BS EN 3475-513-2005 Cables electrical aircraft use - Test methods - Part 513 Deformation resistance (Installation with plastic cable ties)《航空器用电缆 试验方法 第513部分 耐变形(用塑料电缆扎带安装)》.pdf

《BS EN 3475-513-2005 Cables electrical aircraft use - Test methods - Part 513 Deformation resistance (Installation with plastic cable ties)《航空器用电缆 试验方法 第513部分 耐变形(用塑料电缆扎带安装)》.pdf》由会员分享，可在线阅读，更多相关《BS EN 3475-513-2005 Cables electrical aircraft use - Test methods - Part 513 Deformation resistance (Installation with plastic cable ties)《航空器用电缆 试验方法 第513部分 耐变形(用塑料电缆扎带安装)》.pdf（8页珍藏版）》请在麦多课文档分享上搜索。

1、BRITISH STANDARD AEROSPACE SERIES BS EN 3475-513:2005 Cables, electrical, aircraft use Test methods Part 513: Deformation resistance (Installation with plastic cable ties) The European Standard EN 3475-513:2005 has the status of a British Standard ICS 49.060 Licensed Copy: Wang Bin, na, Mon May 08 0

2、3:37:51 BST 2006, Uncontrolled Copy, (c) BSIBS EN 3475-513:2005 This British Standard was published under the authority of the Standards Policy and Strategy Committee on 10 February 2006 BSI 10 February 2006 ISBN 0 580 47795 9 National foreword This British Standard is the official English language

3、version of EN 3475-513:2005. The UK participation in its preparation was entrusted by Technical Committee ACE/6, Aerospace avionic electrical and fibre optic technology, to Subcommittee ACE/6/-/2, Aerospace Cables, which has the responsibility to: aid enquirers to understand the text; present to the

4、 responsible international/European committee any enquiries on the interpretation, or proposals for change, and keep UK interests informed; monitor related international and European developments and promulgate them in the UK. A list of organizations represented on this subcommittee can be obtained

5、on request to its secretary. Cross-references The British Standards which implement international or European publications referred to in this document may be found in the BSI Catalogue under the section entitled “International Standards Correspondence Index”, or by using the “Search” facility of th

6、e BSI Electronic Catalogue or of British Standards Online. This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. Summary

7、 of pages This document comprises a front cover, an inside front cover, the EN title page, pages 2 to 5 and a back cover. The BSI copyright notice displayed in this document indicates when the document was last issued. Amendments issued since publication Amd. No. Date Comments Licensed Copy: Wang Bi

8、n, na, Mon May 08 03:37:51 BST 2006, Uncontrolled Copy, (c) BSIEUROPEANSTANDARD NORMEEUROPENNE EUROPISCHENORM EN3475513 October2005 ICS49.060 EnglishVersion AerospaceseriesCables,electrical,aircraftuseTest methodsPart513:Deformationresistance(Installationwith plasticcableties) SriearospatialeCblesle

9、ctriquesusage aronautiqueMthodesdessaisPartie513: Dformationmcanique(Installationaveccollierde frettage) LuftundRaumfahrtElektrischeLeitungenfr LuftfahrtverwendungPrfverfahrenTeil513: Verformungsbestndigkeit ThisEuropeanStandardwasapprovedbyCENon12September2005. CENmembersareboundtocomplywiththeCEN/

10、CENELECInternalRegulationswhichstipulatetheconditionsforgivingthisEurope an Standardthestatusofanationalstandardwithoutanyalteration.Uptodatelistsandbibliographicalreferencesconcernings uchnational standardsmaybeobtainedonapplicationtotheCentralSecretariatortoanyCENmember. ThisEuropeanStandardexists

11、inthreeofficialversions(English,French,German).Aversioninanyotherlanguagemadebytra nslation undertheresponsibilityofaCENmemberintoitsownlanguageandnotifiedtotheCentralSecretariathasthesamestatusast heofficial versions. CENmembersarethenationalstandardsbodiesofAustria,Belgium,Cyprus,CzechRepublic,Den

12、mark,Estonia,Finland,France, Germany,Greece,Hungary,Iceland,Ireland,Italy,Latvia,Lithuania,Luxembourg,Malta,Netherlands,Norway,Poland,Portugal, Slovakia, Slovenia,Spain,Sweden,SwitzerlandandUnitedKingdom. EUROPEANCOMMITTEEFORSTANDARDIZATION COMITEUROPENDENORMALISATION EUROPISCHESKOMITEEFRNORMUNG Man

13、agementCentre:ruedeStassart,36B1050Brussels 2005CEN Allrightsofexploitationinanyformandbyanymeansreserved worldwideforCENnationalMembers. Ref.No.EN3475513:2005:E Licensed Copy: Wang Bin, na, Mon May 08 03:37:51 BST 2006, Uncontrolled Copy, (c) BSIEN 3475-513:2005 2 Contents Page Foreword 3 1 Scope .

14、4 2 Normative references .4 3 Preparation of specimens 4 4 Test method.5 5 Requirement 5 Licensed Copy: Wang Bin, na, Mon May 08 03:37:51 BST 2006, Uncontrolled Copy, (c) BSIEN 3475-513:2005 3 Foreword This European Standard (EN 3475-513:2005) has been prepared by the European Association of Aerospa

15、ce Manufacturers - Standardization (AECMA-STAN). After enquiries and votes carried out in accordance with the rules of this Association, this Standard has received the approval of the National Associations and the Official Services of the member countries of AECMA, prior to its presentation to CEN.

16、This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by April 2006, and conflicting national standards shall be withdrawn at the latest by April 2006. Attention is drawn to the possibility that some of th

17、e elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement t

18、his European Standard: Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. L

19、icensed Copy: Wang Bin, na, Mon May 08 03:37:51 BST 2006, Uncontrolled Copy, (c) BSI4 1 Scope This product standard defines a test method to evaluate the performance of a coaxial cable after the installation of plastic cable ties. It shall be used together with EN 3475-100. 2 Normative references Th

20、e following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 3475-100, Aerospace series Cables, electrical, a

21、ircraft use Test methods Part 100: General. EN 3475-805, Aerospace series Cables, electrical, aircraft use Test methods Part 805: Characteristic impedance. EN 4056-003, Aerospace series Cable ties for harnesses Part 003: Plastic cable ties, operating temperatures 65 C to 105 C and 65 C to 150 C Prod

22、uct standard. 1)3 Preparation of specimens 3.1 Required parts / samples 12 plastic cable ties, type EN 4056-003 Type 1, size code S. Test is to perform on four specimens made up of two cable pieces. 3.2 Conditioning Cut eight pieces of the test cable to a length of (500 20) mm. Use three plastic cab

23、le ties per specimen to bundle two cable pieces. Place the first cable tie approximately 100 mm from the end which was connected to the TDR (to measure the initial impedance). Place the second cable tie at a distance of (100 5) mm to the first, the third cable tie in a distance of 100 mm to the seco

24、nd. Use the application tool to fix all cable ties, the force which has to be applied will be defined in the product standard. 3.3 Initial measurement Measure the impedance of each specimen (on both pieces of cable) in accordance with EN 3475-805, method B. Plot the results. 1) Published as AECMA Pr

25、estandard at the date of publication of this standard. EN 3475-513:2005 Licensed Copy: Wang Bin, na, Mon May 08 03:37:51 BST 2006, Uncontrolled Copy, (c) BSI5 4 Test method 4.1 Specimens shall be prepared as defined in 3.2. 4.2 First test To be performed on two specimens. Measure the impedance of ea

26、ch cable again in accordance with EN 3475-805, method B. Plot the results. Compare the impedance before and after the cable ties have been applied to cable bundle. 4.3 Second test To be performed on two specimens. Store the cable bundle for eight hours in an air convection oven at a temperature of (

27、130 5) C. Cool the cable bundle for four hours to six hours to room temperature. Measure the impedance of each cable again in accordance with EN 3475-805, method B. Plot the results. Compare the impedance before and after the cable ties have been applied to cable bundle. 5 Requirement The impedance

28、shall not deviate more than five per cent from the originally recorded values. EN 3475-513:2005 Licensed Copy: Wang Bin, na, Mon May 08 03:37:51 BST 2006, Uncontrolled Copy, (c) BSIBS EN 3475-513:2005 BSI 389 Chiswick High Road London W4 4AL BSI British Standards Institution BSI is the independent n

29、ational body responsible for preparing British Standards. It presents the UK view on standards in Europe and at the international level. It is incorporated by Royal Charter. Revisions British Standards are updated by amendment or revision. Users of British Standards should make sure that they posses

30、s the latest amendments or editions. It is the constant aim of BSI to improve the quality of our products and services. We would be grateful if anyone finding an inaccuracy or ambiguity while using this British Standard would inform the Secretary of the technical committee responsible, the identity

31、of which can be found on the inside front cover. Tel: +44 (0)20 8996 9000. Fax: +44 (0)20 8996 7400. BSI offers members an individual updating service called PLUS which ensures that subscribers automatically receive the latest editions of standards. Buying standards Orders for all BSI, international

32、 and foreign standards publications should be addressed to Customer Services. Tel: +44 (0)20 8996 9001. Fax: +44 (0)20 8996 7001. Email: ordersbsi-. Standards are also available from the BSI website at http:/www.bsi-. In response to orders for international standards, it is BSI policy to supply the

33、BSI implementation of those that have been published as British Standards, unless otherwise requested. Information on standards BSI provides a wide range of information on national, European and international standards through its Library and its Technical Help to Exporters Service. Various BSI elec

34、tronic information services are also available which give details on all its products and services. Contact the Information Centre. Tel: +44 (0)20 8996 7111. Fax: +44 (0)20 8996 7048. Email: infobsi-. Subscribing members of BSI are kept up to date with standards developments and receive substantial

35、discounts on the purchase price of standards. For details of these and other benefits contact Membership Administration. Tel: +44 (0)20 8996 7002. Fax: +44 (0)20 8996 7001. Email: membershipbsi-. Information regarding online access to British Standards via British Standards Online can be found at ht

36、tp:/www.bsi- Further information about BSI is available on the BSI website at http:/www.bsi-. Copyright Copyright subsists in all BSI publications. BSI also holds the copyright, in the UK, of the publications of the international standardization bodies. Except as permitted under the Copyright, Desig

37、ns and Patents Act 1988 no extract may be reproduced, stored in a retrieval system or transmitted in any form or by any means electronic, photocopying, recording or otherwise without prior written permission from BSI. This does not preclude the free use, in the course of implementing the standard, o

38、f necessary details such as symbols, and size, type or grade designations. If these details are to be used for any other purpose than implementation then the prior written permission of BSI must be obtained. Details and advice can be obtained from the Copyright & Licensing Manager. Tel: +44 (0)20 8996 7070. Fax: +44 (0)20 8996 7553. Email: copyrightbsi-. Licensed Copy: Wang Bin, na, Mon May 08 03:37:51 BST 2006, Uncontrolled Copy, (c) BSI