BS EN 1630-2011 Pedestrian doorsets windows curtain walling grilles and shutters Burglar resistance Test method for the determination of resistance to manual burglary attempts《人行门具.pdf

《BS EN 1630-2011 Pedestrian doorsets windows curtain walling grilles and shutters Burglar resistance Test method for the determination of resistance to manual burglary attempts《人行门具.pdf》由会员分享，可在线阅读，更多相关《BS EN 1630-2011 Pedestrian doorsets windows curtain walling grilles and shutters Burglar resistance Test method for the determination of resistance to manual burglary attempts《人行门具.pdf（42页珍藏版）》请在麦多课文档分享上搜索。

1、raising standards worldwideNO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBSI Standards PublicationBS EN 1630:2011Pedestrian doorsets, windows, curtain walling, grilles and shutters Burglar resistance Test method for the determination of resistance to manual burglary attemptsL

2、icensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 14/09/2011 04:07, Uncontrolled Copy, (c) BSIBS EN 1630:2011 BRITISH STANDARDNational forewordThis British Standard is the UK implementation of EN 1630:2011. It supersedes DD ENV 1630:1999, which is withdrawn.BSI, as a member of CEN, is obliged pu

3、blish EN 1627, EN 1628, EN 1629, and EN 1630 as British Standards. However, attention is drawn to the fact that, during the development of these European Standards, the UK committee voted against the approval of EN 1627, EN 1628, and EN 1630, and appealed against the ratification of all four standar

4、ds.This is due to the committees belief that the standards do not address all known burglary modus operendi and do not account for lock picking within any of their scopes. Users are to be drawn, in this case, to the existence of PAS 24, which provides enhanced security performance requirements for d

5、oor assemblies.NOTE: A revision of PAS 24 to include windows will commence in 2011.The UK participation in its preparation was entrusted to Technical Committee B/538, Doors, windows, shutters, hardware and curtain walling.A list of organizations represented on this committee can be obtained on reque

6、st to its secretary.This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. BSI 2011ISBN 978 0 580 54357 9ICS 13.310; 91.060.50Compliance with a British Standard cannot confer immunity from legal obligations.This Bri

7、tish Standard was published under the authority of the Standards Policy and Strategy Committee on 30 June 2011.Amendments issued since publicationDate T e x t a f f e c t e dLicensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 14/09/2011 04:07, Uncontrolled Copy, (c) BSIBS EN 1630:2011EUROPEAN STA

8、NDARD NORME EUROPENNE EUROPISCHE NORM EN 1630 May 2011 ICS 13.310; 91.060.50 Supersedes ENV 1630:1999English Version Pedestrian doorsets, windows, curtain walling, grilles and shutters - Burglar resistance - Test method for the determination of resistance to manual burglary attempts Blocs-portes pou

9、r pitons, fentres, faades rideaux, grilles et fermetures - Rsistance leffraction - Mthode dessai pour la dtermination de la rsistance aux tentatives manuelles deffraction Tren, Fenster, Vorhangfassaden, Gitterelemente und Abschlsse - Einbruchhemmung - Prfverfahren fr die Ermittlung der Widerstandsfh

10、igkeit gegen manuelle Einbruchversuche This European Standard was approved by CEN on 2 December 2010. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. U

11、p-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by tran

12、slation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finla

13、nd, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KO

14、MITEE FR NORMUNG Management Centre: Avenue Marnix 17, B-1000 Brussels 2011 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 1630:2011: ELicensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 14/09/2011 04:07, Uncontrolled Copy, (c)

15、BSIBS EN 1630:2011EN 1630:2011 (E) 2 Contents Page Foreword . 41 Scope 52 Normative references . 53 Terms and definitions . 64 Apparatus and test team 74.1 Test rig . 74.2 Test team . 74.3 Measurement and recording devices 84.3.1 Measuring equipment . 84.3.2 Video recording . 84.4 Tolerances . 84.5

16、Sub-frame 95 Test specimen . 95.1 General . 95.2 Preparation and examination of the specimen 106 Procedure 106.1 General . 106.2 Test room climate . 106.3 Areas of attack 106.3.1 General . 106.3.2 Construction products with moving elements 116.3.3 Fixed construction products . 116.4 Attack side and

17、attack height 116.5 Pre-test . 116.6 Main test . 116.7 Failure criteria . 127 Tool sets 127.1 General . 127.2 Tool set A1 resistance class 1 (see Figure A.1) Application of the tool set A1 in resistance class 1 . 127.3 Tool set A2 resistance class 2 (see Figure A.2) Application of the tool set A2 in

18、 resistance class 2 . 137.4 Tool set A3 resistance class 3 (see Figure A.3) Application of the tool set A3 in resistance class 3 . 147.5 Tool set A4 resistance class 4 (see Figure A.4) Application of the tool set A4 in resistance class 4 . 147.6 Tool set A5 resistance class 5 (see Figure A.5) Applic

19、ation of the tool set A5 in resistance class 5 . 157.7 Tool set A6 resistance class 6 (see Figure A.6) Application of the tool set A6 in resistance class 6 . 158 Test report . 16Annex A (normative) Tool sets 18A.1 Tool set A1 . 18A.2 Tool set A2 . 19A.3 Tool set A3 . 20A.4 Tool set A4 . 21A.5 Tool s

20、et A5 . 22Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 14/09/2011 04:07, Uncontrolled Copy, (c) BSIBS EN 1630:2011EN 1630:2011 (E) 3 A.6 Tool set A6 . 23Annex B (normative) Test sequence for manual test of resistance classes 2 to 6 24B.1 Test sequence for manual test of resistance classes

21、2 to 6 24Annex C (normative) Example of test equipment 25Annex D (informative) Examples of mounting arrangements 26D.1 Examples of mounting arrangements for doorsets 26D.2 Examples of mounting arrangements for windows 29D.3 Examples of mounting arrangements for wing and folding shutters 30D.4 Exampl

22、es of mounting arrangements for guide rails and roller shutters into the test rig 32D.5 Examples of mounting arrangements for grilles into the test rig 35Bibliography . 37Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 14/09/2011 04:07, Uncontrolled Copy, (c) BSIBS EN 1630:2011EN 1630:2011 (E

23、) 4 Foreword This document (EN 1627:2011) has been prepared by Technical Committee CEN/TC 33 “Doors, windows, shutters, building hadware and curtain walling”, the secretariat of which is held by AFNOR. This European Standard shall be given the status of a national standard, either by publication of

24、an identical text or by endorsement, at the latest by November 2011, and conflicting national standards shall be withdrawn at the latest by November 2011. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall no

25、t be held responsible for identifying any or all such patent rights. This document supersedes ENV 1630:1999. This European Standard is one of a series of standards for burglar resistant pedestrian doorsets, windows, curtain walling, grilles and shutters. The other standards in the series are: EN 162

26、7:2011, Pedestrian doorsets, windows, curtain walling, grilles and shutters Burglar resistance Requirements and classification; EN 1628:2011, Pedestrian doorsets, windows, curtain walling, grilles and shutters Burglar resistance Test method for the determination of resistance under static loading; E

27、N 1629:2011, Pedestrian doorsets, windows, curtain walling, grilles and shutters Burglar resistance Test method for the determination of resistance under dynamic loading. This standard is a revision of, and supersedes ENV 1630:1999. The three other standards in this series are revisions of, and supe

28、rsede ENV 1627, ENV 1628 and ENV 1629 respectively. This revision incorporates grilles and curtain walling in the range of application. The manual test described in this standard covers the areas of vulnerability not suitably assessed by the static loading and dynamic loading tests described in EN 1

29、628:2011 and EN 1629:2011. Certain basic security requirements for the locks, furniture and cylinders are covered by the requirements detailed in Table 3 of EN 1627:2011. These security characteristics are not re-assessed in this test standard and the attack methods and test times have been limited

30、to reflect this. The use of the tools detailed in the various tools sets is described in this standard. This has the advantage of improving the reproducibility of the test. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to

31、 implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Swede

32、n, Switzerland and the United Kingdom. Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 14/09/2011 04:07, Uncontrolled Copy, (c) BSIBS EN 1630:2011EN 1630:2011 (E) 5 1 Scope This European Standard specifies a test method for the determination of resistance to manual burglary attempts in order

33、to assess the burglar resistant characteristics of pedestrian doorsets, windows, curtain walling, grilles and shutters. It is applicable to the following means of opening: Turning, tilting, folding, turn-tilting, top or bottom hung, sliding (horizontally and vertically) and rolling as well as fixed

34、constructions. This European Standard does not directly cover the resistance of locks and cylinders to attack with picking tools. It also does not cover the attack of electric, electronic and electromagnetic operated burglar resistant construction products using attack methods that might defeat thes

35、e characteristics. It is acknowledged that there are two aspects to the burglar resistance performance of construction products, their normal resistance to forced operation and their ability to remain fixed to the building. Due to the limitation of reproducing the fixing methods and building constru

36、ction in a laboratory environment this aspect is not fully covered by the standard. This is particularly true with products built into a building. The performance of the fixed part of the product is evaluated using a standard sub frame. It is the manufacturers responsibility to ensure that guidance

37、on the fixing of the product is contained in the mounting instructions and that this guidance is suitable for the burglar resistance class claimed for the product. As with the other referenced standards this specification uses a standard sub frame and the product is mounted according to the manufact

38、urers instructions. An example for the contents of the manufacturers installation instructions is given in Annex A of EN 1627:2011. This test method does not evaluate the performance of the fixing to the building. This European Standard does not apply to doors, gates and barriers, intended for insta

39、llation in areas in the reach of persons, and for which the main intended uses are giving safe access for goods and vehicles accompanied or driven by persons in industrial, commercial or residential premises, as covered by EN 13241-1. 2 Normative references The following referenced documents are ind

40、ispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 356:1999, Glass in building Security glazing Testing and classification of resistance ag

41、ainst manual attack EN 1303:2005, Building hardware Cylinders for locks Requirements and test methods EN 1627:2011, Pedestrian doorsets, windows, curtain walling, grilles and shutters Burglar resistance Requirements and classification EN 1628:2011, Pedestrian doorsets, windows, curtain walling, gril

42、les and shutters Burglar resistance Test method for the determination of resistance under static loading EN 1629:2011, Pedestrian doorsets, windows, curtain walling, grilles and shutters Burglar resistance Test method for the determination of resistance under dynamic loading EN 1906:2010, Building h

43、ardware Lever handles and knob furniture Requirements and test methods EN 12209:2003, Building hardware Locks and latches Mechanically operated locks, latches and locking plates Requirements and test methods Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 14/09/2011 04:07, Uncontrolled Copy,

44、(c) BSIBS EN 1630:2011EN 1630:2011 (E) 6 EN ISO/IEC 17025:2005, General requirements for the competence of testing and calibration laboratories 3 Terms and definitions For the purposes of this document, the terms and definitions given in EN 1627:2011 and the following apply. 3.1 attack side side of

45、the test specimen defined by the applicant as the side exposed to attack 3.2 test specimen complete, fully functioning construction product as detailed in the scope of this standard 3.3 sub-frame surrounding frame into which the test specimen is mounted in accordance with the manufacturers instructi

46、ons 3.4 test rig surrounding substantial steel frame with movable steel supports into which the sub-frames containing test specimens of various dimensions can be mounted 3.5 tool set set of tools allocated for use for a particular resistance class NOTE For details of the tool set, see Clause 7 and A

47、nnex A. 3.6 resistance time working time of the test person carrying out the manual burglary test (see EN 1627:2011, Table 7) NOTE The resistance time includes times of less than 5 s each for tool changes, e.g. exchanging a screwdriver for a crow bar. 3.7 rest time time taken when the test person ca

48、rrying out the manual burglary test interrupts his work for a rest 3.8 tool change time time for the exchange or replacement of a tool or a part thereof, e.g. a defective drill, a blunt saw blade etc. 3.9 observation time time required for the test team to observe the test and to decide on its furth

49、er execution 3.10 total test time combination of the resistance times, the rest times, the times for tool changes and the observation times during the main test Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 14/09/2011 04:07, Uncontrolled Copy, (c) BSIBS EN 1630:2011EN 1630:2011 (E) 7 3.11 accessib