BS EN 2859-2006 Aerospace series - Bolts normal hexagonal head close tolerance normal shank short thread in alloy steel cadmium plated - Classification 1100 MPa (at ambient tempera.pdf

《BS EN 2859-2006 Aerospace series - Bolts normal hexagonal head close tolerance normal shank short thread in alloy steel cadmium plated - Classification 1100 MPa (at ambient tempera.pdf》由会员分享，可在线阅读，更多相关《BS EN 2859-2006 Aerospace series - Bolts normal hexagonal head close tolerance normal shank short thread in alloy steel cadmium plated - Classification 1100 MPa (at ambient tempera.pdf（14页珍藏版）》请在麦多课文档分享上搜索。

1、BRITISH STANDARD AEROSPACE SERIESBS EN2859:2006Bolts, normal hexagonal head, close tolerance normal shank, short thread, in alloy steel, cadmium plated, metric series Classification: 1 100 MPa (at ambient temperature)/235 CThe European Standard EN 2859:2006 has the status of a British StandardICS 49

2、.030.20g49g50g3g38g50g51g60g44g49g42g3g58g44g55g43g50g56g55g3g37g54g44g3g51g40g53g48g44g54g54g44g50g49g3g40g59g38g40g51g55g3g36g54g3g51g40g53g48g44g55g55g40g39g3g37g60g3g38g50g51g60g53g44g42g43g55g3g47g36g58Licensed Copy: Wang Bin, na, Wed Sep 13 07:43:54 BST 2006, Uncontrolled Copy, (c) BSIBS EN 28

3、59:2006This British Standard was published under the authority of the Standards Policy and Strategy Committee on 31 August 2006 BSI 2006ISBN 0 580 48514 5National forewordThis British Standard is the official English language version of EN 2859:2006. It supersedes BS EN 2859:1995 which is withdrawn.

4、The UK participation in its preparation was entrusted to Technical Committee ACE/12, Aerospace fasteners and fastening systems, which has the responsibility to: A list of organizations represented on this committee can be obtained on request to its secretary.Cross-referencesThe British Standards whi

5、ch implement international or European publications referred to in this document may be found in the BSI Catalogue under the section entitled “International Standards Correspondence Index”, or by using the “Search” facility of the BSI Electronic Catalogue or of British Standards Online.This publicat

6、ion does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. aid enquirers to understand the text; present to the responsible international/

7、European committee any enquiries on the interpretation, or proposals for change, and keep UK interests informed; monitor related international and European developments and promulgate them in the UK.Summary of pagesThis document comprises a front cover, an inside front cover, the EN title page, page

8、s 2 to 10, an inside back cover and a back cover.The BSI copyright notice displayed in this document indicates when the document was last issued.Amendments issued since publicationAmd. No. Date CommentsLicensed Copy: Wang Bin, na, Wed Sep 13 07:43:54 BST 2006, Uncontrolled Copy, (c) BSIEUROPEAN STAN

9、DARD NORME EUROPENNE EUROPISCHE NORM EN 2859 July 2006 ICS 49.030.20 Supersedes EN 2859:1995 English Version Aerospace series - Bolts, normal hexagonal head, close tolerance normal shank, short thread, in alloy steel, cadmium plated, metric series - Classification: 1 100 MPa (at ambient temperature)

10、 / 235 C Srie arospatiale - Vis tte hexagonale normale, ft normal tolrance serre, filetage court, en acier alli, cadmies - Classification : 1 100 MPa ( temprature ambiante) / 235 C Luft- und Raumfahrt - Sechskant-Paschrauben, kurzes Gewinde, aus legiertem Stahl, verkadmet - Klasse: 1 100 MPa (bei Ra

11、umtemperatur) / 235 C This European Standard was approved by CEN on 13 January 2006. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists a

12、nd bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsib

13、ility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland,

14、Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: rue de Stassart, 36

15、B-1050 Brussels 2006 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 2859:2006: ELicensed Copy: Wang Bin, na, Wed Sep 13 07:43:54 BST 2006, Uncontrolled Copy, (c) BSI2 Contents Page Foreword3 1 Scope 4 2 Normative references 4 3 Re

16、quired characteristics.5 4 Designation 9 5 Marking .9 6 Technical specification 10 7 Oversized bolts . 10 EN 2859:2006Licensed Copy: Wang Bin, na, Wed Sep 13 07:43:54 BST 2006, Uncontrolled Copy, (c) BSI3 Foreword This European Standard (EN 2859:2006) has been prepared by the European Association of

17、 Aerospace Manufacturers - Standardization (AECMA-STAN). After enquiries and votes carried out in accordance with the rules of this Association, this Standard has received the approval of the National Associations and the Official Services of the member countries of AECMA, prior to its presentation

18、to CEN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by January 2007, and conflicting national standards shall be withdrawn at the latest by January 2007. Attention is drawn to the possibility tha

19、t some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. This document supersedes EN 2859:1995. According to the CEN/CENELEC Internal Regulations, the national standards organizations

20、of the following countries are bound to implement this European Standard: Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Sl

21、ovenia, Spain, Sweden, Switzerland and the United Kingdom. EN 2859:2006Licensed Copy: Wang Bin, na, Wed Sep 13 07:43:54 BST 2006, Uncontrolled Copy, (c) BSI4 1 Scope This standard specifies the characteristics of bolts, normal hexagonal head, close tolerance normal shank, short thread, in alloy stee

22、l, cadmium plated, metric series. Classification: 1 100 MPa 1) / 235 C 2). 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referen

23、ced document (including any amendments) applies. ISO 3193, Aerospace Bolts, normal hexagonal head, normal shank, short or medium length MJ threads, metallic material, coated or uncoated, strength classes less than or equal to 1 100 MPa Dimensions. ISO 3353-1, Aerospace Lead and runout threads Part 1

24、: Rolled external threads. ISO 5855-2, Aerospace MJ threads Part 2: Limit dimensions for bolts and nuts. ISO 7689, Aerospace Alloy steel bolts with strength classification 1 100 MPa and MJ threads Procurement specification. ISO 7913, Aerospace Bolts and screws, metric Tolerances of form and position

25、. EN 2133, Aerospace series Cadmium plating of steels with specified tensile strength 1 450 MPa, copper, copper alloys and nickel alloys. EN 2424, Aerospace series Marking of aerospace products. EN 4016, Aerospace series Oversized bolts. 3)EN 9100, Aerospace series Quality management systems Require

26、ments (based on ISO 9001:2000) and Quality systems Model for quality assurance in design, development, production, installation and servicing (based on ISO 9001:1994). EN 9133, Aerospace series Quality management systems Qualification Procedure for aerospace standard parts. TR 3775, Aerospace series

27、 Bolts and pins Materials. 4)1) Minimum tensile strength of the material at ambient temperature. 2) Maximum temperature that the bolt can withstand without continuous change in its original characteristics, after return to ambient temperature. The maximum temperature is determined by the surface tre

28、atment. 3) Published as ASD Prestandard at the date of publication of this standard. 4) Published as ASD Technical Report at the date of publication of this standard. EN 2859:2006Licensed Copy: Wang Bin, na, Wed Sep 13 07:43:54 BST 2006, Uncontrolled Copy, (c) BSI5 3 Required characteristics 3.1 Con

29、figuration Dimensions Masses See Figure 1 and Table 1. Dimensions and tolerances are: in conformity with ISO 3193, expressed in millimetres and apply after surface treatment. Details of form not stated are left to the manufacturers discretion. 3.2 Tolerances of form and position ISO 7913 3.3 Materia

30、ls TR 3775 (alloy steel, strength class 1 100 MPa). 3.4 Surface treatment EN 2133, 6 m to 10 m, on all surfaces which can be contacted by a 20 mm diameter ball. On all other surfaces, a continuous cadmium plating shall be present, but no value is specified. Black colour option: code B (EN 2133, exce

31、pt for corrosion resistance requirement). EN 2859:2006Licensed Copy: Wang Bin, na, Wed Sep 13 07:43:54 BST 2006, Uncontrolled Copy, (c) BSIValuesin micrometres apply prior to surface treatment. Break sharp edges 0,1 to 0,4. Key1 Two holes diameter D6(optional) 2 Continuous surface 3 One hole diamete

32、r D7(optional) 4 Thread 5 Marking 6 Conforms to ISO 3353-1 Figure 1 3,2 0,83,2 EN 2859:20066Licensed Copy: Wang Bin, na, Wed Sep 13 07:43:54 BST 2006, Uncontrolled Copy, (c) BSITable 1 D1D2D3D4 bD5D6D7EFGDiameter code Threadanom.Tol. min. 0 0,5 min. nom. Tol. H13 H13 min. max. min. 0 0,3 030 MJ3x0,5

33、 - 4h6h 3 0,0060,0315,5 5,4 2,3 6,5 0,4 2 040 MJ4x0,7 - 4h6h 4 6,4 6,4 3 0 0,5 1,1 7,6 2,5 050 MJ5x0,8 - 4h6h 5 7,4 5,25 7,4 3,4 1 8,7 3 060 MJ6x1 - 4h6h 6 0,0100,0359,4 6,25 9,3 4,2 1,5 10,9 3,5 070 MJ7x1 - 4h6h 7 10,3 7,25 10,2 5,2 12 4 080 MJ8x1 - 4h6h 8 12,3 8,25 12,2 6,2 1,4 1,9 14,3 0,5 0,2 4,

34、5 100 MJ10x1,25 - 4h6h 10 0,0130,03816,3 10,25 16 7,9 18,9 5 120 MJ12x1,25 - 4h6h 12 18,3 12,25 18 9,8 2,4 21,1 6 140 MJ14x1,5 - 4h6h14 21,3 14,25 21 11,5 24,5 7 160 MJ16x1,5 - 4h6h16 23,3 16,25 23 13,5 3 26,8 8 180 MJ18x1,5 - 4h6h18 0,0160,04126,3 18,25 26 15,5 30,2 9 200 MJ20x1,5 - 4h6h20 0,0200,0

35、4529,3 20,25 29 17,5 0,5 1,6 3,8 33,6 0,6 0,3 10 continuedEN 2859:20067Licensed Copy: Wang Bin, na, Wed Sep 13 07:43:54 BST 2006, Uncontrolled Copy, (c) BSITable 1 (concluded)J L10,2c dNRMasseDiameter code H nom. Tol. KCode nom. L2L30 0,3 nom. Tol. f g 030 6 002 to 030 2 to 30 6 0,87 0,06 040 7 002

36、to 040 2 to 40 7,5 5 0,4 1,66 0,10 050 1,35 8 h12 3,25 003 to 050 3 to 50 9 6 2 0,5 2,91 0,15 060 1,6 10 4,1 003 to 060 3 to 60 10 2,3 5,44 0,22 070 1,85 11 4,5 004 to 070 4 to 70 11 7 2,7 7,45 0,30 080 2,1 13 5,35 004 to 080 4 to 80 11,5 7,5 3 0,7 11,22 0,39 100 2,35 17 7,1 005 to 100 5 to 100 14,5

37、 9 3,4 0,8 0 0,221,78 0,62 120 2,85 19 7,9 006 to 120 6 to 120 16 10 4 0,9 34,82 0,89 140 3,35 22 9,2 007 to 140 7 to 140 19 12 4,7 53,61 1,21 160 3,85 24 10,05 008 to 160 8 to 160 20,5 12,5 5,4 1,1 78,40 1,58 180 4,35 27 11,3 009 to 180 9 to 180 22,5 14,5 6 110,48 2,00 200 4,85 30 h13 12,6 010 to 2

38、00 10 to 200 24,5 15 6,7 1,3 0 0,3151,14 2,47 aIn accordance with ISO 5855-2, except the thread major diameter “dmax.“ which shall be equal to D1min. 0,025. bD4max. shall be less than J. cIncrements: 1 for L130 2 for 30 100 dIf greater lengthsare required, theyshall be chosen using the above increme

39、nts. The length code corresponds to length L1, completed byone or two zeros to the left, where necessary, to obtain a three digit code. eApproximate values (kg/1 000 pieces), calculated on the basis of 7,85 kg/dm3, for information purposes only.Theyapplyto bolts without holes. fValue for head and fi

40、rst L4gIncrease for each additional millimetre of L4. EN 2859:20068Licensed Copy: Wang Bin, na, Wed Sep 13 07:43:54 BST 2006, Uncontrolled Copy, (c) BSI9 4 Designation EXAMPLE Description block BOLT Identity block EN2859D080060B Number of this standard Hole code (see Table 2) Diameter code (see Tabl

41、e 1) Length code (see Table 1) Black colour code (see 3.4) NOTE If necessary, the code I9005 shall be placed between the description block and the identity block. Table 2 Holes Code Lockwire H Split pin D Lockwire and split pin C No hole (hyphen) 5 Marking See Table 3 and Figure 1, indented. Table 3

42、 Diameter code EN 2424 Style 030 and 040 N 050 to 200 C + MJ EN 2859:2006Licensed Copy: Wang Bin, na, Wed Sep 13 07:43:54 BST 2006, Uncontrolled Copy, (c) BSI10 6 Technical specification ISO 7689, with the following modifications: Approval of manufacturers: see EN 9100; Qualification of bolts: see E

43、N 9133; Requirement deleted: Cold rolling; Double shear strength; Tension fatigue strength; Head to shank fillet work effect. 7 Oversized bolts See EN 4016. EN 2859:2006Licensed Copy: Wang Bin, na, Wed Sep 13 07:43:54 BST 2006, Uncontrolled Copy, (c) BSIblankLicensed Copy: Wang Bin, na, Wed Sep 13 0

44、7:43:54 BST 2006, Uncontrolled Copy, (c) BSIBS EN 2859:2006BSI389 Chiswick High RoadLondonW4 4ALBSI British Standards InstitutionBSI is the independent national body responsible for preparing British Standards. It presents the UK view on standards in Europe and at the international level. It is inco

45、rporated by Royal Charter.RevisionsBritish Standards are updated by amendment or revision. Users of British Standards should make sure that they possess the latest amendments or editions.It is the constant aim of BSI to improve the quality of our products and services. We would be grateful if anyone

46、 finding an inaccuracy or ambiguity while using this British Standard would inform the Secretary of the technical committee responsible, the identity of which can be found on the inside front cover. Tel: +44 (0)20 8996 9000. Fax: +44 (0)20 8996 7400.BSI offers members an individual updating service

47、called PLUS which ensures that subscribers automatically receive the latest editions of standards.Buying standardsOrders for all BSI, international and foreign standards publications should be addressed to Customer Services. Tel: +44 (0)20 8996 9001. Fax: +44 (0)20 8996 7001. Email: ordersbsi-. Stan

48、dards are also available from the BSI website at http:/www.bsi-.In response to orders for international standards, it is BSI policy to supply the BSI implementation of those that have been published as British Standards, unless otherwise requested.Information on standardsBSI provides a wide range of

49、 information on national, European and international standards through its Library and its Technical Help to Exporters Service. Various BSI electronic information services are also available which give details on all its products and services. Contact the Information Centre. Tel: +44 (0)20 8996 7111. Fax: +44 (0)20 8996 7048. Email: infobsi-.Subscribing members of BSI are kept up to date with standards developments a