BS EN 3645-009-2006 Aerospace series - Connectors electrical circular scoop-proof triple start threaded coupling operating temperature 175 C or 200 C continuous - Part 009 Receptac.pdf

《BS EN 3645-009-2006 Aerospace series - Connectors electrical circular scoop-proof triple start threaded coupling operating temperature 175 C or 200 C continuous - Part 009 Receptac.pdf》由会员分享，可在线阅读，更多相关《BS EN 3645-009-2006 Aerospace series - Connectors electrical circular scoop-proof triple start threaded coupling operating temperature 175 C or 200 C continuous - Part 009 Receptac.pdf（12页珍藏版）》请在麦多课文档分享上搜索。

1、BRITISH STANDARDBS EN 3645-009:2006Aerospace series Connectors, electrical, circular, scoop-proof, triple start threaded coupling, operating temperature 175 C or 200 C continuous Part 009: Receptacle, round flange, jam nut mounting Product standard The European Standard EN 3645-009:2006 has the stat

2、us of a British StandardICS 49.060g49g50g3g38g50g51g60g44g49g42g3g58g44g55g43g50g56g55g3g37g54g44g3g51g40g53g48g44g54g54g44g50g49g3g40g59g38g40g51g55g3g36g54g3g51g40g53g48g44g55g55g40g39g3g37g60g3g38g50g51g60g53g44g42g43g55g3g47g36g58Licensed Copy: Wang Bin, na, Thu Mar 22 06:36:38 GMT+00:00 2007, U

3、ncontrolled Copy, (c) BSIBS EN 3645-009:2006This British Standard was published under the authority of the Standards Policy and Strategy Committee on 31 January 2007 BSI 2007ISBN 978-0-580-49951-7National forewordThis British Standard was published by BSI. It is the UK implementation of EN 3645-009:

4、2006.The UK participation in its preparation was entrusted by Technical Committee ACE/6, Aerospace avionic electrical and fibre optic technology, to Subcommittee ACE/6/-/3, Aerospace Connectors.A list of organizations represented on ACE/6/-/3 can be obtained on request to its secretary.This publicat

5、ion does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application.Compliance with a British Standard cannot confer immunity from legal obligations.Amendments issued since publicationAmd. No. Date CommentsLicensed Copy: Wang Bin, na, Thu Mar

6、 22 06:36:38 GMT+00:00 2007, Uncontrolled Copy, (c) BSIEUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 3645-009 December 2006 ICS 49.060 English Version Aerospace series - Connectors, electrical, circular, scoop-proof, triple start threaded coupling, operating temperature 175 C or 200 C continu

7、ous - Part 009: Receptacle, round flange, jam nut mounting - Product standard Srie arospatiale - Connecteurs lectriques circulaires contacts protgs, accouplement par filetage pas rapide trois filets, tempratures dutilisation 175 C ou 200 C continu - Partie 009 : Embase collerette ronde fixation par

8、crou - Norme de produit Luft- und Raumfahrt - Elektrische Rundsteckverbinder, kontaktgeschtzt, Drei-gangige Gewinde-Schnellkupplung, Dauerbetriebstemperaturen 175 C oder 200 C - Teil 009: Fester Steckverbinder mit rundem Schwei und Mutternbefestigung - Produktnorm This European Standard was approved

9、 by CEN on 28 September 2006. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national

10、standards may be obtained on application to the Central Secretariat or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notifie

11、d to the Central Secretariat has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherland

12、s, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: rue de Stassart, 36 B-1050 Brussels 2006 CEN All rights of exploitation in

13、any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 3645-009:2006: ELicensed Copy: Wang Bin, na, Thu Mar 22 06:36:38 GMT+00:00 2007, Uncontrolled Copy, (c) BSI2 Contents Page Foreword3 1 Scope 4 2 Normative references 4 3 Terms and definitions .4 4 Required characteris

14、tics.5 5 Designation 8 6 Marking .9 7 Technical specification .9 EN 3645-009:2006Licensed Copy: Wang Bin, na, Thu Mar 22 06:36:38 GMT+00:00 2007, Uncontrolled Copy, (c) BSI3 Foreword This document (EN 3645-009:2006) has been prepared by the Aerospace and Defence Industries Association of Europe - St

15、andardization (ASD-STAN). After enquiries and votes carried out in accordance with the rules of this Association, this Standard has received the approval of the National Associations and the Official Services of the member countries of ASD, prior to its presentation to CEN. This European Standard sh

16、all be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by June 2007, and conflicting national standards shall be withdrawn at the latest by June 2007. Attention is drawn to the possibility that some of the elements of this document

17、 may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Aust

18、ria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. EN 3645-009:2006Lic

19、ensed Copy: Wang Bin, na, Thu Mar 22 06:36:38 GMT+00:00 2007, Uncontrolled Copy, (c) BSI4 1 Scope This standard specifies the characteristics of jam nut mounting receptacles in the family of circular, electrical connectors, with triple start threaded coupling. It applies to models in Table 3. For pl

20、ugs and protective covers, see EN 3645-006, EN 3645-008, EN 3645-011 and EN 3645-012 respectively. For filler plugs and rear accessories associated with this receptacle, see EN 3645-002. These connectors are derived from and interchangeable with models W, F, J, M and K in specification MIL-DTL-38999

21、/24. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 3645-001, Aerospac

22、e series Connectors, electrical, circular, scoop-proof, triple start threaded coupling, operating temperature 175 C or 200 C continuous Part 001: Technical specification. EN 3645-002, Aerospace series Connectors, electrical, circular, scoop-proof, triple start threaded coupling, operating temperatur

23、e 175 C or 200 C continuous Part 002: Specification of performance and contact arrangements. EN 3645-006, Aerospace series Connectors, electrical, circular, scoop-proof, triple start threaded coupling, operating temperature 175 C or 200 C continuous Part 006: Protective cover for receptacle Product

24、standard. EN 3645-008, Aerospace series Connectors, electrical, circular, scoop-proof, triple start threaded coupling, operating temperature 175 C or 200 C continuous Part 008: Non release plug with grounding ring Product standard. EN 3645-011, Aerospace series Connectors, electrical, circular, scoo

25、p-proof, triple start threaded coupling, operating temperature 175 C or 200 C continuous Part 011: Lanyard release plug with grounding fingers Type 1 Product standard. EN 3645-012, Aerospace series Connectors, electrical, circular, scoop-proof, triple start threaded coupling, operating temperature 1

26、75 C or 200 C continuous Part 012: Lanyard release plug with grounding fingers Type 2 Product standard. MIL-DTL-38999/33, Connector, electrical, circular, cover, protective, receptacle, series III, metric. 1)3 Terms and definitions For the purposes of this document, the terms and definitions given i

27、n EN 3645-001 apply. 1) Published by: Department of Defense (DOD), The Pentagon, Washington D.C. 20301 USA. EN 3645-009:2006Licensed Copy: Wang Bin, na, Thu Mar 22 06:36:38 GMT+00:00 2007, Uncontrolled Copy, (c) BSI5 4 Required characteristics 4.1 Dimensions and mass See Figure 1 and Table 1. Dimens

28、ions and tolerances are in millimetres. Key 1 Red strip 2 3 holes 1,5 min. for brake wire (see option according to Detail D) 3 Models J and M: 4,5400,29+, other models: 3,1700,45+4 Blue strip 5 H on flats 6 B on flat 7 Seal NOTE One disengagement is permissible to accept the accessory mounting. Figu

29、re 1 Jam nut receptacle (without seal) (Seal Slot with close edges) Seal EN 3645-009:2006Licensed Copy: Wang Bin, na, Thu Mar 22 06:36:38 GMT+00:00 2007, Uncontrolled Copy, (c) BSI6 Table 1 Jam-nut receptacle Dimensions A B C aD E F bG H Shell size 0,3 + 0,10 0,15 + 0,10 0,20 + 0,13 0,03 0,13 max. T

30、hread 09 30,2 16,53 17,40 15,9 M171 6g 0,1 R 24,00 21,82 11 34,9 19,07 20,60 18,8 M201 6g 0,1 R 27,00 24,99 13 38,1 23,82 25,40 23,8 M251 6g 0,1 R 32,00 29,77 15 41,3 26,97 28,50 26,8 M281 6g 0,1 R 36,00 32,91 17 44,5 30,15 31,85 2,39 1,14 30,8 M321 6g 0,1 R c37,00 36,12 19 49,2 33,32 34,90 33,8 M35

31、1 6g 0,1 R 41,00 39,25 21 52,4 36,50 37,9036,8 M381 6g 0,1 R 46,00 42,47 23 55,6 39,67 41,20 39,8, M411 6g 0,1 R 50,00 45,61 25 58,7 42,85 44,40 3,58 1,91 42,8 M441 6g 0,1 R 55,00 53,54 P S W Y Z Mass g max. + 0,4 0,1 0,4 + 0,7 0,1 AluminiumStainless steel Composite27,0 20,50 20,19 15 35 12 31,8 25,

32、27 24,97 21 45 16 34,9 28,45 28,14 27 60 21 38,1 31,62 31,32 32 70 27 41,3 2,2 34,80 34,49 1,85 1,70 40 90 31 46,0 37,92 37,62 49 104 43 49,2 41,20 40,69 54 117 50 52,4 44,37 43,86 65 132 55 14,3 55,6 3,0 47,55 47,04 2,69 2,54 73 158 65 aDimensions C and 1,5 mm shall be compatible with the panel hol

33、e bDiameter F corresponds to the start of the thread cUpper diameter modified as follow: 31,95 max. 31,80 min. EN 3645-009:2006Licensed Copy: Wang Bin, na, Thu Mar 22 06:36:38 GMT+00:00 2007, Uncontrolled Copy, (c) BSI7 4.2 Materials and surface treatment See Table 3. 4.3 Recommended panel cut-out S

34、ee Figure 2 and Table 2. Dimensions and tolerances are in millimetres. Figure 2 Panel cut-out Panel thickness: 3,20 max. 1,60 min. Table 2 Panel cut-out Dimensions A B C Shell size + 0,25 0 0 0,25 min. 09 17,70 16,99 31,80 11 20,88 19,53 35,00 13 25,58 24,26 39,40 15 28,80 27,53 42,50 17 31,98 30,68

35、 45,70 19 35,15 33,86 48,50 21 38,28 37,06 51,70 23 41,50 40,24 54,90 25 44,68 43,41 58,00 4.4 Electrical, mechanical and climatic characteristics See EN 3645-002. EN 3645-009:2006Licensed Copy: Wang Bin, na, Thu Mar 22 06:36:38 GMT+00:00 2007, Uncontrolled Copy, (c) BSI8 5 Designation EXAMPLE Descr

36、iption block JAM-NUT ELECTRICAL CONNECTOR Identity block EN3645-F6GN35MA Number of the basic standard Model according to Table 3 Shell code for nut fitting receptacle Shell size code according to Table 4 Letter indicating if the contact arrangement have grounded cavities or not N: no grounded cavity

37、 G: grounded cavities Contact arrangement according to EN 3645-002 Contact code according to Table 4 Polarization: N, A, B, C, D, E NOTE If necessary, the code I9005 shall be placed between the description block and the identity block. Table 3 Model coding Model Description W Sealed receptacles, wit

38、h shell in cadmium-plated aluminium alloy, olive green Salt spray resistance 500 h Plug with shielding ring with elastic earthing system Crimped contacts Maximum operating temperature 175 C continuous J Sealed receptacles, with shell in cadmium-plated composite polymer, olive green Salt spray resist

39、ance 2 000 h Plug with shielding ring with elastic earthing system Crimped contact 1 500 operations Maximum operating temperature 175 C continuous F Sealed receptacles, with shell in nickel-plated aluminium alloy Crimped contacts Plug with shielding ring with elastic earthing system Maximum operatin

40、g temperature 200 C continuous M Sealed receptacles, with shell in nickel-plated plastic composite Salt spray resistance 2 000 h Plug with shielding ring with elastic earthing system Crimped contacts 1 500 operations Maximum operating temperature 200 C continuous K Sealed receptacles, with shell in

41、passivated stainless steel Salt spray resistance 500 h Plug with shielding ring with elastic earthing system Fire resistant Crimped contacts Maximum operating temperature 200 C continuous EN 3645-009:2006Licensed Copy: Wang Bin, na, Thu Mar 22 06:36:38 GMT+00:00 2007, Uncontrolled Copy, (c) BSI9 Tab

42、le 4 Shell size code Shell size Code 09 A 11 B 13 C 15 D 17 E 19 F 21 G23 H 25 J Table 5 Contact code Order coding Contacts Product marking Supplied without contacts Supplied with contacts EN3155-xxxx2222 EN3155-xxxx2020 EN3155-xxxx1616 EN3155-xxxx1212 EN3155-xxxx1010 Male M A M Female F B F 6 Marki

43、ng According to EN 3645-001. 7 Technical specification According to EN 3645-001. EN 3645-009:2006Licensed Copy: Wang Bin, na, Thu Mar 22 06:36:38 GMT+00:00 2007, Uncontrolled Copy, (c) BSIBS EN 3645-009:2006BSI389 Chiswick High RoadLondonW4 4ALBSI British Standards InstitutionBSI is the independent

44、national body responsible for preparing British Standards. It presents the UK view on standards in Europe and at the international level. It is incorporated by Royal Charter.RevisionsBritish Standards are updated by amendment or revision. Users of British Standards should make sure that they possess

45、 the latest amendments or editions.It is the constant aim of BSI to improve the quality of our products and services. We would be grateful if anyone finding an inaccuracy or ambiguity while using this British Standard would inform the Secretary of the technical committee responsible, the identity of

46、 which can be found on the inside front cover. Tel: +44 (0)20 8996 9000. Fax: +44 (0)20 8996 7400.BSI offers members an individual updating service called PLUS which ensures that subscribers automatically receive the latest editions of standards.Buying standardsOrders for all BSI, international and

47、foreign standards publications should be addressed to Customer Services. Tel: +44 (0)20 8996 9001. Fax: +44 (0)20 8996 7001. Email: ordersbsi-. Standards are also available from the BSI website at http:/www.bsi-.In response to orders for international standards, it is BSI policy to supply the BSI im

48、plementation of those that have been published as British Standards, unless otherwise requested.Information on standardsBSI provides a wide range of information on national, European and international standards through its Library and its Technical Help to Exporters Service. Various BSI electronic i

49、nformation services are also available which give details on all its products and services. Contact the Information Centre. Tel: +44 (0)20 8996 7111. Fax: +44 (0)20 8996 7048. Email: infobsi-.Subscribing members of BSI are kept up to date with standards developments and receive substantial discounts on the purchase price of standards. For details of th