BS EN 3218-002-2006 Aerospace series - Connectors rectangular with metallic shells and screw-locking - Part 002 Specification of performance and contact arrangements《航空航天系列 金属壳和螺钉锁.pdf

《BS EN 3218-002-2006 Aerospace series - Connectors rectangular with metallic shells and screw-locking - Part 002 Specification of performance and contact arrangements《航空航天系列 金属壳和螺钉锁.pdf》由会员分享，可在线阅读，更多相关《BS EN 3218-002-2006 Aerospace series - Connectors rectangular with metallic shells and screw-locking - Part 002 Specification of performance and contact arrangements《航空航天系列 金属壳和螺钉锁.pdf（14页珍藏版）》请在麦多课文档分享上搜索。

1、 g49g50g3g38g50g51g60g44g49g42g3g58g44g55g43g50g56g55g3g37g54g44g3g51g40g53g48g44g54g54g44g50g49g3g40g59g38g40g51g55g3g36g54g3g51g40g53g48g44g55g55g40g39g3g37g60g3g38g50g51g60g53g44g42g43g55g3g47g36g58metallic shells and screw-locking Part 002: Specification of performance and contact arrangementsTh

2、e European Standard EN 3218-002:2006 has the status of a British StandardICS 49.060Aerospace series Connectors, rectangular, with BRITISH STANDARDBS EN 3218-002:2006BS EN 3218-002:2006This British Standard was published under the authority of the Standards Policy and Strategy Committee on 29 Septemb

3、er 2006 BSI 2006ISBN 0 580 49179 XAmendments issued since publicationAmd. No. Date CommentsThis publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application.Compliance with a British Standard cannot confer immunity from legal o

4、bligations.National forewordThis British Standard was published by BSI. It is the UK implementation of EN 3218-002:2006.The UK participation in its preparation was entrusted by Technical Committee ACE/6, Aerospace avionic electrical and fibre optic technology, to Subcommittee ACE/6/-/3, Aerospace Co

5、nnectors.A list of organizations represented on ACE/6/-/3 can be obtained on request to its secretary.EUROPEAN STANDARDNORME EUROPENNEEUROPISCHE NORMEN 3218-002April 2006ICS 49.060English VersionAerospace series - Connectors, rectangular, with metallic shellsand screw-locking - Part 002: Specificati

6、on of performance andcontact arrangementsSrie arospatiale - Connecteurs rectangulaires botiersmtalliques et verrouillage par vis - Partie 002 :Spcification de performances et darrangements descontactsLuft- und Raumfahrt - Rechtecksteckverbinder mitmetallischem Gehuse und Schraubverriegelung - Teil 0

7、02:Leistungsdaten und KontaktanordnungenThis European Standard was approved by CEN on 27 February 2006.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. U

8、p-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Central Secretariat or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder

9、 the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,Germany, Greece, Hungary, Iceland

10、, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania,Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMIT EUROPEN DE NORMALISATIONEUROPISCHES KOMITEE FR NORMUNGManagement Centre: rue de Stassar

11、t, 36 B-1050 Brussels 2006 CEN All rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 3218-002:2006: EEN 3218-002:2006 (E) 2 Contents Page Foreword 3 1 Scope .4 2 Normative references .4 3 Coding of connector models and finishing of housings .5

12、 4 Definitions .5 5 Operating conditions 5 6 List of product standards.7 7 Polarization and coding7 8 Contact arrangements 9 9 Contacts.10 10 Filler plugs.10 11 Tools 10 12 Marking 10 13 Assembly and wiring instructions.10 EN 3218-002:2006 (E) 3 Foreword This document (EN 3218-002:2006) has been pre

13、pared by the European Association of Aerospace Manufacturers - Standardization (AECMA-STAN). After enquiries and votes carried out in accordance with the rules of this Association, this Standard has received the approval of the National Associations and the Official Services of the member countries

14、of AECMA, prior to its presentation to CEN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by October 2006, and conflicting national standards shall be withdrawn at the latest by October 2006. Atten

15、tion is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. According to the CEN/CENELEC Internal Regulations, the national standards organizations of

16、the following countries are bound to implement this European Standard: Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slove

17、nia, Spain, Sweden, Switzerland and the United Kingdom. EN 3218-002:2006 (E) 4 1 Scope This standard specifies the performance and contact arrangements of rectangular connectors with metallic shells and screw-locking as defined in EN 3218-001. 2 Normative references The following referenced document

18、s are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 2265-002, Aerospace series Cables, electrical, for general purpose Operating te

19、mperatures between 55 C and 150 C Part 002: General. 1)EN 2266-002, Aerospace series Cables, electrical, for general purpose Operating temperatures between 55 C and 200 C Part 002: General. EN 2591-209, Aerospace series Elements of electrical and optical connection Test methods Part 209: Current tem

20、perature derating. EN 3155-022, Aerospace series Electrical contacts used in elements of connection Part 022: Contacts, electrical rectangular, male, type A, crimp, class R Product standard. EN 3155-023, Aerospace series Electrical contacts used in elements of connection Part 023: Contacts, electric

21、al rectangular, female, type A, crimp, class R Product standard. EN 3197, Aerospace series Installation of aircraft electrical and optical interconnection systems. 1)EN 3218-001, Aerospace series Connectors, rectangular, with metallic shells and screw-locking Part 001: Technical specification. EN 32

22、18-005, Aerospace series Connectors, rectangular, with metallic shells and screw-locking Part 005: Plug with non-removable size 22 solder contacts Product standard. EN 3218-006, Aerospace series Connectors, rectangular, with metallic shells and screw-locking Part 006: Receptacle with non-removable s

23、ize 22 solder contacts Product standard. EN 3218-007, Aerospace series Connectors, rectangular, with metallic shells and screw-locking Part 007: Plug with rear-removable size 20 crimp contacts Product standard. EN 3218-008, Aerospace series Connectors, rectangular, with metallic shells and screw-loc

24、king Part 008: Receptacle with rear-removable size 20 crimp contacts Product standard. EN 3218-009, Aerospace series Connectors, rectangular, with metallic shells and screw-locking Part 009: Protective covers for EN 3218-005 and EN 3218-007 connectors Product standard. EN 3218-010, Aerospace series

25、Connectors, rectangular, with metallic shells and screw-locking Part 010: Protective covers for EN 3218-006 and EN 3218-008 connectors Product standard. EN 3218-011, Aerospace series Connectors, rectangular, with metallic shells and screw-locking Part 011: Tool, insert extraction for EN 3218-005 to

26、EN 3218-008 connectors Product standard. 1) Published as AECMA Pre-standard at the date of publication of this standard. EN 3218-002:2006 (E) 5 EN 4008-003, Aerospace series Elements of electrical and optical connection General accessories and tooling Part 003: Filler plugs for contacts used in elem

27、ents of electrical connection Product standard.2) 3 Coding of connector models and finishing of housings See Table 1. Table 1 Code Connector model Code Finishing of housing A Receptacle D Plug T Protective cover for plug U Protective cover for receptacle A C N Anodized Cadmium-plated Nickel-plated 4

28、 Definitions See EN 3218-001. 5 Operating conditions 5.1 Mating of plug and receptacle A plug shall be mated with a receptacle having the same finish. 5.2 Mating of protective cover and connector The protective cover shall have the same finish as the plug or receptacle to which it is fitted. 5.3 Typ

29、e of termination See Table 2. 2) In preparation at the date of publication of this standard. EN 3218-002:2006 (E) 6 Table 2 Code Type of termination 1C 1C - Crimp contact, size 22, front-removable 1C0 1C0 Without contacts 1C1 1C1 With contacts for cable size code 006 a 1C2 1C2 With contacts for cabl

30、e sizes codes 004 and 002 a 1C3 1C3 With contacts for cable size code 001a2D 2D - Fixed solder contact, size 22 2D1 2D1 With contacts for cable sizes codes 002, 004, 006 and 010 a 2D2 2D2 With contacts for cable sizes codes 001, 002, 004 and 006 a 2F 2F - Crimp contact, size 20, rear-removable 2F0 2

31、F0 Without contacts 2F1 2F1 With contacts for cable sizes codes 001, 002, 004 and 006 a aAccording to Table 3. 5.4 Permissible cables The connectors covered by this standard shall be used with cables which dimensions are defined in Table 3. Table 3 Size code a Section mm2AWGb Diameter on insulation

32、mm min. max. 010 c 1,00 18 1,44 1,60 006 0,60 20 1,20 1,60004 0,40 22 0,96 1,35 002 0,25 24 0,82 1,35001 0,15 26 0,72 1,02 aSee EN 2265-002 or EN 2266-002. bClosest American Wire Gauge. cCable usable only for solder contacts. EN 3218-002:2006 (E) 7 5.5 Operating characteristics 5.5.1 Electrical char

33、acteristics Heating: see EN 3218-001 and EN 2591-209. Insulation resistance at room temperature: 5 000 MW Withstand voltage: at sea level: 1 500 V root-mean-square value 1,1 kPa (30 000 m): 400 V root-mean-square value Permissible current per contact: according to contact standards 5.5.2 Climatic ch

34、aracteristics Operating temperature: from 65 C to 150 C Resistance to corrosion and fluids: see EN 3218-001. 5.5.3 Mechanical characteristics Number of mating and unmating operations: 500 6 List of product standards EN 3218-005, EN 3218-006, EN 3218-007, EN 3218-008, EN 3218-009, EN 3218-010 and EN

35、3218-011. 7 Polarization and coding Coding is done by the user. See Table 4. EN 3218-002:2006 (E) 8 Table 4 Receptacle Code Plug NOTE The black area represents the position of the coding pin. The position of the connector coding keys between connectors is the view on the mating face. EN 3218-002:200

36、6 (E) 9 8 Contact arrangements See Table 5. Table 5 Arrangement code Male contacts Female contacts View on mating face Number of contacts Size of contactsM11 F11 10 22 M12 F12 10 22 M13 F13 20 22 M21 F21 20 22 M22 F22 20 22 M23 F23 40 22 M14 F14 20 20 M24 F24 40 20 The equivalent sizes 20 and 22 con

37、tact arrangements in the same housing size are intermateable. For example, arrangement M13 with size 22 male contacts is intermateable with arrangement F14 with size 20 female contacts. In this case, the maximum permissible current is that of the smallest contact. EN 3218-002:2006 (E) 10 9 Contacts

38、The solder contacts are integral with the inserts. The removable crimp contacts are defined in: EN 3155-022, male contact size 20; EN 3155-023, female contact size 20. The connector operating temperature shall be limited to the maximum operating temperature indicated in the contact product standards

39、. 10 Filler plugs See EN 4008-003. 11 Tools The tools for crimping and the insertion and extraction tools for removable contacts are given in the product standards. 12 Marking See EN 3218-001. 13 Assembly and wiring instructions See EN 3197. blankBS EN BSI389 Chiswick High RoadLondonW4 4AL3218-002:2

40、006BSI British Standards InstitutionBSI is the independent national body responsible for preparing British Standards. It presents the UK view on standards in Europe and at the international level. It is incorporated by Royal Charter.RevisionsBritish Standards are updated by amendment or revision. Us

41、ers of British Standards should make sure that they possess the latest amendments or editions.It is the constant aim of BSI to improve the quality of our products and services. We would be grateful if anyone finding an inaccuracy or ambiguity while using this British Standard would inform the Secret

42、ary of the technical committee responsible, the identity of which can be found on the inside front cover. Tel: +44 (0)20 8996 9000. Fax: +44 (0)20 8996 7400.BSI offers members an individual updating service called PLUS which ensures that subscribers automatically receive the latest editions of stand

43、ards.Buying standardsOrders for all BSI, international and foreign standards publications should be addressed to Customer Services. Tel: +44 (0)20 8996 9001. Fax: +44 (0)20 8996 7001. Email: ordersbsi-. Standards are also available from the BSI website at http:/www.bsi-.In response to orders for int

44、ernational standards, it is BSI policy to supply the BSI implementation of those that have been published as British Standards, unless otherwise requested.Information on standardsBSI provides a wide range of information on national, European and international standards through its Library and its Te

45、chnical Help to Exporters Service. Various BSI electronic information services are also available which give details on all its products and services. Contact the Information Centre. Tel: +44 (0)20 8996 7111. Fax: +44 (0)20 8996 7048. Email: infobsi-.Subscribing members of BSI are kept up to date wi

46、th standards developments and receive substantial discounts on the purchase price of standards. For details of these and other benefits contact Membership Administration. Tel: +44 (0)20 8996 7002. Fax: +44 (0)20 8996 7001. Email: membershipbsi-.Information regarding online access to British Standard

47、s via British Standards Online can be found at http:/www.bsi- information about BSI is available on the BSI website at http:/www.bsi-.CopyrightCopyright subsists in all BSI publications. BSI also holds the copyright, in the UK, of the publications of the international standardization bodies. Except

48、as permitted under the Copyright, Designs and Patents Act 1988 no extract may be reproduced, stored in a retrieval system or transmitted in any form or by any means electronic, photocopying, recording or otherwise without prior written permission from BSI.This does not preclude the free use, in the

49、course of implementing the standard, of necessary details such as symbols, and size, type or grade designations. If these details are to be used for any other purpose than implementation then the prior written permission of BSI must be obtained.Details and advice can be obtained from the Copyright & Licensing Manager. Tel: +44 (0)20 8996