BS EN 1596-1998 Specification for dedicated liquefied petroleum gas appliances - Mobile and portable non-domestic forced convection direct fired air heaters《专用液化石油气的器具规范 移动式和便携式非家用.pdf

《BS EN 1596-1998 Specification for dedicated liquefied petroleum gas appliances - Mobile and portable non-domestic forced convection direct fired air heaters《专用液化石油气的器具规范 移动式和便携式非家用.pdf》由会员分享，可在线阅读，更多相关《BS EN 1596-1998 Specification for dedicated liquefied petroleum gas appliances - Mobile and portable non-domestic forced convection direct fired air heaters《专用液化石油气的器具规范 移动式和便携式非家用.pdf（64页珍藏版）》请在麦多课文档分享上搜索。

1、BRITISH STANDARD BS EN 1596:1998 Incorporating Amendment No. 1 Specification for dedicated liquefied petroleum gas appliances Mobile and portable non-domestic forced convection direct fired air heaters The European Standard EN 1596:1998, with the incorporation of amendment A1:2004, has the status of

2、 a British Standard ICS 91.140.20 BS EN 1596:1998 This British Standard, having been prepared under the direction of the Engineering Sector Committee, was published under the authority of the Standards Committee and comes into effect on 15 December 1998 BS 12 May 2004 ISBN 0 580 30335 7 National for

3、eword This British Standard is the official English language version of EN 1596:1998, including amendment A1:2004. It supersedes BS 4096:1967 which is withdrawn. The start and finish of text introduced or altered by amendment is indicated in the text by tags !“. Tags indicating changes to CEN text c

4、arry the number of the CEN amendment. For example, text altered by CEN amendment A1 is indicated by !“. The UK participation in its preparation was entrusted to Technical Committee GSE/24, Dedicated LPG appliances, which has the responsibility to: A list of organizations represented on this committe

5、e can be obtained on request to its secretary. Cross-references The British Standards which implement international or European publications referred to in this document may be found in the BSI Catalogue under the section entitled “International Standards Correspondence Index”, or by using the “Sear

6、ch” facility of the BSI Electronic Catalogue or of British Standards Online. This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. Compliance with a British Standard does not of itself confer immunity from legal ob

7、ligations. aid enquirers to understand the text; present to the responsible international/European committee any enquiries on the interpretation, or proposals for change, and keep the UK interests informed; monitor related international and European developments and promulgate them in the UK. Summar

8、y of pages This document comprises a front cover, an inside front cover, the EN title page, pages 2 to 61 and a back cover. The BSI copyright notice displayed in this document indicates when the document was last issued. Amendments issued since publication Amd. No. Date Comments 14916 12 May 2004 Se

9、e national foreword EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 1596 June 1998 + A1 March 2004 ICS 91.140.20 Descriptors: heaters, gas appliances, pressure equipment, liquefied petroleum gases, mobile equipment, portable equipment, definitions, classifications, safety, specifications, tests

10、, marking, technical notices, name plates English version Specification for dedicated liquefied petroleum gas appliances Mobile and portable non-domestic forced convection direct fired air heaters (including amendment A1:2004) Spcifications pour les appareils fonctionnant exclusivement aux gaz de pt

11、role liqufis Gnrateurs dair chaud gaz, non domestiques, chauffage direct et convection force, mobiles et portatifs (inclut lamendement A1:2004) Festlegungen fr Flssiggasgerte Ortsvernderliche und tragbare, nicht fr den Hausgebrauch bestimmte Warmlufterzeuger ohne Warmeaustausher mit erzwungener Konv

12、ektion (enthlt nderung A1:2004) This European Standard was approved by CEN on 23 May 1998, and amendment A1 was approved by CEN on 24 December 2003. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status o

13、f a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A v

14、ersion in any other language made by translation under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Es

15、tonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. European Committee for Standardization Comit Europen de Normalisation Europisches

16、 Komitee fr NormungCentral Secrtariat: rue de Stassart, 36, B-1050 Brussels 1998 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 1596:1998 + A1:2004 EPage 2 EN 1596:1998 Foreword This European Standard has been prepared by Technica

17、l Committee CEN/TC 181, Dedicated liquefied petroleum gas appliances, the Secretariat of which is held by NSAI. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by December 1998, and conflicting natio

18、nal standards shall be withdrawn at the latest by December 1998. This European Standard has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association, and supports essential requirements of EU Directive(s). For relationship with EU Directive(s), se

19、e informative Annex ZA, which is an integral part of this standard. Particular attention should be paid to the suitability of non-metallic materials used in the construction of these appliances. A European Standard for “Flexible hose, tubing and assemblies for use with propane and butane in the vapo

20、ur phase” is being prepared by CEN/TC 218. These standards will be applicable to these types of appliances. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Denmark, Fin

21、land, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and the United Kingdom. Foreword to amendment A1 This document (EN 1596:1998/A1:2004) has been prepared by Technical Committee CEN/TC 181, Dedicated liquefied petroleum gas a

22、ppliances, the Secretariat of which is held by AFNOR. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by September 2004, and conflicting national standards shall be withdrawn at the latest by Septemb

23、er 2004. This document has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association, and supports essential requirements of EU Directive(s) For relationship with EU Directive(s), see informative Annex ZA, which is an integral part of this document

24、. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,

25、Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. Page 3 EN 1596:1998 Contents . Page Foreword . 2 1 Scope. 6 2 Normative references 7 3 Definitions. 8 4 Classification. 13 4.1 Classification of gases. 13 4.2 C

26、lassification of low pressure appliances . 14 4.3 Classification of medium pressure appliances 15 5 Safety and constructional requirements 15 5.1 General 15 5.2 Conversion to different gases 16 5.3 Materials. 16 5.4 Cleaning and maintenance 16 5.5 Strength of assembly. 16 5.6 Soundness of the gas ci

27、rcuit assembly 17 5.7 Connections. 17 5.8 Appliance stability, transport and mobility devices 18 5.9 Taps and controls 18 5.10 Control handles. 19 5.11 Injectors. 20 5.12 Ignition devices. 20 5.13 Safety devices. 21 5.14 Facility for remote control 25 5.15 Thermostats and control of air temperature

28、25 5.16 Electrical equipment. 26 5.17 Operational safety in the event of failure of auxiliary energy. 26 5.18 Motors and fans. 26 5.19 Heat inputs 26 5.20 Overheating of the LPG cylinder and, where applicable, its compartment 27 5.21 Temperature of various parts of the appliance 27 5.22 Floor temper

29、atures 28 5.23 Temperature of taps and components . 28 5.24 Air delivery temperatures 28 5.25 Ignition 28 5.26 Crosslighting. 30 5.27 Flame stability. 30 5.28 Flame length 31 5.29 Combustion. 31 5.30 Operation safety 31 Page 4 EN 1596:1998 6 Test conditions and methods. 31 6.1 General 31 6.2 Convers

30、ion to different gases 35 6.3 Materials. 35 6.4 Cleaning and maintenance 36 6.5 Strength of assembly. 36 6.6 Soundness of the gas circuit assembly 36 6.7 Connections. 37 6.8 Appliance stability, transport and mobility devices 37 6.9 Taps and controls 37 6.10 Control handles. 37 6.11 Injectors. 37 6.

31、12 Ignition devices. 37 6.13 Safety devices. 37 6.14 Facility for remote control 40 6.15 Thermostats and control of air temperatures. 41 6.16 Electrical equipment. 41 6.17 Operational safety in the event of failure of auxiliary energy. 41 6.18 Motors and fans. 41 6.19 Heat inputs 41 6.20 Overheating

32、 of the LPG cylinder, and where applicable, its compartment 44 6.21 Temperatures of various parts of the appliance 44 6.22 Floor temperatures 45 6.23 Temperatures of taps and components 45 6.24 Air delivery temperatures 45 6.25 Ignition 46 6.26 Crosslighting. 47 6.27 Flame stability. 48 6.28 Flame l

33、ength 48 6.29 Combustion. 48 6.30 Operational safety. 49 7 Marking and instruction literature. 49 7.1 General 49 7.2 Data plate 50 7.3 Other markings 50 7.4 Instructions for use and user maintenance 51 7.5 Servicing instructions 52 7.6 Packaging 53 Figure 1 Apparatus for the measurement of the incre

34、ase of vapour pressure 54 Figure 2 Measurement of air delivery temperatures 55 Figure 3 Sample probe . 56 Figure B.1 Nozzles. 59 Figure B 2 Threaded union connector 62 Page 5 EN 1596:1998 Table 1 Classification of gases. 14 Table 2 Maximum allowable pressure increase inside the LPG cylinder 27 Table

35、 3 Test gases corresponding to the categories of appliances. 32 Table 4 Characteristics of test gases 33 Table 5 Test pressures (low pressure appliances) 34 Table 6 Test pressures (medium pressure appliances). 35 Table 7 Test gases and pressures for ignition tests 46 Table 8 Test gases and pressures

36、 for crosslighting tests 47 Table 9 Carbon dioxide produced by test gases. 49 Annex A (informative) Air supply and ventilation 57 Annex B (normative) Special national conditions . . 58 Annex ZA (informative) Correspondence between this standard and EC Directive 90/396/EEC. . 61 Page 6 EN 1596:1998 1

37、 Scope This standard defines, for the purpose of type examination, the construction, the safety characteristics, the test methods and the marking of mobile and portable non-domestic forced convection direct fired air heaters with a rated heat input not exceeding 180 kW (H s ) and burning third famil

38、y gases, referred to in the body of the text as “appliances”. This standard covers the following type of mobile and portable non-domestic forced convection direct fired air heaters of type A 3(see CR 1749) fitted with an integral burner intended for use in other than residential dwellings: a) low ga

39、s pressure appliances operating at pressures up to and including 50 mbar burning commercial butane and/or commercial propane; b) medium gas pressure appliances operating at pressures above 50 mbar and up to !2 bar“ burning commercial butane and/or commercial propane. It does not apply to appliances

40、which are intended to be fixed or permanently installed, or to appliances which incorporate liquid feed burners. Requirements for appliances given in this standard assume that the supply of gas from the gas cylinder will be governed by a pressure regulator. These appliances are not equipped with an

41、appliance governor. !Text deleted.“ This standard does not cover cylinders for liquefied petroleum gases or their associated regulators. There are no specific thermal efficiency requirements appropriate to these types of appliances as: a) all the heat produced by the combustion process is released i

42、nto the space to be heated; b) the requirements with regard to the combustion performance, which is a safety matter, ensure the effective burning of the fuel gas. 2 Normative references This European Standard incorporates, by dated or undated reference, provisions from other publications. These norm

43、ative references are cited at the appropriate places in the text and the publications are listed hereafter. For dated references, subsequent amendments to or revisions of any of these publications apply to this European Standard only when incorporated in it by amendment or revision. For undated refe

44、rences the latest edition of the publication referred to applies. EN 125, Flame supervision devices for gas burning appliances Thermo-electric flame supervision devices. EN 126, Multifunctional controls for gas burning appliances. EN 161 ,Automatic shut-off valves for gas burners and gas appliances.

45、 Page 7 EN 1596:1998 EN 257, Mechanical thermostats for gas-burning appliance. EN 298, Automatic gas burner control systems for gas burners and gas burning appliances with or without fans. EN 437, Test gases Test pressures Appliance categories. prEN 1106, Manually operated taps for gas burning appli

46、ances. EN 50165, Electrical equipment of non-electric appliances for household and similar purposes Safety requirements. EN 60529, Degrees of protection provided by enclosures (IP Code). (IEC 60529:1989) EN 60335-1, Safety of household and similar electrical appliances Part 1: General requirements.

47、(IEC 60335-1:1991, modified) EN 60730-2-1, Automatic electrical controls for household and similar use Part 2: Particular requirements for electrical controls for electrical household appliances. (IEC 60730-2-1:1989, modified) EN 60730-2-9, Automatic electrical controls for household and similar use

48、 Part 2: Particular requirements for temperature sensing controls. (IEC 60730-2-9:1992, modified) IEC 34-5, Rotating machines Part 5: Classification of degrees of protection provided by enclosures of rotating electrical machines. CR 1749, European scheme for the classification of gas appliances acco

49、rding to the method of evacuation of the products of combustion (types). 3 Definitions For the purpose of this standard the following definitions apply. 3.1 air proving device device which monitors and proves the existence of an adequate flow of air for combustion and, where appropriate, for dilution 3.2 automatic burner control system system that comprises a programming unit and all the elements of a flame detector. All the functions of