BS EN 4165-024-2017 Aerospace series Connectors electrical rectangular modular Operating temperature 175 C continuous Single module plug Product standard《航空航天系列 矩形模块电气连接器 连续工作温度175.pdf

《BS EN 4165-024-2017 Aerospace series Connectors electrical rectangular modular Operating temperature 175 C continuous Single module plug Product standard《航空航天系列 矩形模块电气连接器 连续工作温度175.pdf》由会员分享，可在线阅读，更多相关《BS EN 4165-024-2017 Aerospace series Connectors electrical rectangular modular Operating temperature 175 C continuous Single module plug Product standard《航空航天系列 矩形模块电气连接器 连续工作温度175.pdf（18页珍藏版）》请在麦多课文档分享上搜索。

1、BS EN 4165-024:2017Aerospace series Connectors, electrical,rectangular, modular Operating temperature 175 CcontinuousPart 024: Single module plug ProductstandardBSI Standards PublicationWB11885_BSI_StandardCovs_2013_AW.indd 1 15/05/2013 15:06BS EN 4165-024:2017 BRITISH STANDARDNational forewordThis

2、British Standard is the UK implementation of EN 4165-024:2017.It supersedes BS EN 4165-024:2011 which is withdrawn.The UK participation in its preparation was entrusted to TechnicalCommittee ACE/6, Aerospace avionic electrical and fibre optictechnology.A list of organizations represented on this com

3、mittee can beobtained on request to its secretary.This publication does not purport to include all the necessaryprovisions of a contract. Users are responsible for its correctapplication. The British Standards Institution 2017. Published by BSI Standards Limited 2017ISBN 978 0 580 95148 0ICS 49.060C

4、ompliance with a British Standard cannot confer immunity fromlegal obligations.This British Standard was published under the authority of theStandards Policy and Strategy Committee on 31 March 2017.Amendments/corrigenda issued since publicationDate Text affectedBS EN 4165-024:2017EUROPEAN STANDARD N

5、ORME EUROPENNE EUROPISCHE NORM EN 4165-024 March 2017 ICS 49.060 Supersedes EN 4165-024:2011English Version Aerospace series - Connectors, electrical, rectangular, modular - Operating temperature 175 C continuous - Part 024: Single module plug - Product standard Srie Arospatiale - Connecteurs lectri

6、ques rectangulaires, modulaires - Temprature dutilisation 175 C continu - Partie 024: Fiche mono-module - Norme de produit Luft- und Raumfahrt - Elektrischer Rechtecksteckverbinder in modularer Bauweise - Betriebstemperatur 175 C konstant - Teil 024: Freier Steckverbinder fr Einzelmodul - Produktnor

7、m This European Standard was approved by CEN on 26 October 2016. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical r

8、eferences concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a

9、 CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Maced

10、onia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISAT

11、ION EUROPISCHES KOMITEE FR NORMUNG CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2017 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 4165-024:2017 EBS EN 4165-024:2017EN 4165-024:2017 (E) 2 Contents Page Europea

12、n foreword . 3 1 Scope 4 2 Normative references 4 3 Terms and definitions . 4 4 Required characteristics 4 5 Designation. 12 6 Marking 13 7 Technical specification . 13 BS EN 4165-024:2017EN 4165-024:2017 (E) 3 European foreword This document (EN 4165-024:2017) has been prepared by the Aerospace and

13、 Defence Industries Association of Europe - Standardization (ASD-STAN). After enquiries and votes carried out in accordance with the rules of this Association, this European Standard has received the approval of the National Associations and the Official Services of the member countries of ASD, prio

14、r to its presentation to CEN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by September 2017, and conflicting national standards shall be withdrawn at the latest by September 2017. Attention is dr

15、awn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. This document supersedes EN 4165-024:2011. According to the CEN-CENELEC Internal Regulations, the nat

16、ional standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Li

17、thuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. BS EN 4165-024:2017EN 4165-024:2017 (E) 4 1 Scope This European Standard defines the single module plug used in the family of rectangular

18、 electrical connectors. The receptacle corresponding to this plug is defined in EN 4165-025. Accessories and protective cover corresponding to those plugs are defined in EN 4165-026. The cavity of this connector is uncoded, so it can accept polarized modules N, A, B, C and D as defined in EN 4165-00

19、2. 2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any am

20、endments) applies. EN 2424, Aerospace series Marking of aerospace products EN 4165-001, Aerospace series Connectors, electrical, rectangular, modular Operating temperature 175 C continuous Part 001: Technical specification EN 4165-002, Aerospace series Connectors, electrical, rectangular, modular Op

21、erating temperature 175 C continuous Part 002: Specification of performance and contact arrangements EN 4165-025, Aerospace series Connectors, electrical, rectangular, modular Operating temperature 175 C continuous Part 025: Module receptacle Product standard EN 4165-026, Aerospace series Connectors

22、, electrical, rectangular, modular Operating temperature 175 C continuous Part 026: Accessories for single module connector Product standard 3 Terms and definitions For the purposes of this document, the terms and definitions given in EN 4165-001 apply. 4 Required characteristics 4.1 Single module p

23、lug design Dimensions, alternative design and positions of keying polarization see EN 4165-001. Colour of locking system according polarization, see Clause 5. See Figures 1 to 8. Dimensions are in millimetres. Mass = 10,6 g max. BS EN 4165-024:2017EN 4165-024:2017 (E) 5 Figure 1 With alternatives de

24、signs BS EN 4165-024:2017EN 4165-024:2017 (E) 6 Key 1 Locking side down A = 9,1 min. Figure 2 With alternatives designs BS EN 4165-024:2017EN 4165-024:2017 (E) 7 Figure 3 With alternatives designs BS EN 4165-024:2017EN 4165-024:2017 (E) 8 Key 1 Module keying 2 Index for rear accessory orientation (o

25、pposite side from keying module) Figure 4 With alternatives designs BS EN 4165-024:2017EN 4165-024:2017 (E) 9 Figure 5 Detail of bayonet location with alternatives designs Figure 6 With alternatives designs BS EN 4165-024:2017EN 4165-024:2017 (E) 10 Key 1 Cavity Figure 7 With alternatives designs BS

26、 EN 4165-024:2017EN 4165-024:2017 (E) 11 Figure 8 With alternatives designs BS EN 4165-024:2017EN 4165-024:2017 (E) 12 4.2 Class See Table 1. Table 1 Class Description M Receptacle with housing (shell) nickel plated, composite material, conducting finish, 500 hours resistance to salt mist, maximum o

27、perating temperature 175 C continuous. 5 Designation EXAMPLE Description block ELECTRICAL CONNECTOR PLUG Identity block EN4165 M 6 1 A N Number of the basic standard Classes type, see 4.2 M = composite nickel plated Type 6: plug (see EN 4165-002) Number of module Type 1 = Mono module Type A = Module

28、 type series 2 (see EN 4165-002) Polarization code: Code Colour N Black A Red B Blue C Green D Yellow E Pink F Clear green G Clear grey H Light olive Polarization N to H are mechanically and colour coded (9 polarizations). BS EN 4165-024:2017EN 4165-024:2017 (E) 13 6 Marking Unless there are other s

29、pecific contractual requirements, the marking shall be in accordance with EN 2424, category P. 7 Technical specification See EN 4165-001. This page deliberately left blankThis page deliberately left blankBSI is the national body responsible for preparing British Standards and other standards-related

30、 publications, information and services.BSI is incorporated by Royal Charter. British Standards and other standardization products are published by BSI Standards Limited.British Standards Institution (BSI)About usWe bring together business, industry, government, consumers, innovators and others to s

31、hape their combined experience and expertise into standards -based solutions.The knowledge embodied in our standards has been carefully assembled in a dependable format and refined through our open consultation process. Organizations of all sizes and across all sectors choose standards to help them

32、achieve their goals.Information on standardsWe can provide you with the knowledge that your organization needs to succeed. Find out more about British Standards by visiting our website at or contacting our Customer Services team or Knowledge Centre.Buying standardsYou can buy and download PDF versi

33、ons of BSI publications, including British and adopted European and international standards, through our website at where hard copies can also be purchased. If you need international and foreign standards from other Standards Development Organizations, hard copies can be ordered from our Customer S

34、ervices team.Copyright in BSI publicationsAll the content in BSI publications, including British Standards, is the property of and copyrighted by BSI or some person or entity that owns copyright in the information used (such as the international standardization bodies) and has formally licensed such

35、 information to BSI for commercial publication and use.Save for the provisions below, you may not transfer, share or disseminate any portion of the standard to any other person. You may not adapt, distribute, commercially exploit, or publicly display the standard or any portion thereof in any manner

36、 whatsoever without BSIs prior written consent.Storing and using standardsStandards purchased in soft copy format: A British Standard purchased in soft copy format is licensed to a sole named user for personal or internal company use only. The standard may be stored on more than 1 device provided th

37、at it is accessible by the sole named user only and that only 1 copy is accessed at any one time. A single paper copy may be printed for personal or internal company use only.Standards purchased in hard copy format: A British Standard purchased in hard copy format is for personal or internal company

38、 use only. It may not be further reproduced in any format to create an additional copy. This includes scanning of the document.If you need more than 1 copy of the document, or if you wish to share the document on an internal network, you can save money by choosing a subscription product (see Subscri

39、ptions).Reproducing extractsFor permission to reproduce content from BSI publications contact the BSI Copyright & Licensing team.SubscriptionsOur range of subscription services are designed to make using standards easier for you. For further information on our subscription products go to British St

40、andards Online (BSOL) youll have instant access to over 55,000 British and adopted European and international standards from your desktop. Its available 24/7 and is refreshed daily so youll always be up to date. You can keep in touch with standards developments and receive substantial discounts on t

41、he purchase price of standards, both in single copy and subscription format, by becoming a BSI Subscribing Member. PLUS is an updating service exclusive to BSI Subscribing Members. You will automatically receive the latest hard copy of your standards when theyre revised or replaced. To find out more

42、 about becoming a BSI Subscribing Member and the benefits of membership, please visit a Multi-User Network Licence (MUNL) you are able to host standards publications on your intranet. Licences can cover as few or as many users as you wish. With updates supplied as soon as theyre available, you can

43、be sure your documentation is current. For further information, email .RevisionsOur British Standards and other publications are updated by amendment or revision. We continually improve the quality of our products and services to benefit your business. If you find an inaccuracy or ambiguity within a

44、 British Standard or other BSI publication please inform the Knowledge Centre.Useful ContactsCustomer ServicesTel: +44 345 086 9001Email (orders): Email (enquiries): SubscriptionsTel: +44 345 086 9001Email: Knowledge CentreTel: +44 20 8996 7004Email: Copyright & LicensingTel: +44 20 8996 7070Email: NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBSI Group Headquarters389 Chiswick High Road London W4 4AL UKBSI Back Cover.indd 1 27/01/2016 14:20