BS EN 2375-1992 Resin preimpregnated materials - Production batch sampling procedure《树脂预浸渍材料 生产批次抽样程序》.pdf

《BS EN 2375-1992 Resin preimpregnated materials - Production batch sampling procedure《树脂预浸渍材料 生产批次抽样程序》.pdf》由会员分享，可在线阅读，更多相关《BS EN 2375-1992 Resin preimpregnated materials - Production batch sampling procedure《树脂预浸渍材料 生产批次抽样程序》.pdf（10页珍藏版）》请在麦多课文档分享上搜索。

1、BRITISH STANDARD AEROSPACE SERIES BS EN 2375:1992 Resin preimpregnated materials Production batch sampling procedure The European Standard EN 2375:1992 has the status of a British StandardBSEN2375:1992 This British Standard, having been prepared under the directionof the Aerospace Standards Policy C

2、ommittee, waspublished under the authorityof the Standards Boardand comes into effect on 15June 1992 BSI 01-2000 The following BSI references relate to the work on this standard: Committee reference ACE/64 Draft for comment 90/70826 DC ISBN 0 580 20873 7 Cooperating organizations The European Commit

3、tee for Standardization (CEN), under whose supervision this European Standard was prepared, comprises the national standards organizations of the following countries: Austria Oesterreichisches Normungsinstitut Belgium Institut belge de normalisation Denmark Dansk Standardiseringsraad Finland Suomen

4、Standardisoimisliito, r.y. France Association franaise de normalisation Germany Deutsches Institut fr Normung e.V. Greece Hellenic Organization for Standardization Iceland Technological Institute of Iceland Ireland National Standards Authority of Ireland Italy Ente Nazionale Italiano di Unificazione

5、 Luxembourg Inspection du Travail et des Mines Netherlands Nederlands Normalisatie-instituut Norway Norges Standardiseringsforbund Portugal Instituto Portugus da Qualidade Spain Asociacin Espaola de Normalizacin y Certificacin Sweden Standardiseringskommissionen i Sverige Switzerland Association sui

6、sse de normalisation United Kingdom British Standards Institution Amendments issued since publication Amd. No. Date CommentsBSEN2375:1992 BSI 01-2000 i Contents Page Cooperating organizations Inside front cover National foreword ii Foreword 2 Text of EN 2375 3 National annex NA (informative) Committ

7、ees responsible Inside back coverBSEN2375:1992 ii BSI 01-2000 National foreword This British Standard has been prepared under the direction of the Aerospace Standards Policy Committee and is the English language version of EN2375:1992 Aerospace series Resin preimpregnated materials Production batch

8、sampling procedure published by the European Committee for Standardization (CEN). EN2375 was produced as a result of international discussion in which the UK took an active part. A British Standard does not purport to include all the necessary provisions of a contract. Users of British Standards are

9、 responsible for their correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. Summary of pages This document comprises a front cover, an inside front cover, pagesi andii, theEN title page, pages2 to4, an inside back cover and a back cover.

10、This standard has been updated (see copyright date) and may have had amendments incorporated. This will be indicated in the amendment table on the inside front cover.EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN2375 February 1992 UDC 678.6:667.621.633:620.1:629.7 Descriptors: Aircraft industr

11、y, reinforcing materials, preimpregnated products, resins, sampling, sampling tables English version Aerospace series Resin preimpregnated materials Production batch sampling procedure Srie arospatiale Matriaux primprgns de rsine Echantillonnage des lots de production Luft- und Raumfahrt Harzimprgni

12、erte Werkstoffe Verfahren zur Probenahme aus Fertigungslosen This European Standard was approved by CEN on1992-02-28. CEN members are bound to comply with of the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard withou

13、t any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language mad

14、e by translation under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy,

15、 Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and UnitedKingdom. CEN European Committee for Standardization Comit Europen de Normalisation Europisches Komitee fr Normung Central Secretariat: rue de Stassart 36, B-1050 Brussels CEN 1992 Copyright reserved to CEN members Ref.

16、No. EN 2375:1992 EEN2375:1992 BSI 01-2000 2 Foreword This European Standard has been prepared by the European Association of Aerospace Manufacturers (AECMA). After inquiries and votes carried out in accordance with the rules of this Association, this standard has successively received the approval o

17、f the National Associations and the Official Services of the member countries of AECMA, prior to its presentation to CEN. According to the Common CEN/CENELEC Rules, the following countries are bound to implement this European Standard: Austria, Belgium, Denmark, Finland, France, Germany, Greece, Ice

18、land, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and UnitedKingdom. Contents Page Foreword 2 1 Scope and field of application 3 2 Definitions 3 3 Numbering of rolls and sheets 3 4 Sampling 3EN2375:1992 BSI 01-2000 3 1 Scope and field of application 1.1 This

19、 standard specifies the method for sampling batches of resin impregnated fibre reinforcement used for aerospace applications. 1.2 The method is only applicable to impregnated woven fabrics and unidirectional reinforcement but is not suitable for impregnated rovings. 2 Definitions 2.1 production batc

20、h a production batch of impregnated material shall consist of rolls or sheets impregnated in a continuous manufacturing operation that conforms to a fixed manufacturing process and using a single mixture of resin ingredients and one type of reinforcement, simple or hybrid, of single source and const

21、ant over the whole of the batch 2.2 continuous manufacturing operation a continuous manufacturing operation is defined as one in which the process is not interrupted for more than24 continuous hours or by a different product run 2.3 elementary unit an elementary unit shall be a maximum of50kg. This

22、elementary unit may consist of one roll or a number of rolls or sheets, produced in a continuous operation, unless otherwise agreed between purchaser and manufacturer 3 Numbering of rolls and sheets Rolls and sheets shall be numbered in the sequence of production. 4 Sampling 4.1 The sampling plan sh

23、own below indicates the number of elementary units to be taken from a specific batch size. 4.2 The normal method shall be used unless the purchaser and manufacturer agree that the statistical method is required. 4.3 The sampling sequence shall be in accordance with the following: 2 elementary units

24、sampled: first and last. Above 2 elementary units sampled: first and every (to the lowest whole number). where: n = number of elementary units in the batch, x = number of elementary units to be sampled. Example: For a batch of 35 elementary units we take the first and everyi.e. every8th unit (to the

25、 lowest whole number), Then the elementary units to be sampled are: No. 1, No. 8, No. 16, No. 24 and No. 32. Number of elementary units in the batch Total of elementary units to be sampled Normal Statistical Up to 3 1 All 4 to 15 2 3 16 to 25 4 4 26 to 40 5 5 41 to 65 7 7 n x 1 - 35 5 1 -4 blankBSEN

26、2375:1992 BSI 01-2000 National annex NA (informative) Committees responsible The United Kingdom participation in the preparation of this European Standard was entrusted by the Aerospace Standards Policy Committee (ACE/-) to Technical Committee ACE/64 upon which the following bodies were represented:

27、 British Plastics Federation Ministry of Defence Society of British Aerospace Companies LimitedBS EN 2375:1992 BSI 389 Chiswick High Road London W4 4AL BSIBritishStandardsInstitution BSI is the independent national body responsible for preparing BritishStandards. It presents the UK view on standards

28、 in Europe and at the international level. It is incorporated by Royal Charter. Revisions BritishStandards are updated by amendment or revision. Users of BritishStandards should make sure that they possess the latest amendments or editions. It is the constant aim of BSI to improve the quality of our

29、 products and services. We would be grateful if anyone finding an inaccuracy or ambiguity while using this BritishStandard would inform the Secretary of the technical committee responsible, the identity of which can be found on the inside front cover. Tel:02089969000. Fax:02089967400. BSI offers mem

30、bers an individual updating service called PLUS which ensures that subscribers automatically receive the latest editions of standards. Buying standards Orders for all BSI, international and foreign standards publications should be addressed to Customer Services. Tel:02089969001. Fax:02089967001. In

31、response to orders for international standards, it is BSI policy to supply the BSI implementation of those that have been published as BritishStandards, unless otherwise requested. Information on standards BSI provides a wide range of information on national, European and international standards thr

32、ough its Library and its Technical Help to Exporters Service. Various BSI electronic information services are also available which give details on all its products and services. Contact the Information Centre. Tel:02089967111. Fax:02089967048. Subscribing members of BSI are kept up to date with stan

33、dards developments and receive substantial discounts on the purchase price of standards. For details of these and other benefits contact Membership Administration. Tel:02089967002. Fax:02089967001. Copyright Copyright subsists in all BSI publications. BSI also holds the copyright, in the UK, of the

34、publications of the international standardization bodies. Except as permitted under the Copyright, Designs and Patents Act 1988 no extract may be reproduced, stored in a retrieval system or transmitted in any form or by any means electronic, photocopying, recording or otherwise without prior written

35、 permission from BSI. This does not preclude the free use, in the course of implementing the standard, of necessary details such as symbols, and size, type or grade designations. If these details are to be used for any other purpose than implementation then the prior written permission of BSI must be obtained. If permission is granted, the terms may include royalty payments or a licensing agreement. Details and advice can be obtained from the Copyright Manager. Tel:02089967070.