BS EN 4701-003-2013 Aerospace series Connectors optical rectangular modular operating temperature 125C for EN 4531-101 contacts Module series 2 Product standard《航空航天系列 EN 4531-101 .pdf

《BS EN 4701-003-2013 Aerospace series Connectors optical rectangular modular operating temperature 125C for EN 4531-101 contacts Module series 2 Product standard《航空航天系列 EN 4531-101 .pdf》由会员分享，可在线阅读，更多相关《BS EN 4701-003-2013 Aerospace series Connectors optical rectangular modular operating temperature 125C for EN 4531-101 contacts Module series 2 Product standard《航空航天系列 EN 4531-101 .pdf（12页珍藏版）》请在麦多课文档分享上搜索。

1、raising standards worldwideNO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBSI Standards PublicationBS EN 4701-003:2013Aerospace series Connectors, optical,rectangular, modular, operatingtemperature 125 C, for EN4531-101 contactsPart 003: Module series 2 ProductstandardBS EN 47

2、01-003:2013 BRITISH STANDARDNational forewordThis British Standard is the UK implementation of EN 4701-003:2013.The UK participation in its preparation was entrusted to TechnicalCommittee ACE/6, Aerospace avionic electrical and fibre optictechnology.A list of organizations represented on this commit

3、tee can beobtained on request to its secretary.This publication does not purport to include all the necessaryprovisions of a contract. Users are responsible for its correctapplication. The British Standards Institution 2013. Published by BSI StandardsLimited 2013ISBN 978 0 580 80967 5ICS 49.090Compl

4、iance with a British Standard cannot confer immunity fromlegal obligations.This British Standard was published under the authority of theStandards Policy and Strategy Committee on 30 June 2013.Amendments issued since publicationDate Text affectedBS EN 4701-003:2013EUROPEAN STANDARD NORME EUROPENNE E

5、UROPISCHE NORM EN 4701-003 May 2013 ICS 49.090 English Version Aerospace series - Connectors, optical, rectangular, modular, operating temperature 125 C, for EN 4531-101 contacts - Part 003: Module series 2 - Product standard Srie arospatiale - Connecteurs optiques rectangulaires, modulaires, tempra

6、ture dutilisation 125 C, pour contacts EN 4531-101 - Partie 003: Module srie 2 - Norme de produit Luft- und Raumfahrt - Optischer Rechtecksteckverbinder in modularer Bauweise, Betriebstemperatur 125 C, fr EN 4531-101-Kontakte - Teil 003: Modul Serie 2 - ProduktnormThis European Standard was approved

7、 by CEN on 19 January 2013. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national st

8、andards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and

9、 notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungar

10、y, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management

11、 Centre: Avenue Marnix 17, B-1000 Brussels 2013 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 4701-003:2013: EBS EN 4701-003:2013EN 4701-003:2013 (E) 2 Contents Page Foreword 3 1 Scope 4 2 Normative references 4 3 Terms and defin

12、itions .4 4 Required characteristics .5 5 Designation 7 6 Marking .7 7 Technical specification .7 BS EN 4701-003:2013EN 4701-003:2013 (E) 3 Foreword This document (EN 4701-003:2013) has been prepared by the Aerospace and Defence Industries Association of Europe - Standardization (ASD-STAN). After en

13、quiries and votes carried out in accordance with the rules of this Association, this Standard has received the approval of the National Associations and the Official Services of the member countries of ASD, prior to its presentation to CEN. This European Standard shall be given the status of a natio

14、nal standard, either by publication of an identical text or by endorsement, at the latest by November 2013, and conflicting national standards shall be withdrawn at the latest by November 2013. Attention is drawn to the possibility that some of the elements of this document may be the subject of pat

15、ent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cr

16、oatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and

17、 the United Kingdom. BS EN 4701-003:2013EN 4701-003:2013 (E) 4 1 Scope This European Standard specifies the characteristics of module for EN 4531-101 optical termini, in the family of rectangular, modular, connector EN 4165. 2 Normative references The following documents, in whole or in part, are no

18、rmatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 2424, Aerospace series Marking of aerospace products EN

19、4165-003, Aerospace series Connectors, electrical, rectangular, modular Operating temperature 175 C continuous Part 003: Modules series 2 and series 3 Product standard EN 4531-101, Aerospace series Connectors, optical, circular, single and multipin, coupled by triple start threaded ring Flush contac

20、ts Part 101: Optical contact for EN 4641-100 cable 55 C to 125 C Product standard EN 4701-001, Aerospace series Connectors, optical, rectangular, modular, operating temperature 125 C, for EN 4531-101 contacts Part 001: Technical specification EN 4701-002, Aerospace series - Connectors, optical, rect

21、angular, modular, operating temperature 125 C, for EN 4531-101 contacts - Part 002: Specification of performance3 Terms and definitions For the purposes of this document, the terms and definitions given in EN 4701-001 apply. BS EN 4701-003:2013EN 4701-003:2013 (E) 5 4 Required characteristics 4.1 Di

22、mensions and masses 4.1.1 Male module interface dimensions Series 2 See Figure 1. Dimensions and tolerances are in millimetres. Interfacial seal Key 1 Guiding pin 2 Interfacial seal 3 Coding location (see EN 4165-003) 4 Optional design for sealed version Figure 1 Maximum mass: 4,70 g. Others dimensi

23、ons, see EN 4165-003. BS EN 4701-003:2013EN 4701-003:2013 (E) 6 4.1.2 Female module interface dimensions Series 2 See Figure 2. Dimensions and tolerances are in millimetres. Key 1 Centring cavity 2 Coding location (see EN 4165-003) 3 Optional design for sealed version Figure 2 Maximum mass: 6,20 g.

24、Others dimensions, see EN 4165-003. 4.2 Material and surface treatment See EN 4701-002. BS EN 4701-003:2013EN 4701-003:2013 (E) 7 4.3 Optical, mechanical and climatic characteristics See EN 4701-001. 5 Designation EXAMPLE Description block OPTICAL MODULES Identification block EN4701A04ELXXX Number o

25、f the basic standard Module series Series 2 = A Module arrangement 04 = 4 cavities EL = Termini according EN 4531-101 Peripherical sealing Unsealed = 1 Sealed = 2 Polarization (see EN 4165-003) N = Normal, or A, B, C, D Modules type Male = P Female = S 6 Marking The marking shall include the identif

26、ication defined in Clause 5, the date of manufacture (year, week) and the name or trade mark of the manufacturer or conform to standard EN 2424, code P, if required. 7 Technical specification See EN 4701-001. This page deliberately left blankThis page deliberately left blankBSI is the independent na

27、tional body responsible for preparing British Standards and other standards-related publications, information and services. It presents the UK view on standards in Europe and at the international level. BSI is incorporated by Royal Charter. British Standards and other standardisation products are pu

28、blished by BSI Standards Limited.British Standards Institution (BSI)raising standards worldwideBSI389 Chiswick High Road London W4 4AL UKTel +44 (0)20 8996 9001Fax +44 (0)20 8996 Standards and PASs are periodically updated by amendment or revision. Users of British Standards and PASs should make su

29、re that they possess the latest amendments or editions.It is the constant aim of BSI to improve the quality of our products and services. We would be grateful if anyone finding an inaccuracy or ambiguity while using British Standards would inform the Secretary of the technical committee responsible,

30、 the identity of which can be found on the inside frontcover. Similary for PASs, please notify BSI Customer Services.Tel: +44 (0)20 8996 9001 Fax: +44 (0)20 8996 7001BSI offers BSI Subscribing Members an individual updating service called PLUS which ensures that subscribers automatically receive the

31、 latest editions of British Standards and PASs.Tel: +44 (0)20 8996 7669 Fax: +44 (0)20 8996 7001Email: Buying standardsYou may buy PDF and hard copy versions of standards directly using acredit card from the BSI Shop on the website addition all orders for BSI, international and foreign standards pu

32、blicationscan be addressed to BSI Customer Services.Tel: +44 (0)20 8996 9001 Fax: +44 (0)20 8996 7001Email: In response to orders for international standards, BSI will supply the British Standard implementation of the relevant international standard, unless otherwise requested.Information on standar

33、dsBSI provides a wide range of information on national, Europeanand international standards through its Knowledge Centre.Tel: +44 (0)20 8996 7004 Fax: +44 (0)20 8996 7005Email: BSI Subscribing Members are kept up to date with standards developments and receive substantial discounts on the purchase p

34、riceof standards. For details of these and other benefits contact Membership Administration. Tel: +44 (0)20 8996 7002 Fax: +44 (0)20 8996 7001 Email: Information regarding online access to British Standards and PASs via British Standards Online can be found at information about British Standards i

35、s available on the BSI website at www.bsi- the data, software and documentation set out in all British Standards and other BSI publications are the property of and copyrighted by BSI, or some person or entity that own copyright in the information used (such as the international standardisation bodie

36、s) has formally licensed such information to BSI for commerical publication and use. Except as permitted under the Copyright, Designs and Patents Act 1988 no extract may be reproduced, stored in a retrieval system or transmitted in any form or by any means electronic, photocopying, recording or othe

37、rwise without prior written permission from BSI. This does not preclude the free use, in the course of implementing the standard, of necessary details such as symbols, and size, type or grade designations. If these details are to be used for any other purpose than implementation then the prior written permission of BSI must be obtained. Details and advice can be obtained from the Copyright & Licensing Department.Tel: +44 (0)20 8996 7070Email: