BS EN 3660-017-2009 Aerospace series - Cable outlet accessories for circular and rectangular electrical and optical connectors - Part 017 Cable outlet style A straight nunsealed wi.pdf

《BS EN 3660-017-2009 Aerospace series - Cable outlet accessories for circular and rectangular electrical and optical connectors - Part 017 Cable outlet style A straight nunsealed wi.pdf》由会员分享，可在线阅读，更多相关《BS EN 3660-017-2009 Aerospace series - Cable outlet accessories for circular and rectangular electrical and optical connectors - Part 017 Cable outlet style A straight nunsealed wi.pdf（14页珍藏版）》请在麦多课文档分享上搜索。

1、BS EN3660-017:2009ICS 49.060NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBRITISH STANDARDAerospace series Cable outletaccessories for circularand rectangularelectrical and opticalconnectorsPart 017: Cable outlet, style A, straight,unsealed, with cable tie strain relief Produ

2、ct standardThis British Standardwas published under theauthority of the StandardsPolicy and StrategyCommittee on 30 April2009 BSI 2009ISBN 978 0 580 63189 4Amendments/corrigenda issued since publicationDate CommentsBS EN 3660-017:2009National forewordThis British Standard is the UK implementation of

3、 EN 3660-017:2009.The UK participation in its preparation was entrusted to TechnicalCommittee ACE/6, Aerospace avionic electrical and fibre optictechnology.A list of organizations represented on this committee can be obtained onrequest to its secretary.This publication does not purport to include al

4、l the necessary provisionsof a contract. Users are responsible for its correct application.Compliance with a British Standard cannot confer immunityfrom legal obligations.BS EN 3660-017:2009EUROPEAN STANDARDNORME EUROPENNEEUROPISCHE NORMEN 3660-017March 2009ICS 49.060English VersionAerospace series

5、- Cable outlet accessories for circular andrectangular electrical and optical connectors - Part 017: Cableoutlet, style A, straight, unsealed, with cable tie strain relief -Product standardSrie arospatiale - Accessoires arrire pour connecteurscirculaires et rectangulaires lectriques et optiques - Pa

6、rtie017: Raccord droit non tanche, type A, avec tenue ducble par frettage - Norme de produitLuft- und Raumfahrt - Endgehuse fr elektrische undoptische Rund- und Rechtecksteckverbinder - Teil 017:Endgehuse, Bauform A, gerade, nicht abgedichtet, mitArm fr Kabelbinder - ProduktnormThis European Standar

7、d was approved by CEN on 30 August 2008.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such

8、nationalstandards may be obtained on application to the CEN Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and

9、 notified to the CEN Management Centre has the same status as theofficial versions.CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg,

10、Malta, Netherlands, Norway, Poland, Portugal,Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMIT EUROPEN DE NORMALISATIONEUROPISCHES KOMITEE FR NORMUNGManagement Centre: Avenue Marnix 17, B-1000 Brussels 2009 CEN All rights of exploi

11、tation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 3660-017:2009: EBS EN 3660-017:2009EN 3660-017:2009 (E) 2 Contents Page Foreword 3 1 Scope 4 2 Normative references 4 3 Terms and definitions .4 4 Characteristics .4 5 Designation 9 6 Marking 10 7 Technical sp

12、ecification 10 BS EN 3660-017:2009EN 3660-017:2009 (E) 3 Foreword This document (EN 3660-017:2009) has been prepared by the Aerospace and Defence Industries Association of Europe - Standardization (ASD-STAN). After enquiries and votes carried out in accordance with the rules of this Association, thi

13、s Standard has received the approval of the National Associations and the Official Services of the member countries of ASD, prior to its presentation to CEN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the

14、latest by September 2009, and conflicting national standards shall be withdrawn at the latest by September 2009. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any

15、or all such patent rights. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary

16、, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. BS EN 3660-017:2009EN 3660-017:2009 (E) 4 1 Scope This product standard defines a range of cable outlets, style A, s

17、traight, unsealed, with cable tie strain relief. Associated electrical connector(s) : see EN 3660-002. Temperature range, Class A : 65 C to 200 C Class N : 65 C to 200 C Class W : 65 C to 175 C 2 Normative references The following referenced documents are indispensable for the application of this do

18、cument. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 2424, Aerospace series Marking of aerospace products. EN 2591-100*, Aerospace series Elements of electrical and optical connectio

19、n Test methods Part 100: General. EN 3660-001, Aerospace series Cable outlet accessories for circular and rectangular electrical and optical connectors Part 001: Technical specification. EN 3660-002, Aerospace series Cable outlet accessories for circular and rectangular electrical and optical connec

20、tors Part 002: Index of product standards. EN 3660-036, Aerospace series Cable outlet accessories for circular and rectangular electrical and optical connectors Part 036: Spacer spad Product standard. 1)AS85049A, Connector accessories, electrical general specification for.2)3 Terms and definitions F

21、or the purposes of this document, the terms and definitions given in EN 3660-001 apply. 4 Characteristics 4.1 Dimensions and masses For dimensions and masses, see Figure 1, Figure 2c) and Table 1. Dimensions and tolerances are in millimetres. *All its parts quoted in this standard. 1) In preparation

22、 at the date of publication of this standard. 2) Published by: Department of Defense (DOD), the Pentagon, Washington, DC 20301, USA BS EN 3660-017:2009EN 3660-017:2009 (E) 5 Key 1 Cable tie or lacing cord Figure 1 Detail A: see Figures 2a) to 2e). Figure 2a) Without lug and spacer pad Figure 2b) Wit

23、hout lug and with spacer pad Figure 2c) With lug and without spacer pad Figure 2d) With lug and spacer pad Figure 2e) Spacer pad see EN 3660-036 Table 1 Shell size A B Ca D E F G Number of teeth Without With Thread Without With Without With Radius self-locking self-locking lug Masses max. ClassesA,

24、N and W max. 0,38 max. max. min. g 09 M12x1-6H 19,60 24,80 6,29 27,10 29,10 12,50 7,59 1,90 12 5,5 6,5 11 M15x1-6H 20,80 26,90 6,29 27,10 29,10 12,50 10,85 2,50 16 6,0 7,5 13 M18x1-6H 23,90 29,70 6,29 27,10 29,10 12,50 13,74 3,40 20 7,5 9,0 15 M22x1-6H 27,20 32,70 6,29 30,20 32,20 12,50 16,92 4,20 2

25、4 11,0 13,0 17 M25x1-6H 30,70 36,10 6,29 31,10 33,10 12,50 20,09 5,00 28 12,5 14,5 19 M28x1-6H 34,50 39,10 6,29 31,10 33,10 12,50 22,18 5,50 32 13,5 16,0 21 M31x1-6H 37,60 42,40 6,29 31,10 33,10 12,50 25,96 6,20 36 15,0 18,5 23 M34x1-6H 40,60 51,10 6,29 31,10 33,10 12,50 29,13 7,20 40 17,5 20,5 25 M

26、37x1-6H 43,20 53,80 6,29 31,10 33,10 12,50 32,31 7,90 44 20,5 25,0 a“C” dimensions is taken when the coupling nut is pulled in forward position. A C D B E G F A5,8 Ref.16,6 8,4 3,6 D 3,3 BS EN 3660-017:2009EN 3660-017:2009 (E) 6 4.2 Interface dimensions 4.2.1 Associated connectors See EN 3660-002. 4

27、.2.2 Standard AS85049 interface See Figure 3 and Table 2. All dimensions in millimetres. Figure 3 Table 2 Shell size A B C D N Number of teeth 0 0,15 min. min. min. mm mm mm mm 09 10,57 7,50 6,70 2,90 12 11 13,56 10,80 9,90 2,90 16 13 16,58 13,80 12,80 2,90 20 15 20,57 16,90 16,00 2,90 24 17 23,57 2

28、0,10 19,20 2,90 28 19 25,57 22,80 21,40 2,90 32 21 29,97 26,00 24,60 2,90 36 23 32,56 29,10 27,70 2,90 40 25 35,56 32,30 30,90 1,70 44 D A B CR 0,25 0,13 R 0,50 0,13 (100 2)0 0,2 0,79BS EN 3660-017:2009EN 3660-017:2009 (E) 7 4.3 Material and finish Cable outlet: Class A : Aluminium/black anodised Cl

29、ass N : Aluminium/electroless nickel plated Class W : Aluminium/olive drab cadmium plated Spacer pad: See EN 3660-036. 4.4 Assembly torque These torque values are intended for installation use only. See Table 3. Table 3 Shell size Torque Nm 0,5 09 7,8011 10,60 13 15,2015 16,30 17 16,3019 16,30 21 19

30、,1023 19,10 25 19,104.5 Tests according to EN 2591-100 Test details to be in accordance with Table 4, EN 3660-001 and EN 2591-100. Qualification to be in accordance with EN 3660-001. BS EN 3660-017:2009EN 3660-017:2009 (E) 8 Table 4 EN 2591- Designation of the test Not applicable Applicable see EN 3

31、660-001 Details 101 Visual examination X 102 Examination of dimensions and mass X See 4.1. 205 Housing (shell) electrical continuity X Only class N and W and only if with grounding lug option: 5 m 212 Surface transfer impedance (from 100 MHz to 1 GHz) aX 301 Endurance at temperature X According to c

32、lass Only self-locking version and specify. 305 Rapid change of temperature X 306 Mould growth X See EN 3660-001. 307 Salt mist X Cable outlet not fitted to a connector and suspended with non metallic cord. Duration: Classes A and N 48 h Class W 500 h 308 Sand and dust X 314 Immersion at low air pre

33、ssure X 315 Fluid resistance X Only self-locking versions and with spacer pad. 316 Ozone resistance X With spacer pad only 317 Flammability X With spacer pad only 318 Fire-resistance X 402 Shock X Method A. Severity: 100 g 403 Sinusoidal and random vibration X Method B. Level J. 406 Mechanical endur

34、ance X 10 cycles 408 Mating and unmating forces X continued BS EN 3660-017:2009EN 3660-017:2009 (E) 9 Table 4 (concluded) EN 2591- Designation of the test Not applicable Applicable see EN 3660-001 Details 420 Mechanical strength of rear accessories X Shell size Torque N 09 11 13 15 17 19 21 23 25 10

35、8 108 108 217 217 217 326 326 435 422 Locking wire hole strength X 513 Magnetic permeability X Not fitted to a connector. Max values: Classes A, N and W 2,0 a1 GHz to 10 GHz under consideration. 5 Designation EXAMPLE 1 Description blockCABLE OUTLET Identity blockEN3660-017XXXXX Number of this standa

36、rd Material/Finish class (See 4.3) Coupling nut 1 without self-locking device 2 with self-locking device Strain relief type A without spacer pad and ground lug B with spacer pad and ground lug C with spacer pad and without ground lug D without spacer pad and with ground lug Shell size EXAMPLE 2 EN36

37、60-017A1A09 Style A, cable outlet, aluminium, black anodised plating, without self-locking, without spacer pad and ground lug, shell size 09. NOTE 1 No gaps are required between sections in the part number when printed. NOTE 2 If necessary, the code I9005 may be placed between the description block

38、and the identity block. BS EN 3660-017:2009EN 3660-017:2009 (E) 10 6 Marking According to EN 2424, category P. 7 Technical specification Refer to EN 3660-001. BS EN 3660-017:2009This page has been intentionally left blank BS EN3660-017:2009BSI GroupHeadquarters 389Chiswick High Road,London, W4 4AL,

39、UKTel +44 (0)20 8996 9001Fax +44 (0)20 8996 - British Standards InstitutionBSI is the independent national body responsible for preparing BritishStandards. It presents the UK view on standards in Europe and at theinternational level. It is incorporated by Royal Charter.RevisionsBritish Standards ar

40、e updated by amendment or revision. Users of BritishStandards should make sure that they possess the latest amendments oreditions.It is the constant aim of BSI to improve the quality of our products and services.We would be grateful if anyone finding an inaccuracy or ambiguity while usingthis Britis

41、h Standard would inform the Secretary of the technical committeeresponsible, the identity of which can be found on the inside front cover. Tel:+44 (0)20 8996 9000. Fax: +44 (0)20 8996 7400.BSI offers members an individual updating service called PLUS which ensuresthat subscribers automatically recei

42、ve the latest editions of standards.Buying standardsOrders for all BSI, international and foreign standards publications should beaddressed to Customer Services. Tel: +44 (0)20 8996 9001. Fax: +44 (0)20 89967001 Email: You may also buy directly using a debit/creditcard from the BSI Shop on the Webs

43、ite http:/ response to orders for international standards, it is BSI policy to supply theBSI implementation of those that have been published as British Standards,unless otherwise requested.Information on standardsBSI provides a wide range of information on national, European andinternational standa

44、rds through its Library and its Technical Help to ExportersService. Various BSI electronic information services are also available whichgive details on all its products and services. Contact Information Centre. Tel:+44 (0)20 8996 7111 Fax: +44 (0)20 8996 7048 Email: Subscribing members of BSI are ke

45、pt up to date with standards developmentsand receive substantial discounts on the purchase price of standards. For detailsof these and other benefits contact Membership Administration. Tel: +44 (0)208996 7002 Fax: +44 (0)20 8996 7001 Email: Information regarding online access to British Standards vi

46、a British StandardsOnline can be found at http:/ information about BSI is available on the BSI website at http:/.CopyrightCopyright subsists in all BSI publications. BSI also holds the copyright, in theUK, of the publications of the international standardization bodies. Except aspermitted under the

47、Copyright, Designs and Patents Act 1988 no extract maybe reproduced, stored in a retrieval system or transmitted in any form or by anymeans electronic, photocopying, recording or otherwise without prior writtenpermission from BSI.This does not preclude the free use, in the course of implementing the

48、 standard,of necessary details such as symbols, and size, type or grade designations. Ifthese details are to be used for any other purpose than implementation then theprior written permission of BSI must be obtained.Details and advice can be obtained from the Copyright and Licensing Manager.Tel: +44 (0)20 8996 7070 Email: