BS EN 3475-408-2005 Cables electrical aircraft use - Test methods - Part 408 Fire resistance《航空器用电缆 试验方法 第408部分 耐燃性》.pdf

《BS EN 3475-408-2005 Cables electrical aircraft use - Test methods - Part 408 Fire resistance《航空器用电缆 试验方法 第408部分 耐燃性》.pdf》由会员分享，可在线阅读，更多相关《BS EN 3475-408-2005 Cables electrical aircraft use - Test methods - Part 408 Fire resistance《航空器用电缆 试验方法 第408部分 耐燃性》.pdf（12页珍藏版）》请在麦多课文档分享上搜索。

1、BRITISH STANDARD AEROSPACE SERIES BS EN 3475-408:2005 Cables, electrical, aircraft use Test methods Part 408: Fire resistance The European Standard EN 3475-408:2005 has the status of a British Standard ICS 49.060 Licensed Copy: Wang Bin, na, Mon May 08 03:32:10 BST 2006, Uncontrolled Copy, (c) BSIBS

2、 EN 3475-408:2005 This British Standard was published under the authority of the Standards Policy and Strategy Committee on 13 February 2006 BSI 13 February 2006 ISBN 0 580 47790 8 National foreword This British Standard is the official English language version of EN 3475-408:2005. The UK participat

3、ion in its preparation was entrusted by Technical Committee ACE/6, Aerospace avionic electrical and fibre optic technology, to Subcommittee ACE/6/-/2, Aerospace Cables, which has the responsibility to: aid enquirers to understand the text; present to the responsible international/European committee

4、any enquiries on the interpretation, or proposals for change, and keep UK interests informed; monitor related international and European developments and promulgate them in the UK. A list of organizations represented on this subcommittee can be obtained on request to its secretary. Cross-references

5、The British Standards which implement international or European publications referred to in this document may be found in the BSI Catalogue under the section entitled “International Standards Correspondence Index”, or by using the “Search” facility of the BSI Electronic Catalogue or of British Stand

6、ards Online. This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. Summary of pages This document comprises a front cove

7、r, an inside front cover, the EN title page, pages 2 to 8, an inside back cover and a back cover. The BSI copyright notice displayed in this document indicates when the document was last issued. Amendments issued since publication Amd. No. Date Comments Licensed Copy: Wang Bin, na, Mon May 08 03:32:

8、10 BST 2006, Uncontrolled Copy, (c) BSIEUROPEANSTANDARD NORMEEUROPENNE EUROPISCHENORM EN3475408 November2005 ICS49.060 EnglishVersion AerospaceseriesCables,electrical,aircraftuseTest methodsPart408:Fireresistance SriearospatialeCbleslectriquesusage aronautiqueMthodesdessaisPartie408:Rsistance aufeu

9、LuftundRaumfahrtElektrischeLeitungenfr LuftfahrtverwendungPrfverfahrenTeil408: Feuerbestndigkeit ThisEuropeanStandardwasapprovedbyCENon12September2005. CENmembersareboundtocomplywiththeCEN/CENELECInternalRegulationswhichstipulatetheconditionsforgivingthisEurope an Standardthestatusofanationalstandar

10、dwithoutanyalteration.Uptodatelistsandbibliographicalreferencesconcernings uchnational standardsmaybeobtainedonapplicationtotheCentralSecretariatortoanyCENmember. ThisEuropeanStandardexistsinthreeofficialversions(English,French,German).Aversioninanyotherlanguagemadebytra nslation undertheresponsibil

11、ityofaCENmemberintoitsownlanguageandnotifiedtotheCentralSecretariathasthesamestatusast heofficial versions. CENmembersarethenationalstandardsbodiesofAustria,Belgium,Cyprus,CzechRepublic,Denmark,Estonia,Finland,France, Germany,Greece,Hungary,Iceland,Ireland,Italy,Latvia,Lithuania,Luxembourg,Malta,Net

12、herlands,Norway,Poland,Portugal, Slovakia, Slovenia,Spain,Sweden,SwitzerlandandUnitedKingdom. EUROPEANCOMMITTEEFORSTANDARDIZATION COMITEUROPENDENORMALISATION EUROPISCHESKOMITEEFRNORMUNG ManagementCentre:ruedeStassart,36B1050Brussels 2005CEN Allrightsofexploitationinanyformandbyanymeansreserved world

13、wideforCENnationalMembers. Ref.No.EN3475408:2005:E Licensed Copy: Wang Bin, na, Mon May 08 03:32:10 BST 2006, Uncontrolled Copy, (c) BSIEN 3475-408:2005 2 Contents Page Foreword 3 1 Scope .4 2 Normative references .4 3 Preparation of specimens 4 4 Apparatus 4 5 Method .5 6 Requirements 8 Licensed Co

14、py: Wang Bin, na, Mon May 08 03:32:10 BST 2006, Uncontrolled Copy, (c) BSIEN 3475-408:2005 3 Foreword This European Standard (EN 3475-408:2005) has been prepared by the European Association of Aerospace Manufacturers - Standardization (AECMA-STAN). After enquiries and votes carried out in accordance

15、 with the rules of this Association, this Standard has received the approval of the National Associations and the Official Services of the member countries of AECMA, prior to its presentation to CEN. This European Standard shall be given the status of a national standard, either by publication of an

16、 identical text or by endorsement, at the latest by May 2006, and conflicting national standards shall be withdrawn at the latest by May 2006. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held re

17、sponsible for identifying any or all such patent rights. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germ

18、any, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. Licensed Copy: Wang Bin, na, Mon May 08 03:32:10 BST 2006, Uncontrolled Copy, (c) BSI4 1 Scope This stand

19、ard specifies a method of testing the fire resistance of “fire-proof“ electrical cables. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition

20、of the referenced document (including any amendments) applies. ISO 2685:1998, Aircraft Environmental test procedure for airborne equipment Resistance to fire in designated fire zones. EN 3909, Aerospace series Test fluids for electric components and sub-assemblies. 1)3 Preparation of specimens Six t

21、est specimens, 0,75 m minimum length, shall be selected at random from a quantity of cable. 4 Apparatus 4.1 List of apparatus The following shall be required for this test: a burner, a test fixture, and test fluids. 4.2 Burner The burner shall be as described in Annex A of ISO 2685 or any other burn

22、er or assembly of burners satisfying the following conditions: the minimum width of the burner shall be 50 mm; cable length exposed to the flame: 152 mm; diameter or width of the flame at the base of the burner(s) 2 D (D diameter of the cable under test); flame temperature: (1 100 80) C; heat flux d

23、ensity received by the calorimeter described in Annex B of ISO 2685: (116 10) kW/m 2 . 4.3 Test fixture Refer to Figures 1 and 2. The distance between the burner nose and the cable under test shall be as specified in ISO 2685 Annex A. The frame of the test fixture shall be vibrated with the followin

24、g characteristics: direction perpendicular to the axis of the cable; frequency: (30 5) Hz; minimum acceleration: 4 g. 1) Published as AECMA Prestandard at the date of publication of this standard. EN 3475-408:2005 Licensed Copy: Wang Bin, na, Mon May 08 03:32:10 BST 2006, Uncontrolled Copy, (c) BSI5

25、 4.4 Fluids The test fluids listed below shall be in accordance with EN 3909. aircraft fuel (kerosene); hydraulic fluid (phosphate base); lubricant (synthetic oil); cleaning product (isopropylic alcohol); de-icing fluid (ethylene glycol). 5 Method 5.1 Preparation The test shall be conducted in still

26、 air. The centre section of each of the specimens shall be immersed over a length of 0,5 m for 24 h at ambient temperature, one sample in each of the test fluids. After removal from the test fluid any surplus fluid shall be removed with a lint free cloth. The sample shall stand for 1 h. Each sample

27、shall be mounted onto a frame as shown in Figure 1. Each sample shall be wrapped once around with two nickel-chrome ribbons with their inner edges spaced (25 5) mm apart. The sample and test ribbons shall be weighted, as shown in Figure 1, and the test assembly adjusted so that the area wrapped by t

28、he ribbons is located at the appropriate distance above the burner where the temperature is 1 100 C. After tensioning with weights, the samples and test ribbons shall be locked at the pulley position to avoid the weights giving high loading under vibration/resonant conditions. Single core samples sh

29、all be connected to a circuit as shown in Figure 2. Multi-core samples shall be connected to a circuit as shown in Figure 3. Screen cables (metal braid) shall be connected to a circuit as shown in Figure 4. 5.2 Procedure 5.2.1 Note the line current (approximately 2 A); 5.2.2 Operate the switch and o

30、bserve a 25 mA reading; 5.2.3 Leakage current flow shall not exceed 12,5 mA during the test period. 5.2.4 Sample continuity is shown when a current flow of 2 A is registered with the electrical supply switched on. The insulation degradation detection circuit shall be checked by depressing the test s

31、witch; an indication of 25 mA flow should be registered. 5.2.5 Each sample shall be simultaneously subjected to the combined flame and vibration test. The test duration shall be: 5 minutes for fire resistant cables; 15 minutes for fire proof cables. EN 3475-408:2005 Licensed Copy: Wang Bin, na, Mon

32、May 08 03:32:10 BST 2006, Uncontrolled Copy, (c) BSI6 Key 1 Tensioning springs 2 Nickel-chrome ribbons 3 Cable test specimen 4 Test burner 5 Weights: cables 004 to 030: 170 g cables 050 to 220: 340 g Figure 1 Test fixture 5 1 2 4 3 1 (1,5 0,25) mm X 3 2 X EN 3475-408:2005 Licensed Copy: Wang Bin, na

33、, Mon May 08 03:32:10 BST 2006, Uncontrolled Copy, (c) BSI7 Key 1 Test switch 2 Nickel-chrome ribbons 3 Cable test specimen Figure 2 Circuit diagram for single core cables Test 1 Core-to-core integrity Key 1 Cable test specimen 2 Test switch Figure 3 Circuit diagram for multi-core cables 1 0 A 5 A 0

34、 mA 100 mA (1,5 0,25) mm 2 3 0 A 5 A 0 mA 100 mA 1 2 EN 3475-408:2005 Licensed Copy: Wang Bin, na, Mon May 08 03:32:10 BST 2006, Uncontrolled Copy, (c) BSI8 Test 2 Core-to-screen integrity Key 1 Connect all cores together 2 Cable test specimen 3 Connection to metal screen 4 Test switch Figure 4 Circ

35、uit diagram for screened cables 6 Requirements Check electrical continuity and insulation resistance of the conductor before, continuously throughout and after the test. The maximum current value of 12,5 mA corresponding to an insulation resistance of 10 000 shall not be exceeded. 0 to 5 A 0 A 5 A 0

36、 mA 100 mA 4 3 3 1 2 EN 3475-408:2005 Licensed Copy: Wang Bin, na, Mon May 08 03:32:10 BST 2006, Uncontrolled Copy, (c) BSIblank Licensed Copy: Wang Bin, na, Mon May 08 03:32:10 BST 2006, Uncontrolled Copy, (c) BSIBS EN 3475-408:2005 BSI 389 Chiswick High Road London W4 4AL BSI British Standards Ins

37、titution BSI is the independent national body responsible for preparing British Standards. It presents the UK view on standards in Europe and at the international level. It is incorporated by Royal Charter. Revisions British Standards are updated by amendment or revision. Users of British Standards

38、should make sure that they possess the latest amendments or editions. It is the constant aim of BSI to improve the quality of our products and services. We would be grateful if anyone finding an inaccuracy or ambiguity while using this British Standard would inform the Secretary of the technical com

39、mittee responsible, the identity of which can be found on the inside front cover. Tel: +44 (0)20 8996 9000. Fax: +44 (0)20 8996 7400. BSI offers members an individual updating service called PLUS which ensures that subscribers automatically receive the latest editions of standards. Buying standards

40、Orders for all BSI, international and foreign standards publications should be addressed to Customer Services. Tel: +44 (0)20 8996 9001. Fax: +44 (0)20 8996 7001. Email: ordersbsi-. Standards are also available from the BSI website at http:/www.bsi-. In response to orders for international standards

41、, it is BSI policy to supply the BSI implementation of those that have been published as British Standards, unless otherwise requested. Information on standards BSI provides a wide range of information on national, European and international standards through its Library and its Technical Help to Ex

42、porters Service. Various BSI electronic information services are also available which give details on all its products and services. Contact the Information Centre. Tel: +44 (0)20 8996 7111. Fax: +44 (0)20 8996 7048. Email: infobsi-. Subscribing members of BSI are kept up to date with standards deve

43、lopments and receive substantial discounts on the purchase price of standards. For details of these and other benefits contact Membership Administration. Tel: +44 (0)20 8996 7002. Fax: +44 (0)20 8996 7001. Email: membershipbsi-. Information regarding online access to British Standards via British St

44、andards Online can be found at http:/www.bsi- Further information about BSI is available on the BSI website at http:/www.bsi-. Copyright Copyright subsists in all BSI publications. BSI also holds the copyright, in the UK, of the publications of the international standardization bodies. Except as per

45、mitted under the Copyright, Designs and Patents Act 1988 no extract may be reproduced, stored in a retrieval system or transmitted in any form or by any means electronic, photocopying, recording or otherwise without prior written permission from BSI. This does not preclude the free use, in the cours

46、e of implementing the standard, of necessary details such as symbols, and size, type or grade designations. If these details are to be used for any other purpose than implementation then the prior written permission of BSI must be obtained. Details and advice can be obtained from the Copyright & Licensing Manager. Tel: +44 (0)20 8996 7070. Fax: +44 (0)20 8996 7553. Email: copyrightbsi-. Licensed Copy: Wang Bin, na, Mon May 08 03:32:10 BST 2006, Uncontrolled Copy, (c) BSI