BS EN 1780-3-2002 Aluminium and aluminium alloys - Designation of unalloyed and alloyed aluminium ingots for remelting master alloys and castings - Writing rules for chemical compo.pdf

《BS EN 1780-3-2002 Aluminium and aluminium alloys - Designation of unalloyed and alloyed aluminium ingots for remelting master alloys and castings - Writing rules for chemical compo.pdf》由会员分享，可在线阅读，更多相关《BS EN 1780-3-2002 Aluminium and aluminium alloys - Designation of unalloyed and alloyed aluminium ingots for remelting master alloys and castings - Writing rules for chemical compo.pdf（10页珍藏版）》请在麦多课文档分享上搜索。

1、BRITISH STANDARD BS EN 1780-3:2002 Aluminium and aluminium alloys Designation of alloyed aluminium ingots for remelting, master alloys and castings Part 3: Writing rules for chemical composition The European Standard EN 1780-3:2002 has the status of a British Standard ICS 77.150.10 BS EN 1780-3:2002

2、 This British Standard, having been prepared under the direction of the Engineering Sector Policy and Strategy Committee, was published under the authority of the Standards Policy and Strategy Committee on 30 October 2002 BSI 30 October 2002 ISBN 0 580 40657 1 National foreword This British Standard

3、 is the official English language version of EN 1780-3:2002. It supersedes BS EN 1780-3:1997 which is withdrawn. The UK participation in its preparation was entrusted to Technical Committee NFE/35, Light metals and their alloys, which has the responsibility to: A list of organizations represented on

4、 this committee can be obtained on request to its secretary. Cross-references The British Standards which implement international or European publications referred to in this document may be found in the BSI Catalogue under the section entitled “International Standards Correspondence Index”, or by u

5、sing the “Search” facility of the BSI Electronic Catalogue or of British Standards Online. This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. Compliance with a British Standard does not of itself confer immunity

6、 from legal obligations. aid enquirers to understand the text; present to the responsible international/European committee any enquiries on the interpretation, or proposals for change, and keep the UK interests informed; monitor related international and European developments and promulgate them in

7、the UK. Summary of pages This document comprises a front cover, an inside front cover, the EN title page, pages 2 to 6, an inside back cover and a back cover. The BSI copyright date displayed in this document indicates when the document was last issued. Amendments issued since publication Amd. No. D

8、ate CommentsEUROPEANSTANDARD NORMEEUROPENNE EUROPISCHENORM EN17803 October2002 ICS77.150.10 SupersedesEN17803:2002 Englishversion AluminiumandaluminiumalloysDesignationofalloyed aluminiumingotsforremelting,masteralloysandcastingsPart 3:Writingrulesforchemicalcomposition Aluminiumetalliagesdaluminium

9、Systmede dsignationapplicableauxlingotspourrefusionen aluminiumalli,auxalliagesmresetauxproduitsmouls Partie3:Rglesdcriturepourlacompositionchimique AluminiumundAluminiumlegierungenBezeichnungvon legiertemAluminiuminMasseln,Vorlegierungenund GussstckenTeil3:Schreibregelnfrdiechemische Zusammensetzun

10、g ThisEuropeanStandardwasapprovedbyCENon2September2002. CENmembersareboundtocomplywiththeCEN/CENELECInternalRegulationswhichstipulatetheconditionsforgivingthisEurope an Standardthestatusofanationalstandardwithoutanyalteration.Uptodatelistsandbibliographicalreferencesconcernings uchnational standards

11、maybeobtainedonapplicationtotheManagementCentreortoanyCENmember. ThisEuropeanStandardexistsinthreeofficialversions(English,French,German).Aversioninanyotherlanguagemadebytra nslation undertheresponsibilityofaCENmemberintoitsownlanguageandnotifiedtotheManagementCentrehasthesamestatusasthe official ve

12、rsions. CENmembersarethenationalstandardsbodiesofAustria,Belgium,CzechRepublic,Denmark,Finland,France,Germany,Greece, Iceland,Ireland,Italy,Luxembourg,Malta,Netherlands,Norway,Portugal,Spain,Sweden,SwitzerlandandUnitedKingdom. EUROPEANCOMMITTEEFORSTANDARDIZATION COMITEUROPENDENORMALISATION EUROPISCH

13、ESKOMITEEFRNORMUNG ManagementCentre:ruedeStassart,36B1050Brussels 2002CEN Allrightsofexploitationinanyformandbyanymeansreserved worldwideforCENnationalMembers. Ref.No.EN17803:2002EEN17803:2002(E) 2 Contents page 1 Scope 4 2 Normativereferences 4 3 Chemicalcompositionlimits . .4 4 Writingrules . 4 5

14、Alloydesignations .4 6 Sequenceofelementsfortheindicationofthechemicalcomposition.5 6.1 Alloyedaluminiumingotsforremeltingandcastings. 5 6.2 Masteralloys . .5 7 Roundingrulesfordeterminationofcompliance .5 Bibliography 6EN17803:2002(E) 3 Foreword Thisdocument(EN17803:2002)hasbeenpreparedbyTechnicalC

15、ommitteeCEN/TC132,“Aluminiumand aluminiumalloys“,thesecretariatofwhichisheldbyAFNOR. ThisEuropeanStandardshallbegiventhestatusofanationalstandard,eitherbypublicationofanidenticaltextor byendorsement,atthelatestbyApril2003,andconflictingnationalstandardsshallbewithdrawnatthelatestby April2003. Within

16、itsprogrammeofwork,TechnicalCommitteeCEN/TC132entrustedCEN/TC132/WG1“Liquidmetal, unalloyedandalloyedingots “topreparethefollowingstandard: EN17803, AluminiumandaluminiumalloysDesignationofalloyedaluminiumingotsforremelting,masteralloys andcastingsPart3:Writingrulesforchemicalcomposition Thisdocumen

17、tsupersedesEN17803:1996 “AluminiumandaluminiumalloysDesignationofalloyedaluminium ingotsforremelting,masteralloysandcastingsPart3:Writingrulesforchemicalcomposition Thedifferencetotheformerversionisthatunalloyedaluminiumisremovedfromthescopeandprovisionsdealing withunalloyedaluminiumaredeleted. Thep

18、rovisionsaboutthewritingrulesofunalloyedaluminiumhavebeentransferredintotherevisedversionof EN576. ThisEuropeanStandardEN1780,“ AluminiumandaluminiumalloysDesignationofalloyedaluminiumingotsfor remelting,masteralloysandcastings” ,comprisesofthefollowingparts: Part1:Numericaldesignationsystem Part2:C

19、hemicalsymbolbaseddesignationsystem Part3:Writingrulesforchemicalcomposition AccordingtotheCEN/CENELECInternalRegulations,thenationalstandardsorganizationsofthefollowing countriesareboundtoimplementthisEuropeanStandard:Austria,Belgium,CzechRepublic,Denmark,Finland, France,Germany,Greece,Iceland,Irel

20、and,Italy,Luxembourg,Malta,Netherlands,Norway,Portugal,Spain, Sweden,SwitzerlandandtheUnitedKingdom.EN17803:2002(E) 4 1Scope ThisEuropeanStandardspecifiesthewritingrulesforchemicalcompositionofalloyedaluminiumingotsfor remelting,masteralloysandcastings. Writingrulesforunalloyedaluminiumarespecifiedi

21、nEN576. Thefivefigurenumericalandthechemicalsymbolbaseddesignationsystemsofmaterialsarespecifiedin EN17801andEN17802,respectively. 2 Normativereferences ThisEuropeanStandardincorporatesbydatedorundatedreference,provisionsfromotherpublications.These normativereferencesarecitedattheappropriateplacesin

22、thetextandthepublicationsarelistedhereafter.For datedreferences,subsequentamendmentstoorrevisionsofanyofthesepublicationsapplytothisEuropean Standardonlywhenincorporatedinitbyamendmentorrevision.Forundatedreferencesthelatesteditionofthe publicationreferredtoapplies(includingamendments). EN575, Alumi

23、niumandaluminiumalloysMasteralloysproducedbymeltingSpecifications. EN1676, AluminiumandaluminiumalloysAlloyedingotsforremeltingSpecifications. EN1706, AluminiumandaluminiumalloysCastingsChemicalcompositionandmechanicalproperties. 3 Chemicalcompositionlimits Thechemicalcompositionlimitsarespecifiedin

24、EN575,EN1676andEN1706. 4 Writingrules Standardlimitsforalloyingelementsandimpuritiesaregenerallyexpressedinpercentagebymasstothefollowing places(exceptincertaincasesasspecifiedinthestandardslistedinclause3): a) lessthan0,001%. 0,000X; b) 0,001%throughlessthan0,01% . 0,00X; c) 0,01%throughlessthan0,1

25、0% . 0,0X; d) 0,10%through0,55%. 0,XX; e) over0,55% . 0,X;X,X;XX,X. 5 Alloydesignations Boththefivefigurebaseddesignationsandthechemicalsymbolbaseddesignationsareusedinthetables appendedtothespecificEuropeanStandards(seeclause3).EN17803:2002(E) 5 6 Sequenceofelementsfortheindicationofthechemicalcomp

26、osition 6.1 Alloyedaluminiumingotsforremeltingandcastings Thelimitsforthealloyingelementsandimpuritiesforalloyedaluminiumingotsforremelting andcastingsshallbe expressedinthefollowingsequence:Silicon,Iron,Copper,Manganese,Magnesium,Chromium,Nickel,Zinc, Lead,Tin,Titanium,otherelementseach,otherelemen

27、tstotal,Aluminium. 6.2 Masteralloys Thelimitsforthealloyingelementsandimpuritiesformasteralloysshallbeexpressedinthefollowingsequence: Silicon,Iron,Copper,Manganese,Magnesium,Chromium,Nickel,Zinc,.,Titanium,otherelementseach,other elementstotal,Aluminium.Thelimitsforadditionalalloyingelementsandimpu

28、ritiesshallbeinsertedin alphabeticalorderoftheirchemicalsymbolsbetweenzincandtitanium,orspecifiedinfootnotes. Aluminiumshallbespecifiedasaremainderforaluminiumalloys. 7 Roundingrulesfordeterminationofcompliance Inrecordingchemicalanalysistestresults,thenumberrepresentingtheresultforanyelementspecifi

29、edinthis standardshallbeexpressedtothesamenumberofdecimalplacesasthecorrespondingnumberinthereference standard. Thefollowingroundingrulesshallbeusedfordeterminationofcompliancewiththisstandard: a) whenthefigureimmediatelyafterthelastfiguretoberetainedislessthan5,thelastfiguretoberetained remainsunch

30、anged; b) whenthefigureimmediatelyafterthelastfiguretoberetainedisgreaterthan5,orequalto5andfollowedby atleastonefigureotherthanzero,thelastfiguretoberetainedisincreasedbyone; c) whenthefigureimmediatelyafterthelastfiguretoberetainedisequalto5andfollowedbyzerosonly,thelast figuretoberetainedremainsu

31、nchangedifevenandisincreasedbyoneifodd.EN17803:2002(E) 6 Bibliography 1 EN576, AluminiumandaluminiumalloysUnalloyedaluminiumingotsforremeltingSpecifications. 2EN 17801, AluminiumandaluminiumalloysDesignationofalloyedaluminiumingotsforremelting, masteralloysandcastingsPart1:Numericaldesignationsystem

32、. 3EN 17802, AluminiumandaluminiumalloysDesignationofalloyedaluminiumingotsforremelting, masteralloysandcastingsPart2:Chemicalsymbolbaseddesignationsystem.blankBS EN 1780-3:2002 BSI 389 Chiswick High Road London W4 4AL BSI British Standards Institution BSI is the independent national body responsibl

33、e for preparing British Standards. It presents the UK view on standards in Europe and at the international level. It is incorporated by Royal Charter. Revisions British Standards are updated by amendment or revision. Users of British Standards should make sure that they possess the latest amendments

34、 or editions. It is the constant aim of BSI to improve the quality of our products and services. We would be grateful if anyone finding an inaccuracy or ambiguity while using this British Standard would inform the Secretary of the technical committee responsible, the identity of which can be found o

35、n the inside front cover. Tel: +44 (0)20 8996 9000. Fax: +44 (0)20 8996 7400. BSI offers members an individual updating service called PLUS which ensures that subscribers automatically receive the latest editions of standards. Buying standards Orders for all BSI, international and foreign standards

36、publications should be addressed to Customer Services. Tel: +44 (0)20 8996 9001. Fax: +44 (0)20 8996 7001. Email: ordersbsi-. Standards are also available from the BSI website at http:/www.bsi-. In response to orders for international standards, it is BSI policy to supply the BSI implementation of t

37、hose that have been published as British Standards, unless otherwise requested. Information on standards BSI provides a wide range of information on national, European and international standards through its Library and its Technical Help to Exporters Service. Various BSI electronic information serv

38、ices are also available which give details on all its products and services. Contact the Information Centre. Tel: +44 (0)20 8996 7111. Fax: +44 (0)20 8996 7048. Email: infobsi-. Subscribing members of BSI are kept up to date with standards developments and receive substantial discounts on the purcha

39、se price of standards. For details of these and other benefits contact Membership Administration. Tel: +44 (0)20 8996 7002. Fax: +44 (0)20 8996 7001. Email: membershipbsi-. Information regarding online access to British Standards via British Standards Online can be found at http:/www.bsi- Further in

40、formation about BSI is available on the BSI website at http:/www.bsi-. Copyright Copyright subsists in all BSI publications. BSI also holds the copyright, in the UK, of the publications of the international standardization bodies. Except as permitted under the Copyright, Designs and Patents Act 1988

41、 no extract may be reproduced, stored in a retrieval system or transmitted in any form or by any means electronic, photocopying, recording or otherwise without prior written permission from BSI. This does not preclude the free use, in the course of implementing the standard, of necessary details suc

42、h as symbols, and size, type or grade designations. If these details are to be used for any other purpose than implementation then the prior written permission of BSI must be obtained. Details and advice can be obtained from the Copyright & Licensing Manager. Tel: +44 (0)20 8996 7070. Fax: +44 (0)20 8996 7553. Email: copyrightbsi-.