BS EN 1069-2-2017 Water slides Instructions《滑水道 说明书》.pdf

《BS EN 1069-2-2017 Water slides Instructions《滑水道 说明书》.pdf》由会员分享，可在线阅读，更多相关《BS EN 1069-2-2017 Water slides Instructions《滑水道 说明书》.pdf（44页珍藏版）》请在麦多课文档分享上搜索。

1、Water slidesPart 2: InstructionsBS EN 10692:2017BSI Standards PublicationWB11885_BSI_StandardCovs_2013_AW.indd 1 15/05/2013 15:06EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 1069-2 August 2017 ICS 97.220.40 Supersedes EN 1069-2:2010English Version Water slides - Part 2: Instructions Toboggan

2、s aquatiques - Partie 2: Instructions Wasserrutschen - Teil 2: Hinweise This European Standard was approved by CEN on 14 May 2017. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national stand

3、ard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in an

4、y other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Repu

5、blic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom.

6、EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2017 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 1069-2:2017

7、ENational forewordThis British Standard is the UK implementation of EN 10692:2017. It supersedes BS EN 10692:2010, which is withdrawn.The UK participation in its preparation was entrusted to Technical Committee SW/136/8, Swimming pools and aquatic equipment.A list of organizations represented on thi

8、s committee can be obtained on request to its secretary.This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. The British Standards Institution 2017 Published by BSI Standards Limited 2017ISBN 978 0 580 90572 8ICS

9、97.220.40Compliance with a British Standard cannot confer immunity from legal obligations.This British Standard was published under the authority of the Standards Policy and Strategy Committee on 30 September 2017.Amendments/corrigenda issued since publicationDate Text affectedBRITISH STANDARDBS EN

10、10692:2017EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 1069-2 August 2017 ICS 97.220.40 Supersedes EN 1069-2:2010English Version Water slides - Part 2: Instructions Toboggans aquatiques - Partie 2: Instructions Wasserrutschen - Teil 2: Hinweise This European Standard was approved by CEN on 1

11、4 May 2017. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be o

12、btained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the

13、 CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Irel

14、and, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG CEN-CENELEC Manage

15、ment Centre: Avenue Marnix 17, B-1000 Brussels 2017 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 1069-2:2017 EBS EN 10692:2017EN 1069-2:2017 (E) 2 Contents Page European foreword 3 Introduction 4 1 Scope 5 2 Normative references

16、 5 3 Terms and definitions . 5 4 Operation . 6 4.1 General 6 4.2 Guidelines to the operational risk assessment 6 4.3 Risk reduction 7 4.4 Basic elements for the identification of proper supervision 7 4.5 Technical operation . 8 4.6 Emergency instructions 8 4.7 Incident logbook . 8 5 Instructions for

17、 users 8 5.1 Planning and use of signage 8 5.2 Signage at the entrance of a slide 9 5.3 Additional user information . 11 6 Documentation 12 7 Maintenance instructions 12 7.1 General 12 7.2 Servicing . 13 7.3 Repair 13 7.4 Modifications 13 8 Inspections 14 8.1 Inspection by the operator 14 8.2 Indepe

18、ndent periodic thorough inspection 14 9 Commissioning 15 10 Quality of Water 15 Annex A (normative) Safety and information signs for water slides 16 Annex B (informative) Example of the risk assessment 23 B.1 Example of general risk assessment procedure 23 B.2 Example of risk assessment about users

19、spacing in Type 3 slide . 28 B.3 Example of risk assessment about users spacing in Type 5 slide . 34 Table B.4 Hazards identification, risk estimation, risk evaluation . 36 Bibliography . 39 BS EN 10692:2017EN 1069-2:2017 (E) 3 European foreword This document (EN 1069-2:2017) has been prepared by Te

20、chnical Committee CEN/TC 136 “Sports, playground and other recreational facilities and equipment”, the secretariat of which is held by DIN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by February

21、 2018, and conflicting national standards shall be withdrawn at the latest by February 2018. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent r

22、ights. This document supersedes EN 1069-2:2010. EN 1069, Water slides, consists of: Part 1: Safety requirements and test methods Part 2: Instructions In relation to EN 1069-2:2010 the following main amendments have been made: a) the document has been editorially revised; b) a risk in 4.2 “Guidelines

23、 to the operational risk assessment” has been added; c) in 8.1.1 “Routine visual inspection” one additional requirement was included; d) in 8.2.2 “Inspection procedure” the relevant components for the test have been changed; e) the requirements for 8.2.3 “Periodical practical sliding test” have been

24、 changed; f) Figure A.5 “Minimum/Maximum height of the user” has been divided in a) minimum height, b) maximum height, c) maximum age and d) minimum age; g) in B.2.3 “Limits of the water slide Use limits” a requirement to the basic information has been changed. According to the CEN-CENELEC Internal

25、Regulations, the national standards organisations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Irelan

26、d, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. BS EN 10692:2017EN 1069-2:2017 (E) 4 Introduction The provision of water slide installations is increasing, also are

27、the concerns over the number of injuries resulting from the use of water slides, many of which are of a serious nature. Many of the injuries have resulted from foreseeable circumstances and, given proper knowledge and control, could have been prevented. A standard or a code of practice for instructi

28、ons and the operation of water slides is seen as the most appropriate way to achieve an improvement in safety. BS EN 10692:2017EN 1069-2:2017 (E) 5 1 Scope This European Standard is applicable to water slides as defined in EN 1069-1:2017, 3.3. This European Standard establishes the instructions for

29、use, operation and maintenance as well as the documentation and commissioning of water slides. 2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited appl

30、ies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 1069-1:2017, Water slides Part 1: Safety requirements and test methods EN 15288-1, Swimming pools Part 1: Safety requirements for design EN 15288-2:2008, Swimming pools - Part 2: Safety

31、requirements for operation EN ISO 3834 (all parts), Quality requirements for fusion welding of metallic materials (ISO 3834) EN ISO 9606-1, Qualification testing of welders - Fusion welding - Part 1: Steels (ISO 9606-1) EN ISO 15607, Specification and qualification of welding procedures for metallic

32、 materials - General rules (ISO 15607) ISO 3864-1, Graphical symbols Safety colours and safety signs Part 1: Design principles for safety signs and safety markings ISO 3864-3, Graphical symbols Safety colours and safety signs Part 3: Design principles for graphical symbols for use in safety signs IS

33、O 7001, Graphical symbols Public information symbols ISO 7010, Graphical symbols Safety colours and safety signs Registered safety signs ISO 20712-1, Water safety signs and beach safety flags Part 1: Specifications for water safety signs used in workplaces and public areas ISO 20712-3:2014, Water sa

34、fety signs and beach safety flags Part 3: Guidance for use ISO 22727, Graphical symbols Creation and design of public information symbols Requirements 3 Terms and definitions For the purposes of this document, the terms and definitions given in EN 1069-1:2017 and the following apply. 3.1 operator co

35、mpany, organization, authority or person with overall control and responsibility for the water slide facility BS EN 10692:2017EN 1069-2:2017 (E) 6 3.2 platform area providing access to the start section 3.3 raft type of ride enhancement device for one or more users 4 Operation 4.1 General EN 15288-2

36、 applies and EN 15288-1 shall be considered if appropriate. The following subclauses give specific advice related to water slides. 4.2 Guidelines to the operational risk assessment An operational risk assessment shall be performed by the slide operator, based on the results of the design risk assess

37、ment, as a basis for the identification of the proper supervision, following the requirements of EN 15288-2. In addition, and referring to the fact that impact between the users proved to be a critical issue, also the following risks shall be taken into consideration: a) inappropriate spacing at the

38、 start between users; b) sliding position (e.g. sitting) can bring the user to an involuntary stop; c) significant differences in speed can cause collisions of users; d) significant differences in speed caused by: 1) different sliding positions; 2) different bathing costume respectively wearing hard

39、ly any bathing costume (e.g. G-string type); 3) different fitness, size, weight and age of user; 4) Stopping or changing water flow rate (malfunction of water supply); e) reasonably foreseeable risky behaviours by the users: 1) higher risk of collision between users at a splashdown area in contrast

40、to a catch unit; f) suitability for children; g) foreseeable users categories (e.g. adults, children, both) and number of users (e.g. chain sliding allowed); h) allowed use of ride enhancement devices (e.g. mattresses, rafts); i) Unauthorised access. Examples of general and specific risk assessments

41、 are given in Annex B. BS EN 10692:2017EN 1069-2:2017 (E) 7 4.3 Risk reduction The operator shall take measures to reduce possible risks to a minimum bearing in mind the risky behaviours of users by choosing an appropriate level of distance control and supervision and shall identify a risk reduction

42、 strategy from the following options: a) permanent full supervision by the staff at the start section and at the splashdown area/catch unit, staff is in communication with each other; b) adequate technical distance control, e.g. turnstiles at the entrance and/or exit area and/or a traffic light cont

43、rol at the entrance; c) a proper level of supervision/technical measures as a result of the risk assessment. Additional safety equipment which may be used: d) For the user: The installation of a monitor at the start section that transmits the situation at the end of the slide and at the catch unit/s

44、plashdown area for the person who is starting to see whether the catch unit or the splashdown area of the pool is free. e) For the supervisory staff: The installation of a monitor at the staff terminal that transmits the situation at the start and the end of the slide and at the catch unit/splashdow

45、n area. The quality of technical distance control equipment depends on the risk assessment and should be carried out in accordance with EN ISO 13849-2. 4.4 Basic elements for the identification of proper supervision The operator, by performing the part of the risk assessment concerning proper superv

46、ision, shall take into account at least the following: a) kind of landing: 1) catch unit; 2) sofa unit; 3) special pool and its water depth at landing; 4) general purpose pool and its water depth at landing; b) speed at the final part; c) presence and kind of distance control: 1) full technical dist

47、ance control; 2) traffic lights; 3) other types; d) visibility for the user: 1) slide fully visible from the start; 2) catch unit visible from the start; 3) pool visible from the start. BS EN 10692:2017EN 1069-2:2017 (E) 8 The use of mandatory and prohibition signs and public information symbols sho

48、uld also be considered when determining the proper supervision to enforce them. 4.5 Technical operation Written guidelines shall be produced concerning operational instructions by the operator paying particular attention to operational safety aspects (e.g. starting procedure, sliding speed of the us

49、ers see EN 1069-1:2017, 7.13). These instructions shall comprise: detailed explanation of the controls and their function; recommended user access and egress procedures, exclusively allowed sliding positions and any limitations necessary to prevent static overload of the water slide; the prescribed limiting conditions stating any limitations for user, the limits of speed of operation, the sliding time and the maximum numbers of user to be carried; emergency evacuation procedures; any environmental limitations, e.g. c