BS EN 4335-2002 Aerospace series - Steel FE-WA2602 (X4NiCrTiMoV26-15) - Filler metal for welding - Wire and rod《航空航天系列 FE-WA2602钢 (X4NiCrTiMoV26-15) 焊接用填充金属 焊丝和焊条》.pdf

《BS EN 4335-2002 Aerospace series - Steel FE-WA2602 (X4NiCrTiMoV26-15) - Filler metal for welding - Wire and rod《航空航天系列 FE-WA2602钢 (X4NiCrTiMoV26-15) 焊接用填充金属 焊丝和焊条》.pdf》由会员分享，可在线阅读，更多相关《BS EN 4335-2002 Aerospace series - Steel FE-WA2602 (X4NiCrTiMoV26-15) - Filler metal for welding - Wire and rod《航空航天系列 FE-WA2602钢 (X4NiCrTiMoV26-15) 焊接用填充金属 焊丝和焊条》.pdf（10页珍藏版）》请在麦多课文档分享上搜索。

1、BRITISH STANDARD AEROSPACE SERIES BS EN 4335:2002 Steel FE-WA2602 (X4NiCrTiMoV26-15) Filler metal for welding Wire and rod The European Standard EN 4335:2002 has the status of a British Standard ICS 49.025.10 NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBS EN 4335:2002 This

2、British Standard, having been prepared under the direction of the Engineering Sector Policy and Strategy Committee, was published under the authority of the Standards Policy and Strategy Committee on 8 February 2002 BSI 8 February 2002 ISBN 0 580 38177 3 National foreword This British Standard is th

3、e official English language version of EN 4335:2002. The UK participation in its preparation was entrusted to Technical Committee ACE/15, Wrought and cast steels for aerospace, which has the responsibility to: A list of organizations represented on this committee can be obtained on request to its se

4、cretary. Cross-references The British Standards which implement international or European publications referred to in this document may be found in the BSI Standards Catalogue under the section entitled “International Standards Correspondence Index”, or by using the “Find” facility of the BSI Standa

5、rds Electronic Catalogue. A British Standard does not purport to include all the necessary provisions of a contract. Users of British Standards are responsible for their correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. aid enquirers t

6、o understand the text; present to the responsible European committee any enquiries on the interpretation, or proposals for change, and keep the UK interests informed; monitor related international and European developments and promulgate them in the UK. Summary of pages This document comprises a fro

7、nt cover, an inside front cover, the EN title page, pages 2 to 6, an inside back cover and a back cover. The BSI copyright date displayed in this document indicates when the document was last issued. Amendments issued since publication Amd. No. Date CommentsEUROPEANSTANDARD NORMEEUROPENNE EUROPISCHE

8、NORM EN4335 January2002 ICS49.025.10 Englishversion AerospaceseriesSteelFEWA2602(X4NiCrTiMoV2615) FillermetalforweldingWireandrod SriearospatialeAcierFEWA2602(X4NiCrTiMoV26 15)MtaldapportdesoudageFiletbaguette LuftundRaumfahrtStahlFEWA2602(X4NiCrTiMoV26 15)SchweizusatzDrahtundStbe ThisEuropeanStanda

9、rdwasapprovedbyCENon2May2001. CENmembersareboundtocomplywiththeCEN/CENELECInternalRegulationswhichstipulatetheconditionsforgivingthisEurope an Standardthestatusofanationalstandardwithoutanyalteration.Uptodatelistsandbibliographicalreferencesconcernings uchnational standardsmaybeobtainedonapplication

10、totheManagementCentreortoanyCENmember. ThisEuropeanStandardexistsinthreeofficialversions(English,French,German).Aversioninanyotherlanguagemadebytra nslation undertheresponsibilityofaCENmemberintoitsownlanguageandnotifiedtotheManagementCentrehasthesamestatusasthe official versions. CENmembersarethena

11、tionalstandardsbodiesofAustria,Belgium,CzechRepublic,Denmark,Finland,France,Germany,Greece, Iceland,Ireland,Italy,Luxembourg,Malta,Netherlands,Norway,Portugal,Spain,Sweden,SwitzerlandandUnitedKingdom. EUROPEANCOMMITTEEFORSTANDARDIZATION COMITEUROPENDENORMALISATION EUROPISCHESKOMITEEFRNORMUNG Managem

12、entCentre:ruedeStassart,36B1050Brussels 2002CEN Allrightsofexploitationinanyformandbyanymeansreserved worldwideforCENnationalMembers. Ref.No.EN4335:2002EEN4335:2002(E) 2 Foreword Thisdocument(EN4335:2002)hasbeenpreparedbytheEuropeanAssociationofAerospace Manufacturers(AECMA). Afterenquiriesandvotesc

13、arriedoutinaccordancewiththerulesofthisAssociation,thisStandardhas receivedtheapprovaloftheNationalAssociationsandtheOfficialServicesofthemembercountriesof AECMA,priortoitspresentationtoCEN ThisEuropeanStandardshallbegiventhestatusofanationalstandard,eitherbypublicationofanidentical textorbyendorsem

14、ent,atthelatestbyJuly2002,andconflictingnationalstandardsshallbewithdrawnatthe latestbyJuly2002. AccordingtotheCEN/CENELECInternalRegulations,thenationalstandardsorganizationsofthefollowing countriesareboundtoimplementthisEuropeanStandard:Austria,Belgium,CzechRepublic,Denmark, Finland,France,Germany

15、,Greece,Iceland,Ireland,Italy,Luxembourg,Malta,Netherlands,Norway, Portugal,Spain,Sweden,SwitzerlandandtheUnitedKingdom.EN4335:2002(E) 3 0 Introduction ThisstandardispartoftheseriesofENmetallicmaterialstandardsforaerospaceapplications.Thegeneral organizationofthisseriesisdescribedinEN4258. Thisstand

16、ardhasbeenpreparedinaccordancewithEN45005. 1 Scope Thisstandardspecifiestherequirementsrelatingto: SteelFEWA2602(X4NiCrTiMoV2615) Fillermetalforwelding Wireandrod foraerospaceapplications. 2 Normativereferences ThisEuropeanStandardincorporatesbydatedorundatedreferenceprovisionsfromotherpublications.

17、 Thesenormativereferencesarecitedattheappropriateplacesinthetextandthepublicationsarelisted hereafter.Fordatedreferences,subsequentamendmentstoorrevisionsofanyofthesepublicationsapplyto thisEuropeanStandardonlywhenincorporatedinitbyamendmentorrevision.Forundatedreferencesthe latesteditionofthepublic

18、ationreferredtoapplies. EN2043 AerospaceseriesMetallicmaterialsGeneralrequirementsforsemifinishedproduct qualification(excludingforgingsandcastings) 1) EN3879 AerospaceseriesMetallicmaterialsFillermetalforweldingTechnicalspecification 1) EN4258 AerospaceseriesMetallicmaterialsGeneralorganizationofst

19、andardizationLinks betweentypesofENstandardsandtheiruse EN 45005 AerospaceseriesMetallicmaterialsRulesfordraftingandpresentationofmaterial standardsPart5:Specificrulesforsteels 1) 1) PublishedasAECMAPrestandardatthedateofpublicationofthisstandardEN4335:2002(E) 4 1 Materialdesignation SteelFEWA2602(X

20、4NiCrTiMoV2615) Element C Si Mn P S Cr Mo Ni Al B Pb Ti V Fe min. 13,5 1,0 24,0 0,003 1,7 0,10 2 Chemical composition % max. 0,06 0,50 2,0 0,02 0,015 16,5 1,5 27,0 0,35 0,010 50 a 2,0 0,50 Base 3 Methodofmelting Consumableelectroderemelted 4.1 Form Wireandrod 4.2 Methodofproduction Colddrawn 4.3 Lim

21、itdimension(s) mm 5 Technicalspecification EN3879 Deliverycondition Colddrawnandannealed 6.1 Heattreatment 6.2 Deliveryconditioncode U Usecondition Deliverycondition 7 Heattreatment Characteristics 8.1 Testsample(s) 8.2 Testpiece(s) 8.3 Heattreatment 9 Dimensionsconcerned mm 10 Thicknessofcladdingon

22、 eachface % 11 Directionoftestpiece 12 Temperature C 13 Proofstress R p0,2 MPa 14 Strength R m MPa 15 Elongation A % 16 T Reductionofarea Z % 17 Hardness 18 Shearstrength R c MPa 19 Bending k 20 Impactstrength 21 Temperature C 22 Time h 23 Stress a MPa 24 Elongation a % 25 Rupturestress R MPa 26 C E

23、longationat rupture A% 27 Notes(seeline98) aEN4335:2002(E) 5 44 Externaldefects SeeEN3879 57 Residualstress SeeEN3879 61 Internaldefects SeeEN3879 82 Batchuniformity (Materialverification) SeeEN3879 95 Markinginspection SeeEN3879 96 Dimensionalinspection SeeEN3879 98 Notes a p.p.m. 99 Typicaluse EN4

24、335:2002(E) 6 100 Productqualification SeeEN2043 Qualificationprogrammetobeagreedbetweenmanufacturerandpurchaser.blankBS EN 4335:2002 BSI 389 Chiswick High Road London W4 4AL BSI British Standards Institution BSI is the independent national body responsible for preparing British Standards. It presen

25、ts the UK view on standards in Europe and at the international level. It is incorporated by Royal Charter. Revisions British Standards are updated by amendment or revision. Users of British Standards should make sure that they possess the latest amendments or editions. It is the constant aim of BSI

26、to improve the quality of our products and services. We would be grateful if anyone finding an inaccuracy or ambiguity while using this British Standard would inform the Secretary of the technical committee responsible, the identity of which can be found on the inside front cover. Tel: +44 (0)20 899

27、6 9000. Fax: +44 (0)20 8996 7400. BSI offers members an individual updating service called PLUS which ensures that subscribers automatically receive the latest editions of standards. Buying standards Orders for all BSI, international and foreign standards publications should be addressed to Customer

28、 Services. Tel: +44 (0)20 8996 9001. Fax: +44 (0)20 8996 7001. Email: ordersbsi-. Standards are also available from the BSI website at http:/www.bsi-. In response to orders for international standards, it is BSI policy to supply the BSI implementation of those that have been published as British Sta

29、ndards, unless otherwise requested. Information on standards BSI provides a wide range of information on national, European and international standards through its Library and its Technical Help to Exporters Service. Various BSI electronic information services are also available which give details o

30、n all its products and services. Contact the Information Centre. Tel: +44 (0)20 8996 7111. Fax: +44 (0)20 8996 7048. Email: infobsi-. Subscribing members of BSI are kept up to date with standards developments and receive substantial discounts on the purchase price of standards. For details of these

31、and other benefits contact Membership Administration. Tel: +44 (0)20 8996 7002. Fax: +44 (0)20 8996 7001. Email: membershipbsi-. Information regarding online access to British Standards via British Standards Online can be found at http:/www.bsi- Further information about BSI is available on the BSI

32、website at http:/www.bsi-. Copyright Copyright subsists in all BSI publications. BSI also holds the copyright, in the UK, of the publications of the international standardization bodies. Except as permitted under the Copyright, Designs and Patents Act 1988 no extract may be reproduced, stored in a r

33、etrieval system or transmitted in any form or by any means electronic, photocopying, recording or otherwise without prior written permission from BSI. This does not preclude the free use, in the course of implementing the standard, of necessary details such as symbols, and size, type or grade designations. If these details are to be used for any other purpose than implementation then the prior written permission of BSI must be obtained. Details and advice can be obtained from the Copyright & Licensing Manager. Tel: +44 (0)20 8996 7070. Fax: +44 (0)20 8996 7553. Email: copyrightbsi-.