BS EN 2591-424-2001 Elements of electrical and optical connection - Test methods - Stripping force solderless wrapped connections《电气和光学连接元件 试验方法 无钎焊缠绕连接的剥脱力》.pdf

《BS EN 2591-424-2001 Elements of electrical and optical connection - Test methods - Stripping force solderless wrapped connections《电气和光学连接元件 试验方法 无钎焊缠绕连接的剥脱力》.pdf》由会员分享，可在线阅读，更多相关《BS EN 2591-424-2001 Elements of electrical and optical connection - Test methods - Stripping force solderless wrapped connections《电气和光学连接元件 试验方法 无钎焊缠绕连接的剥脱力》.pdf（8页珍藏版）》请在麦多课文档分享上搜索。

1、BRITISH STANDARD AEROSPACE SERIES BS EN 2591-424:2001 Elements of electrical and optical connection Test methods Part 424: Stripping force, solderless wrapped connections The European Standard EN 2591-424:2001 has the status of a British Standard ICS 49.060 NO COPYING WITHOUT BSI PERMISSION EXCEPT A

2、S PERMITTED BY COPYRIGHT LAWBS EN 2591-424:2001 This British Standard, having been prepared under the direction of the Engineering Sector Policy and Strategy Committee, was published under the authority of the Standards Policy and Strategy Committee on 13 December 2001 BSI 13 December 2001 ISBN 0 58

3、0 38116 1 National foreword This British Standard is the official English language version of EN 2591-424:2001. The UK participation in its preparation was entrusted by Technical Committee ACE/6, Aerospace Avionic Electrical and Fibre Optic Technology, to Subcommittee ACE /6/3, Aerospace - Connector

4、s, which has the responsibility to: A list of organizations represented on this subcommittee can be obtained on request to its secretary. Cross-references The British Standards which implement international or European publications referred to in this document may be found in the BSI Standards Catal

5、ogue under the section entitled “International Standards Correspondence Index”, or by using the “Find” facility of the BSI Standards Electronic Catalogue. A British Standard does not purport to include all the necessary provisions of a contract. Users of British Standards are responsible for their c

6、orrect application. Compliance with a British Standard does not of itself confer immunity from legal obligations. aid enquirers to understand the text; present to the responsible international/European committee any enquiries on the interpretation, or proposals for change, and keep the UK interests

7、informed; monitor related international and European developments and promulgate them in the UK. Summary of pages This document comprises a front cover, an inside front cover, the EN title page, pages 2 to 4, an inside back cover and a back cover. The BSI copyright date displayed in this document in

8、dicates when the document was last issued. Amendments issued since publication Amd. No. Date CommentsEUROPEANSTANDARD NORMEEUROPENNE EUROPISCHENORM EN2591424 November2001 ICS49.060 Englishversion AerospaceseriesElementsofelectricalandopticalconnection TestmethodsPart424:Strippingforce,solderlesswrap

9、ped connections SriearospatialeOrganesdeconnexionlectriqueet optiqueMthodesdessaisPartie424:Force darrachementdesconnexionsenroulessansbrasure LuftundRaumfahrtElektrischeundoptische VerbindungselementePrfverfahrenTeil424: AbziehkraftvonltfreienWickelverbindungen ThisEuropeanStandardwasapprovedbyCENo

10、n4June2001. CENmembersareboundtocomplywiththeCEN/CENELECInternalRegulationswhichstipulatetheconditionsforgivingthisEurope an Standardthestatusofanationalstandardwithoutanyalteration.Uptodatelistsandbibliographicalreferencesconcernings uchnational standardsmaybeobtainedonapplicationtotheManagementCen

11、treortoanyCENmember. ThisEuropeanStandardexistsinthreeofficialversions(English,French,German).Aversioninanyotherlanguagemadebytra nslation undertheresponsibilityofaCENmemberintoitsownlanguageandnotifiedtotheManagementCentrehasthesamestatusasthe official versions. CENmembersarethenationalstandardsbod

12、iesofAustria,Belgium,CzechRepublic,Denmark,Finland,France,Germany,Greece, Iceland,Ireland,Italy,Luxembourg,Netherlands,Norway,Portugal,Spain,Sweden,SwitzerlandandUnitedKingdom. EUROPEANCOMMITTEEFORSTANDARDIZATION COMITEUROPENDENORMALISATION EUROPISCHESKOMITEEFRNORMUNG ManagementCentre:ruedeStassart,

13、36B1050Brussels 2001CEN Allrightsofexploitationinanyformandbyanymeansreserved worldwideforCENnationalMembers. Ref.No.EN2591424:2001EEN2591424:2001(E) 2 Foreword ThisEuropeanStandardhasbeenpreparedbytheEuropeanAssociationofAerospaceManufacturers (AECMA). Afterinquiriesandvotescarriedoutinaccordancewi

14、ththerulesofthisAssociation,thisStandardhas receivedtheapprovaloftheNationalAssociationsandtheOfficialServicesofthemembercountriesof AECMA,priortoitspresentationtoCEN. ThisEuropeanStandardshallbegiventhestatusofanationalstandard,eitherbypublicationofanidentical textorbyendorsement,atthelatestbyMay20

15、02,andconflictingnationalstandardsshallbewithdrawnat thelatestbyMay2002. AccordingtotheCEN/CENELECInternalRegulations,thenationalstandardsorganizationsofthefollowing countriesareboundtoimplementthisEuropeanStandard:Austria,Belgium,CzechRepublic,Denmark, Finland,France,Germany,Greece,Iceland,Ireland,

16、Italy,Luxembourg,Netherlands,Norway,Portugal, Spain,Sweden,SwitzerlandandtheUnitedKingdom.EN2591424:2001(E) 3 1 Scope Thisstandardspecifiesamethodofdeterminingthestrippingforceofsolderlesswrappedconnectionsused inelementsofelectricalandopticalconnection. ItshallbeusedtogetherwithEN2591100. 2 Normati

17、vereferences ThisEuropeanStandardincorporatesbydatedorundatedreferenceprovisionsfromotherpublications. Thesenormativereferencesarecitedattheappropriateplacesinthetextandthepublicationsarelisted hereafter.Fordatedreferences,subsequentamendmentstoorrevisionsofanyofthesepublicationsapplyto thisEuropean

18、Standardonlywhenincorporatedinitbyamendmentorrevision.Forundatedreferencesthe latesteditionofthepublicationreferredtoapplies. EN2591100 AerospaceseriesElementsofelectricalandopticalconnectionTestmethods Part100:General 1) EN2591101 AerospaceseriesElementsofelectricalandopticalconnectionTestmethods P

19、art101:Visualexamination EN2591102 AerospaceseriesElementsofelectricalandopticalconnectionTestmethods Part102:Examinationofdimensionsandmass 3 Preparationofspecimens 3.1 ThespecimensshallbeexaminedaccordingtoEN2591101andEN2591102andpreparedas specified. 3.2 Unlessspecifiedinthetechnicalspecification

20、,thefollowingdetailsshallbestated: typeofconductororcable; typeofcontact; wrappingtool; strippingtool; typeofwrapping,singleordouble; requirement. 1) PublishedasAECMAPrestandardatthedateofpublicationofthisstandardEN2591424:2001(E) 4 4 Apparatus Seefigure1. Theclearancebetweenthespecimensandthestripp

21、ingtoolshallnotexceed50%ofthediameterofthe wrappedconductororthecable. Key 1 Strippingforce 2 Solderlesswrapping,singleordouble 3 Conductororcable 4 Holdingdevice 5 Specimen 6 Forkedhook 7 Strippingtool Figure1Apparatus 5 Method 5.1 Procedure Thestrippingforceshallbeappliedalongthelongitudinalaxisof

22、thespecimenataconstantspeedbetween 25mm/minand50mm/min(seefigure1). Itshallbeapplieduntiltheturnshavemovedalongtheaxisofthespecimenoveradistanceequaltothe conductororcablediameter. Thenecessaryforceshallbemeasured. 5.2 Requirement Themeasuredforceshallnotbelessthanthespecifiedvalue.BS EN 2591-424:20

23、01 BSI 389 Chiswick High Road London W4 4AL BSI British Standards Institution BSI is the independent national body responsible for preparing British Standards. It presents the UK view on standards in Europe and at the international level. It is incorporated by Royal Charter. Revisions British Standa

24、rds are updated by amendment or revision. Users of British Standards should make sure that they possess the latest amendments or editions. It is the constant aim of BSI to improve the quality of our products and services. We would be grateful if anyone finding an inaccuracy or ambiguity while using

25、this British Standard would inform the Secretary of the technical committee responsible, the identity of which can be found on the inside front cover. Tel: +44 (0)20 8996 9000. Fax: +44 (0)20 8996 7400. BSI offers members an individual updating service called PLUS which ensures that subscribers auto

26、matically receive the latest editions of standards. Buying standards Orders for all BSI, international and foreign standards publications should be addressed to Customer Services. Tel: +44 (0)20 8996 9001. Fax: +44 (0)20 8996 7001. Email: ordersbsi-. Standards are also available from the BSI website

27、 at http:/www.bsi-. In response to orders for international standards, it is BSI policy to supply the BSI implementation of those that have been published as British Standards, unless otherwise requested. Information on standards BSI provides a wide range of information on national, European and int

28、ernational standards through its Library and its Technical Help to Exporters Service. Various BSI electronic information services are also available which give details on all its products and services. Contact the Information Centre. Tel: +44 (0)20 8996 7111. Fax: +44 (0)20 8996 7048. Email: infobsi

29、-. Subscribing members of BSI are kept up to date with standards developments and receive substantial discounts on the purchase price of standards. For details of these and other benefits contact Membership Administration. Tel: +44 (0)20 8996 7002. Fax: +44 (0)20 8996 7001. Email: membershipbsi-. In

30、formation regarding online access to British Standards via British Standards Online can be found at http:/www.bsi- Further information about BSI is available on the BSI website at http:/www.bsi-. Copyright Copyright subsists in all BSI publications. BSI also holds the copyright, in the UK, of the pu

31、blications of the international standardization bodies. Except as permitted under the Copyright, Designs and Patents Act 1988 no extract may be reproduced, stored in a retrieval system or transmitted in any form or by any means electronic, photocopying, recording or otherwise without prior written p

32、ermission from BSI. This does not preclude the free use, in the course of implementing the standard, of necessary details such as symbols, and size, type or grade designations. If these details are to be used for any other purpose than implementation then the prior written permission of BSI must be obtained. Details and advice can be obtained from the Copyright & Licensing Manager. Tel: +44 (0)20 8996 7070. Fax: +44 (0)20 8996 7553. Email: copyrightbsi-.