BS EN 2665-003-1999 Circuit breakers three-pole temperature compensated rated currents 20 A to 50 A Metric thread terminals - Product standard《额定电流为20A至50A的温度补偿的三极电路断路器 米制螺纹接头 产品标准.pdf

《BS EN 2665-003-1999 Circuit breakers three-pole temperature compensated rated currents 20 A to 50 A Metric thread terminals - Product standard《额定电流为20A至50A的温度补偿的三极电路断路器 米制螺纹接头 产品标准.pdf》由会员分享，可在线阅读，更多相关《BS EN 2665-003-1999 Circuit breakers three-pole temperature compensated rated currents 20 A to 50 A Metric thread terminals - Product standard《额定电流为20A至50A的温度补偿的三极电路断路器 米制螺纹接头 产品标准.pdf（12页珍藏版）》请在麦多课文档分享上搜索。

1、BRITISH STANDARD AEROSPACE SERIES BS EN 2665-003:1999 Circuit breakers, three-pole, temperature compensated, rated currents20A to50A Part003: Metric thread terminals Product standard The European Standard EN2665-003:1999 has the status of a BritishStandard ICS49.060BSEN2665-003:1999 This BritishStan

2、dard, having been prepared under the directionof the Engineering SectorCommittee, was publishedunder the authorityofthe Standards Committee and comesinto effect on 15August1999 BSI03-2000 ISBN 0 580 32852 X National foreword This BritishStandard is the English language version of EN2665-003:1999. To

3、gether with the other parts of BS EN2665 and BS EN3774, in all its parts, it supersedes BS G179-2:1966 which is withdrawn. The UK participation in its preparation was entrusted by Technical Committee ACE/6, Aerospace avionic, electrical and fibre optic technology, to Subcommittee ACE/6/5, Aerospace

4、Protection of electrical systems, which has the responsibility to: aid enquirers to understand the text; present to the responsible European committee any enquiries on the interpretation, or proposals for change, and keep the UK interests informed; monitor related international and European developm

5、ents and promulgate them in the UK. A list of organizations represented on this subcommittee can be obtained on request to its secretary. Cross-references The BritishStandards which implement international or European publications referred to in this document may be found in the BSI Standards Catalo

6、gue under the section entitled “International Standards Correspondence Index”, or by using the “Find” facility of the BSI Standards Electronic Catalogue. A British Standard does not purport to include all the necessary provisions of a contract. Users of British Standards are responsible for their co

7、rrect application. Compliance with a British Standard does not of itself confer immunity from legal obligations. Summary of pages This document comprises a front cover, an inside front cover, pagesi andii, theEN title page, pages2 to6 and a back cover. This standard has been updated (see copyright d

8、ate) and may have had amendments incorporated. This will be indicated in the amendment table on the inside front cover. Amendments issued since publication Amd. No. Date CommentsBSEN2665-003:1999 BSI 03-2000 i Contents Page National foreword Inside front cover Foreword 2 Text of EN2665-003 3ii blank

9、EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN2665-003 June1999 ICS49.060 English version Aerospace series Circuit breakers, three-pole, temperature compensated, rated currents20A to50A Part003: Metric thread terminals Product standard Srie arospatiale Disjoncteurs tripolaires compenss en temp

10、rature, intensits nominales20A 50A Partie003: Bornes filetage mtrique Norme de produit Luft- und Raumfahrt Schutzschalter, dreipolig, temperaturkompensiert, Nennstrme von20A bis50A Teil003: Metrisches Klemmengewinde Produktnorm This European Standard was approved by CEN on4September1998. CEN members

11、 are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application

12、to the Central Secretariat or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same

13、 status as the official versions. CEN members are the national standards bodies of Austria, Belgium, CzechRepublic, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and UnitedKingdom. CEN European Committee for

14、Standardization Comit Europen de Normalisation Europisches Komitee fr Normung Central Secretariat: rue de Stassart 36, B-1050 Brussels 1999 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN2665-3:1999EEN2665-003:1999 BSI 03-2000 2 Fo

15、reword This European Standard has been prepared by the European Association of Aerospace Manufacturers (AECMA). After inquiries and votes carried out in accordance with the rules of this Association, this Standard has received the approval of the National Associations and the Official Services of th

16、e member countries of AECMA, prior to its presentation to CEN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by December1999, and conflicting national standards shall be withdrawn at the latest by

17、December1999. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, CzechRepublic, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands

18、, Norway, Portugal, Spain, Sweden, Switzerland and the UnitedKingdom. Contents Page Foreword 2 1 Scope 3 2 Normative references 3 3 Definitions 3 4 Required characteristics 3 4.1 Short-circuit performance 3 4.2 Dimensions, mounting, electrical connections 4 4.3 Fasteners 5 4.4 Mass 5 5 Designation 6

19、 6 Marking 6 Figure 1 Circuit breaker 4 Figure 2 Panel cut-out (panel thickness1,5to3) 4 Figure 3 Electrical connection 4 Figure 4 Screw 5 Figure 5 Washer 5 Figure 6 Attachment nut 5 Figure 7 Lock washer 5 Table 1 6EN2665-003:1999 BSI 03-2000 3 1 Scope This standard specifies the required characteri

20、stics for three-pole, temperature compensated circuit breakers, rated currents from20A to50A, metric thread terminals, for use in aircraft electrical systems, at temperatures between55 C and90 C and at a maximum altitude of Z=15000m. It shall be used together with EN2665-001. These circuit breakers

21、are intended for use in aircraft with electrical supplies in accordance with EN2282. 2 Normative references This European Standard incorporates by dated or undated reference provisions from other publications. These normative references are cited at the appropriate places in the text and the publica

22、tions are listed hereafter. For dated references, subsequent amendments to or revisions of any of these publications apply to this European Standard only when incorporated in it by amendment or revision. For undated references the latest edition of the publication referred to applies. ISO965-2, ISO

23、general purpose metric screw threads Tolerances Part2: Limits of sizes for general purpose bolt and nut threads Medium quality. ISO1190-1, Copper and copper alloys Code of designation Part1: Designation of materials. ISO7045, Cross-recessed pan head screws Product grade A. EN2282, Aerospace series C

24、haracteristics of aircraft electrical supplies. EN2350, Aerospace series Circuit breakers Technical specification. EN2665-001, Aerospace series Circuit breakers, three-pole, temperature compensated, rated currents20A to50A Part001: Technical specification. 3 Definitions For the purposes of this stan

25、dard, the definitions given in EN2350 apply. 4 Required characteristics 4.1 Short-circuit performance Test current:1500A prospective,0,8k cos: 1 Number of CO/OCO tests:1CO+2OCOEN2665-003:1999 4 BSI 03-2000 4.2 Dimensions, mounting, electrical connections SeeFigure 1, Figure 2 and Figure 3. Dimension

26、s and tolerances are in millimetres. Figure 1 Circuit breaker Figure 2 Panel cut-out (panel thickness1,5to3) Figure 3 Electrical connectionEN2665-003:1999 BSI 03-2000 5 4.3 Fasteners Dimensions and tolerances are in millimetres. 4.3.1 For electrical connections SeeFigure 4 and Figure 5. 4.3.2 For mo

27、unting SeeFigure 6 and Figure 7. 4.4 Mass Maximum mass:175g (provisioning code D) Screw: ISO7045M4 64,8Z Material: steel Protection: zinc plated, passivated, bright Two wave corrugated washer Material: CuBe1,9 to ISO1190-1 Hardness:350HV to410HV Figure 4 Screw Figure 5 Washer Thread to ISO965-2 Mate

28、rial: aluminium alloy2017 a Protection: black sulphur anodized M12DIC lock washer (internal serrated teeth) Material: steel Hardness:400HV to480HV Protection: black zinc dichromate a Designation of “ALUMINUM ASSOCIATION” Figure 6 Attachment nut Figure 7 Lock washerEN2665-003:1999 6 BSI 03-2000 5 Des

29、ignation EXAMPLE: NOTEIf necessary, the code I9005 shall be placed between the description block and the identity block. Table 1 6 Marking SeeEN2350. The provisioning code shall not be marked on the product. Code Fasteners for terminals Fasteners for mounting None Fitted Supplied separately None Fit

30、ted Supplied separately A X X B X X C X X D X X E X X blankBS EN 2665-003:1999 BSI 389 Chiswick High Road London W4 4AL BSIBritishStandardsInstitution BSI is the independent national body responsible for preparing BritishStandards. It presents the UK view on standards in Europe and at the internatio

31、nal level. It is incorporated by Royal Charter. Revisions BritishStandards are updated by amendment or revision. Users of BritishStandards should make sure that they possess the latest amendments or editions. It is the constant aim of BSI to improve the quality of our products and services. We would

32、 be grateful if anyone finding an inaccuracy or ambiguity while using this BritishStandard would inform the Secretary of the technical committee responsible, the identity of which can be found on the inside front cover. Tel:02089969000. Fax:02089967400. BSI offers members an individual updating serv

33、ice called PLUS which ensures that subscribers automatically receive the latest editions of standards. Buying standards Orders for all BSI, international and foreign standards publications should be addressed to Customer Services. Tel:02089969001. Fax:02089967001. In response to orders for internati

34、onal standards, it is BSI policy to supply the BSI implementation of those that have been published as BritishStandards, unless otherwise requested. Information on standards BSI provides a wide range of information on national, European and international standards through its Library and its Technic

35、al Help to Exporters Service. Various BSI electronic information services are also available which give details on all its products and services. Contact the Information Centre. Tel:02089967111. Fax:02089967048. Subscribing members of BSI are kept up to date with standards developments and receive s

36、ubstantial discounts on the purchase price of standards. For details of these and other benefits contact Membership Administration. Tel:02089967002. Fax:02089967001. Copyright Copyright subsists in all BSI publications. BSI also holds the copyright, in the UK, of the publications of the internationa

37、l standardization bodies. Except as permitted under the Copyright, Designs and Patents Act 1988 no extract may be reproduced, stored in a retrieval system or transmitted in any form or by any means electronic, photocopying, recording or otherwise without prior written permission from BSI. This does

38、not preclude the free use, in the course of implementing the standard, of necessary details such as symbols, and size, type or grade designations. If these details are to be used for any other purpose than implementation then the prior written permission of BSI must be obtained. If permission is granted, the terms may include royalty payments or a licensing agreement. Details and advice can be obtained from the Copyright Manager. Tel:02089967070.