BS EN 419-1-2009 Non-domestic gas-fired overhead luminous radiant heaters - Safety《非家庭用燃气高架发光辐射加热器 安全性》.pdf

《BS EN 419-1-2009 Non-domestic gas-fired overhead luminous radiant heaters - Safety《非家庭用燃气高架发光辐射加热器 安全性》.pdf》由会员分享，可在线阅读，更多相关《BS EN 419-1-2009 Non-domestic gas-fired overhead luminous radiant heaters - Safety《非家庭用燃气高架发光辐射加热器 安全性》.pdf（84页珍藏版）》请在麦多课文档分享上搜索。

1、BS EN 419-1:2009ICS 97.100.20NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBRITISH STANDARDNon-domestic gas-firedoverhead luminousradiant heatersPart 1: SafetyThis British Standardwas published under theauthority of the StandardsPolicy and StrategyCommittee on 31 March2009 BS

2、I 2009ISBN 978 0 580 55855 9Amendments/corrigenda issued since publicationDate CommentsBS EN 419-1:2009National forewordThis British Standard is the UK implementation of EN 419-1:2009. Itsupersedes BS EN 419-1:2000 which is withdrawn.The UK participation in its preparation was entrusted to Technical

3、Committee GSE/20, Non-domestic space heaters (gas).A list of organizations represented on this committee can be obtained onrequest to its secretary.This publication does not purport to include all the necessary provisionsof a contract. Users are responsible for its correct application.Compliance wit

4、h a British Standard cannot confer immunityfrom legal obligations.BS EN 419-1:2009EUROPEAN STANDARDNORME EUROPENNEEUROPISCHE NORMEN 419-1January 2009ICS 97.100.20 Supersedes EN 419-1:1999 English VersionNon-domestic gas-fired overhead luminous radiant heaters -Part 1: SafetyAppareils surlevs de chau

5、ffage rayonnement lumineuxau gaz, usage non domestique - Partie 1 : ScuritGasgerte-Heizstrahler - Hellstrahler mit einem Brennerohne Geblse fr gewerbliche und industrielle Anwendung -Teil 1: SicherheitThis European Standard was approved by CEN on 19 December 2008.CEN members are bound to comply with

6、 the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the CEN Management Centr

7、e or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as theofficial ve

8、rsions.CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,Romania, Slovakia, Slovenia, Sp

9、ain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMIT EUROPEN DE NORMALISATIONEUROPISCHES KOMITEE FR NORMUNGManagement Centre: rue de Stassart, 36 B-1050 Brussels 2009 CEN All rights of exploitation in any form and by any means reservedworldwide for CEN national Mem

10、bers.Ref. No. EN 419-1:2009: EBS EN 419-1:2009EN 419-1:2009 (E) 2 Contents Page Foreword . 41 Scope 52 Normative references . 53 Terms and definitions . 63.1 Appliance and its constituent parts 63.2 Adjusting, control and safety devices 83.3 Operation of the appliance . 93.3.1 Heat input . 93.4 Gase

11、s 123.5 Conditions of operation and measurement 133.6 Country of destination 144 Classification of appliances . 144.1 Classification of gases according to the nature of the gases used (categories) . 144.2 Classification according to the gases capable of being used . 144.3 Classification according to

12、 the mode of evacuation of the combustion products 165 Constructional requirements . 165.1 General . 165.2 Requirements for adjusting, control and safety devices 205.3 Ignition devices . 245.4 Main burner 245.5 Pressure test points 245.6 Injectors . 256 Operational requirements 256.1 Soundness of th

13、e gas circuit . 256.2 Heat inputs . 256.3 Limiting temperatures 266.4 Ignition, cross-lighting and flame stability . 266.5 Flame supervision devices 276.6 Pressure regulator 276.7 Combustion . 276.8 Prolonged performance 276.9 Measurement of oxides of Nitrogen, NOx. 287 Test methods . 287.1 General

14、. 287.2 Safety of operation 357.3 Other pollutants 458 Marking and instructions . 488.1 Marking of the appliance and the packaging . 488.2 Instructions 528.3 Presentation 55Annex A (informative) National situations . 56A.1 General . 56A.2 Categories listed in the body of the standard and marketed in

15、 different countries 56A.3 Appliance supply pressures corresponding to the categories given in A.2 58A.4 Special categories marketed nationally or locally . 60A.5 Test gases corresponding to the special categories given in A.4 . 64A.6 Gas connections in the various countries . 66BS EN 419-1:2009EN 4

16、19-1:2009 (E) 3 Annex B (informative) Equivalence rules . 67B.1 Conversion to categories within a restricted Wobbe index range 67B.2 Conversion to categories within an identical Wobbe index range 67B.3 Conversion to categories within a wider Wobbe index range 68Annex C (informative) Identification o

17、f the types of gas in use in the various countries . 69Annex D (normative) Special national conditions 70D.1 General . 70D.2 Belgium 70D.3 Italy . 70Annex E (informative) Example of calculation of the weighting factors for an appliance with several rates 71E.1 Appliance rates . 71E.2 Weighting of Qp

18、i,% = 20 71E.3 Weighting of Qpi,%= 40 71E.4 Weighting of Qpi,%= 60 71E.5 Weighting of Qpi,%= 70 72E.6 Total weighting 72Annex F (informative) Calculation of conversions of NOx. 73F.1 NOxemission conversion factors 73F.2 NOxconversion calculation . 74Annex G (informative) National situations of count

19、ries whose national bodies are CEN associate members . 76Annex ZA (informative) Clauses of this European Standard addressing essential requirements or other provisions of EU Directives . 77Bibliography . 80BS EN 419-1:2009EN 419-1:2009 (E) 4 Foreword This document (EN 419-1:2009) has been prepared b

20、y Technical Committee CEN/TC 180 “Domestic and non-domestic gas fired air heaters and non-domestic gas fired overhead radiant heaters”, the secretariat of which is held by BSI. This European Standard shall be given the status of a national standard, either by publication of an identical text or by e

21、ndorsement, at the latest by July 2009, and conflicting national standards shall be withdrawn at the latest by July 2009. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identif

22、ying any or all such patent rights. This document supersedes EN 419-1:1999. In particular, it should be noted that this standard no longer includes requirements for Type B1appliances. The test gases, test pressures and appliance categories given in this European Standard are in accordance with those

23、 specified in EN 437:2003. This document has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association, and supports essential requirements of EC Directive(s). For relationship with EC Directive(s), see informative Annex ZA which is an integral par

24、t of this document. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Icela

25、nd, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. BS EN 419-1:2009EN 419-1:2009 (E) 5 1 Scope This European Standard specifies the requirements and test methods for the cons

26、truction, safety, classification and marking of non-domestic gas-fired overhead luminous radiant heaters for environmental comfort, incorporating an atmospheric burner system referred to in the body of the text as “appliances”. This European Standard is applicable to Type A1appliances only (see 4.3)

27、. This European Standard is not applicable to: a) appliances designed for use in domestic dwellings; b) outdoor appliances; c) appliances of heat input in excess of 120 kW (based on the net calorific value of the appropriate reference gas); d) appliances having fully pre-mixed gas and air burners in

28、 which: 1) either the gas and all the combustion air are brought together just before the level of the combustion zone; or 2) the pre-mixing of the gas and all combustion air is carried out in a part of the burner upstream of the combustion zone; e) appliances in which the supply of combustion air a

29、nd/or the removal of the products of combustion is achieved by integral mechanical means. This standard is applicable to appliances which are intended to be type tested. Requirements for appliances which are not intended to be type tested would need to be subject to further consideration. Requiremen

30、ts concerning the rational use of energy have not been included in this European Standard. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the editions cited applies. For undated referenes, the latest editio

31、n of the referenced document (including any amendments) applies. EN 88-1:2007, Pressure regulators and associated safety devices for gas appliances - Part 1: Pressure regulators for inlet pressures up to and including 500 mbar EN 125:1991, Flame supervision devices for gas burning appliances Thermo-

32、electric flame supervision devices EN 126:2004, Multifunctional controls for gas burning appliances EN 161:2007, Automatic shut-off valves for gas burners and gas appliances EN 257:1992, Mechanical thermostats for gas-burning appliances EN 298:2003, Automatic gas burner control systems gas burners a

33、nd gas burning appliances with or without fans BS EN 419-1:2009EN 419-1:2009 (E) 6 EN 437:2003, Test gases - Test pressures - Appliance categories EN 1057:2006, Copper and copper alloys - Seamless, round copper tubes for water and gas in sanitary and heating applications EN 10226-1:2004, Pipe thread

34、s where pressure-tight joints are made on the threads Part 1: Taper external threads and parallel internal threads - Dimensions, tolerances and designation EN 10226-2:2005, Pipe threads where pressure tight joints are made on the threads Part 2: Taper external threads and taper internal threads. Dim

35、ensions, tolerances and designation EN 13410:2001, Gas-fired overhead radiant heaters - Ventilation requirements for non-domestic premises EN 60335-1:2002, Household and similar electrical appliances - Safety - Part 1: General requirements EN 60335-2-102:2006, Household and similar electrical applia

36、nces - Safety - Part 2-102: Particular requirements for gas, oil and solid-fuel burning appliances having electrical connections EN 60529:1991, Degrees of protection provided by enclosures (IP code) EN ISO 228-1:2003, Pipe threads where pressure-tight joints are not made on the threads - Part 1: Dim

37、ensions, tolerances and designation (ISO 228-1:2000) EN ISO 3166-1:2006, Codes for the representation of names of countries and their subdivisions Part 1: Country codes (ISO 3166-1:2006) EN ISO 6976:2005, Natural gas - Calculation of the calorific value, density, relative density and Wobbe index fro

38、m composition (ISO 6976:1995 including Corrigendum 1:1997, Corrigendum 2:1997 and Corrigendum 3:1999) ISO 7005-1:1992, Metallic flanges - Part 1: Steel flanges ISO 7005-2:1988, Metallic flanges - Part 2: Cast iron flanges ISO 7005-3:1988, Metallic flanges - Part 3: Copper flanges and composite flang

39、es CR 1404:1994, Determination of emissions from appliances burning gaseous fuels during type testing 3 Terms and definitions For the purposes of this standard the following terms and definitions apply. 3.1 Appliance and its constituent parts 3.1.1 overhead luminous radiant heater gas-fired applianc

40、e intended for installation at a height above head level, which is designed to heat the space beneath by radiation and in which the heat is produced by means of burning the fuel at or near the outer surface of a material such as a ceramic plaque or gauze, or by means of an atmospheric burner heating

41、 a gauze or similar material 3.1.2 atmospheric burner aerated burner in which the air for combustion is entrained at atmospheric pressure BS EN 419-1:2009EN 419-1:2009 (E) 7 3.1.3 inlet connection the part of the appliance intended to be connected to the gas supply 3.1.4 mechanical joint means of en

42、suring the soundness of an assembly of several (generally metallic) parts without the use of liquids, pastes, tapes, etc. NOTE For example the following: a) metal to metal joints; b) conical joints; c) toroidal sealing rings (“O” rings); d) flat joints. 3.1.5 gas circuit part of the appliance that c

43、onveys or contains the gas between the appliance gas inlet connection and the burner(s) 3.1.6 restrictor device with an orifice, which is placed in the gas circuit so as to create a pressure drop and thus reduce the gas pressure at the burner to a predetermined value for a given supply pressure and

44、rate 3.1.7 gas rate adjuster component allowing an authorized person to set the gas rate of the burner to a predetermined value according to the supply conditions NOTE 1 Adjustment can be progressive (screw adjuster) or in discrete steps (by changing restrictors). NOTE 2 The adjusting screw of an ad

45、justable regulator is regarded as a gas rate adjuster. NOTE 3 The action of adjusting this device is called “adjusting the gas rate”. NOTE 4 A factory sealed gas rate adjuster is considered to be non-existent. 3.1.8 setting an adjuster immobilizing a gas rate adjuster by such means as e.g. a screw,

46、after the gas rate has been adjusted by the manufacturer or installer 3.1.9 sealing an adjuster term applied to any arrangement in respect of the adjuster such that any attempt to change the adjustment breaks the sealing device or sealing material and makes this interference apparent NOTE 1 A factor

47、y sealed adjuster is considered to be non-existent. NOTE 2 A regulator is considered to be non-existent if it has been factory sealed in a position such that it is not operational in the range of supply pressures corresponding to the appliance category. BS EN 419-1:2009EN 419-1:2009 (E) 8 3.1.10 put

48、ting an adjuster or a control out of service putting an adjuster or a control (of temperature, pressure, etc.) out of action and sealing it in this position. NOTE The appliance functions as if the adjuster or control had been removed. 3.1.11 injector component that admits the gas into a burner 3.1.1

49、2 main burner burner that is intended to ensure the thermal function of the appliance and is generally called “the burner” 3.1.13 ignition burner burner whose flame is intended to ignite another burner 3.1.14 ignition device means (e.g. flame, electrical ignition device or other device) used to ignite the gas at