:35:01 GMT+00:00 2006, Uncontrolled Copy, (c) BSIBS EN 54-10:2002 This British Standard, having been prepared under the direction of the Health and Environment Sector Policy and Strategy Committee, was published under the authority of the Standards Policy and

3、Strategy Committee on 14 February 2002 BSI 2006 ISBN 0 580 39035 7 National foreword This British Standard is the official English language version of EN 54-10:2001 including amendment A1:2005. The UK participation in its preparation was entrusted by Technical Committee FSH/12, Fire detection and al

4、arm systems, to Subcommittee FSH/12/2, Fire detectors, which has the responsibility to: A list of organizations represented on this subcommittee can be obtained on request to its secretary. Cross-references The British Standards which implement international or European publications referred to in t

5、his document may be found in the BSI Catalogue under the section entitled “International Standards Correspondence Index”, or by using the “Search” facility of the BSI Electronic Catalogue or of British Standards Online. This publication does not purport to include all the necessary provisions of a c

6、ontract. Users are responsible for its correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. aid enquirers to understand the text; present to the responsible international/European committee any enquiries on the interpretation, or proposal

7、s for change, and keep UK interests informed; monitor related international and European developments and promulgate them in the UK. Summary of pages This document comprises a front cover, an inside front cover, the EN title page, pages 2 to 48, an inside back cover and a back cover. The BSI copyrig

8、ht notice displayed in this document indicates when the document was last issued. Amendments issued since publication Amd. No. Date Comments 16127 31 July 2006 Introduction of annex ZA and Bibliography 16593 Corrigendum No. 1 29 September 2006 Correction to EN foreword Licensed Copy: Wang Bin, na, M

9、on Dec 18 07:35:01 GMT+00:00 2006, Uncontrolled Copy, (c) BSIEUROPEANSTANDARD NORMEEUROPENNE EUROPISCHENORM EN5410 January2002 ICS13.220.20 Englishversion FiredetectionandfirealarmsystemsPart10:Flamedetectors Pointdetectors SystmesdedtectionetdalarmedincendiePartie10: DtecteursdeflammeDtecteursponct

10、uels BrandmeldeanlagenTeil10:Flammenmelder PunktfrmigeMelder ThisEuropeanStandardwasapprovedbyCENon3November2001. CENmembersareboundtocomplywiththeCEN/CENELECInternalRegulationswhichstipulatetheconditionsforgivingthisEurope an Standardthestatusofanationalstandardwithoutanyalteration.Uptodatelistsand

11、bibliographicalreferencesconcernings uchnational standardsmaybeobtainedonapplicationtotheManagementCentreortoanyCENmember. ThisEuropeanStandardexistsinthreeofficialversions(English,French,German).Aversioninanyotherlanguagemadebytra nslation undertheresponsibilityofaCENmemberintoitsownlanguageandnoti

12、fiedtotheManagementCentrehasthesamestatusasthe official versions. CENmembersarethenationalstandardsbodiesofAustria,Belgium,CzechRepublic,Denmark,Finland,France,Germany,Greece, Iceland,Ireland,Italy,Luxembourg,Malta,Netherlands,Norway,Portugal,Spain,Sweden,SwitzerlandandUnitedKingdom. EUROPEANCOMMITT

13、EEFORSTANDARDIZATION COMITEUROPENDENORMALISATION EUROPISCHESKOMITEEFRNORMUNG ManagementCentre:ruedeStassart,36B1050Brussels 2002CEN Allrightsofexploitationinanyformandbyanymeansreserved worldwideforCENnationalMembers. Ref.No.EN5410:2002E + A1 November 2005 Licensed Copy: Wang Bin, na, Mon Dec 18 07:

14、35:01 GMT+00:00 2006, Uncontrolled Copy, (c) BSIEN5410:2002(E) 2 Contents Foreword. 4 1 2 3 Termsanddefinitions. 5 4 4.1 Compliance 6 4.2 Classification. 6 4.3 Individualalarmindication. 6 4.4 4.5 4.6 4.7 4.8 4.9 Additionalrequirementsforsoftwarecontrolleddetectors . 7 4.9.1 General. 7 4.9.2 4.9.3 S

15、oftwaredesign . . 8 4.9.4 5 5.1 5.1.1 5.1.2 5.1.3 Mountingarrangements . 9 5.1.4 5.1.5 5.1.6 Testprocedure 10 5.1.7 5.1.8 5.1.9 5.2 5.2.1 5.2.2 5.2.3 5.3 5.3.1 5.3.2 5.3.3 5.4 5.4.1 5.4.2 5.4.3 5.5 5.5.1 5.5.2 5.5.3 5.5.4 5.6 5.6.1 5.6.2 5.6.3 5.7 5.7.1 5.7.2 5.7.3 Scope . 5 Normativereferences . 5

16、Generalrequirements . 6 Connectionofancillarydevices. . 6 Monitoringofdetachabledetectors 7 Manufacturersadjustments 7 Data 7 Onsitesensitivityadjustment . 7 Softwaredocumentation 8 Thestorageofprogramsanddata 9 Tests. 9 General. 9 Atmosphericconditionsfortests 9 Operatingconditionsfortests . 9 Tole

17、rances . 10 Determinationofresponsepoint. 10 Reducedfunctionaltests . 11 Provisionfortests . . 11 Testschedule . . 11 Reproducibility 12 Object. 12 Testprocedure 12 Requirements 12 Repeatability 13 Object. 13 Testprocedure 13 Requirements 13 Directionaldependence . 13 Object. 13 Testprocedure 13 Req

18、uirements 13 Firesensitivity. 15 Object. 15 Testprocedure 15 Classification. 15 Requirements 17 Dazzling(operational) . 17 Object. 17 Testprocedureandapparatus 17 Requirements 18 Dryheat(operational) . 18 Object . 18 Testprocedureandapparatus . 18 Requirements 19 Licensed Copy: Wang Bin, na, Mon Dec

19、 18 07:35:01 GMT+00:00 2006, Uncontrolled Copy, (c) BSIEN5410:2002(E) 3 5.9 5.9.1 5.9.2 5.9.3 5.10 5.10.1 5.10.2 5.10.3 5.11 Sulfurdioxide(SO 2 5.11.1 5.11.2 5.11.3 5.12 5.12.1 5.12.2 5.12.3 5.13 5.13.1 5.13.2 5.13.3 5.14 5.14.1 5.14.2 5.14.3 5.15 5.15.1 5.15.2 5.15.3 5.16 5.16.1 5.16.2 5.16.3 5.17

20、5.17.1 5.17.2 5.17.3 6 Anne A.1 A.2 A.3 A.4 A.5 Anne C.1 Annex ZA (informative) Clauses addressing the provisions of the EU Construction Products Directive 5.8 5.8.1 5.8.2 5.8.3 Cold(operational) 19 Object . 19 Testprocedureandapparatus . 19 Requirements 19 Damp heat, cyclic (operational) . 20 Objec

21、t . 20 Test procedure and apparatus. 20 Requirements 20 Damp heat, steady state (endurance) . 21 Object . 21 Test procedure and apparatus. 21 Requirements 21 ) corrosion (endurance). 21 Object . 21 Test procedure and apparatus. 22 Requirements 22 Shock (operational). 22 Object . 22 Test procedure an

22、d apparatus. 22 Requirements 23 Impact (operational) 23 Object . 23 Test procedure and apparatus. 23 Requirements 24 Vibration, sinusoidal, (operational). 24 Object . 24 Test procedure and apparatus. 24 Requirements 25 Vibration, sinusoidal (endurance) . 25 Object . 25 Test procedure and apparatus.

23、26 Requirements 26 Variation in supply parameters (operational). 26 Object . 26 Test procedure 27 Requirements 27 Electromagnetic Compatibility (EMC), Immunity tests (operational) 27 Object . 27 Test procedure and apparatus. 27 Requirements 28 Marking. 28 x A (normative) Apparatus for response point

24、 determination . 29 Optical bench. 29 Radiation source . 29 Shutter 29 Modulator. 30 Radiometer. 31 x B (informative) Example of a methane burner. 32 Annex C (normative) Test fires . 34 Methylated spirit fire . 34 Annex D (normative) Apparatus for dazzling test . 36 Annex E (normative) Apparatus for

25、 impact test. 38 89/106/EEC40 Bibliography 48 Licensed Copy: Wang Bin, na, Mon Dec 18 07:35:01 GMT+00:00 2006, Uncontrolled Copy, (c) BSIEN5410:2002(E) 4 TheannexesA,CandDarenormative.TheannexesBandEareinformative. For relationship with EU Directive(s), see informative Annex ZA, which is an integral

26、 part of this document. This Amendment to the European Standard EN 54-10:2002 shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by May 2006, and conflicting national standards shall be withdrawn at the latest by August 2007.

27、 This Amendment to EN 54-10:2002 has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association and supports the essential requirements of the EU Construction Products Directive (89/106/EEC). According to the CEN/CENELEC Internal Regulations, the na

28、tional standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland,

29、Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. giveninannexAofEN541:1996. InformationontherelationshipbetweenthisEuropeanStandardandotherstandardsoftheEN54seriesis This document (EN 54-10:2002/A1:2005) has been prepared by Technical Committee CEN/TC 72 “Fire detection a

30、nd fire alarm systems”, the secretariat of which is held by BSI. ForewordtoamendmentA1 Foreword This European Standard shallb eg iven the status ofanational standard, either by publication of an identical texto r by endorsement, at thel atestb y July 2002, andc onflictingn ational standards shall be

31、 withdrawna t the latestb y July 2004. For products whichh avec omplied with the relevant n ational standardb eforet he date of withdrawal (dow), as shownb y them anufacturer or by ac ertificationb ody, this previous standard may continue to apply for production until July 2007 . According to the CE

32、N/CENELECI nternalR egulations, then ational standards organizations of thef ollowing countriesa re bound to implement this European Standard :A ustria,B elgium,C zechR epublic,D enmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands,N orway, Portugal,S pai

33、n,S weden,S witzerland and the UnitedK ingdom . Information on the relationshipb etween this EuropeanS tandarda nd other standards of the EN 54 series is given in annex Ao fE N5 4-1:1996. Thea nnexes A,Ca nd Da re normative. Thea nnexes B and Ea re informative . This document (EN 54-10) has been pre

34、pared by Technical Committee CEN/TC 72 “Fire detection and fire alarm systems”, the secretariat of which is held by BSI. Licensed Copy: Wang Bin, na, Mon Dec 18 07:35:01 GMT+00:00 2006, Uncontrolled Copy, (c) BSIEN5410:2002(E) 5 IEC60068227:1987,EnvironmentaltestingPart2:TestsTestEaandguidance:Shock

35、 IEC60068230:1980,BasicenvironmentaltestingprocedurePart2:TestDbandguidance:Dampheat, cyclic(12+12hourcycle) IEC60068242:1982,BasicenvironmentaltestingprocedurePart2:TestKc:Sulphurdioxidetestfor contactsandconnections IEC60068256:1988,EnvironmentaltestingPart2:TestsTestCb:Dampheat,steadystate,primar

36、ily forequipment EN501304,AlarmsystemsPart4:ElectromagneticcompatibilityProductfamilystandard:Immunity requirementsforcomponentsoffire,intruderandsocialalarmsystems 3 Termsanddefinitions ForthepurposesofthisEuropeanStandard,thefollowingtermsanddefinitionsapply. 3.1 infrared(IR)detector aflamedetecto

37、rrespondingonlytoradiationhavingwavelengthsgreaterthan850nm 3.2 ultraviolet(UV)detector aflamedetectorrespondingonlytoradiationhavingwavelengthslessthan300nm 1Scope ThisEuropeanStandardspecifiesrequirements,testmethodsandperformancecriteriaforpointtype, resettableflamedetectorsthatoperateusingradiat

38、ionfromaflameforuseinfiredetectionsystemsinstalled inbuildings. Thisstandarddoesnotcoverflamedetectorsworkingondifferentprinciplesfromthosedescribedinthis standard(althoughthestandardmaybeusedasguidanceinassessingsuchproducts). 2 Normativereferences ThisEuropeanStandardincorporatesbydatedorundatedre

39、ference,provisionsfromotherpublications. Thesenormativereferencesarecitedattheappropriateplacesinthetextandthepublicationsarelisted hereafter.Fordatedreferences,subsequentamendmentstoorrevisionsofanyofthesepublicationsapply tothisEuropeanStandardonlywhenincorporatedinitbyamendmentorrevision.Forundat

40、edreferences thelatesteditionofthepublicationreferredtoapplies(includingamendments). EN541:1996,FiredetectionandfirealarmsystemsPart1:Introduction ISO2091,WroughtaluminiumandaluminiumalloysChemicalcompositionandformsofproductsPart 1:Chemicalcomposition IEC60064,Tungstenfilamentlampsfordomesticandsim

41、ilargenerallightingpurposesPerformance requirements IEC600681,EnvironmentaltestingPart1:Generalandguidance IEC6006821:1990,EnvironmentaltestingPart2:TestsTestsA:Cold IEC6006822:1974,BasicenvironmentaltestingproceduresPart2:TestsTestsB:Dryheat IEC6006826:1995,EnvironmentaltestingPart2:TestsTestFc:Vib

42、ration(sinusoidal) Licensed Copy: Wang Bin, na, Mon Dec 18 07:35:01 GMT+00:00 2006, Uncontrolled Copy, (c) BSIEN5410:2002(E) 6 4 Generalrequirements 4.1Compliance Inordertocomplywiththisstandardthedetectorshallmeettherequirementsofthisclause,whichshallbe verifiedbyvisualinspectionorengineeringassess

43、ment,shallbetestedasdescribedinclause5andshall meettherequirementsofthetests. 4.2Classification Detectorsshallconformtooneormoreofthefollowingclassifications:Class1,Class2orClass3according totherequirementsofthetestsspecifiedin5.5. 4.3Individualalarmindication Eachdetectorshallbeprovidedwithanintegr

44、alredvisualindicator,bywhichtheindividualdetector,which releasedanalarm,maybeidentified,untilthealarmconditionisreset.Whereotherconditionsofthe detectormaybevisuallyindicated,theyshallbeclearlydistinguishablefromthealarmindication,except whenthedetectorisswitchedintoaservicemode.Fordetachabledetecto

45、rstheindicatormaybeintegral withthebaseorthedetectorhead. 4.4Connectionofancillarydevices Wherethedetectorprovidesforconnectionstoancillarydevices(e.g.remoteindicators,controlrelaysetc.), openorshortcircuitfailuresoftheseconnectionsshallnotpreventthecorrectoperationofthedetector. 3.4 sensitivity ame

46、asureoftheabilityofaflamedetectortodetectfires NOTE Sensitivityisnotnecessarilydirectlyrelatedtotheresponsepoint. 3.5 detectorclassification aclassificationofflamedetectorstoindicatetheirrelativesensitivitytofire NOTE Class1indicatesthehighestsensitivityandClass3thelowestsensitivityacceptablewithinthisEuropean standard. 3.6 responsepoint distanceD,measuredin