BS DD ISO TS 25740-1-2012 Safety requirements for escalators and moving walks Global essential safety requirements (GESR)《自动扶梯和运动过道的安全要求 全球基本安全要求(GESR)》.pdf

《BS DD ISO TS 25740-1-2012 Safety requirements for escalators and moving walks Global essential safety requirements (GESR)《自动扶梯和运动过道的安全要求 全球基本安全要求(GESR)》.pdf》由会员分享，可在线阅读，更多相关《BS DD ISO TS 25740-1-2012 Safety requirements for escalators and moving walks Global essential safety requirements (GESR)《自动扶梯和运动过道的安全要求 全球基本安全要求(GESR)》.pdf（54页珍藏版）》请在麦多课文档分享上搜索。

1、raising standards worldwideNO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBSI Standards PublicationDD ISO/TS 25740-1:2011Safety requirements forescalators and moving walksPart 1: Global essential safety requirements(GESR)DD ISO/TS 25740-1:2011 DRAFT FOR DEVELOPMENTNational for

2、ewordThis Draft for Development is the UK implementation of ISO/TS25740-1:2011.This publication is not to be regarded as a British Standard.It is being issued in the Draft for Development series of publicationsand is of a provisional nature. It should be applied on thisprovisional basis, so that inf

3、ormation and experience of its practicalapplication can be obtained.Comments arising from the use of this Draft for Developmentare requested so that UK experience can be reported to theinternational organization responsible for its conversion toan international standard. A review of this publication

4、 willbe initiated not later than 3 years after its publication by theinternational organization so that a decision can be taken on itsstatus. Notification of the start of the review period will be made inan announcement in the appropriate issue of Update Standards.According to the replies received b

5、y the end of the review period,the responsible BSI Committee will decide whether to support theconversion into an international Standard, to extend the life of theTechnical Specification or to withdraw it. Comments should be sentto the Secretary of the responsible BSI Technical Committee at BritishS

6、tandards House, 389 Chiswick High Road, London W4 4AL.The UK participation in its preparation was entrusted to TechnicalCommittee MHE/4, Lifts, hoists and escalators.A list of organizations represented on this committee can beobtained on request to its secretary.This publication does not purport to

7、include all the necessaryprovisions of a contract. Users are responsible for its correctapplication. The British Standards Institution 2012ISBN 978 0 580 66214 0ICS 91.140.90Compliance with a British Standard cannot confer immunity fromlegal obligations.This Draft for Development was published under

8、 the authority ofthe Standards Policy and Strategy Committee on 31 January 2012.Amendments issued since publicationDate Text affectedDD ISO/TS 25740-1:2011Reference numberISO/TS 25740-1:2011(E)ISO 2011TECHNICAL SPECIFICATION ISO/TS25740-1First edition2011-08-01Safety requirements for escalators and

9、moving walks Part 1: Global essential safety requirements (GESR) Exigences de scurit des escaliers mcaniques et trottoirs roulants Partie 1: Exigences essentielles de scurit globale DD ISO/TS 25740-1:2011ISO/TS 25740-1:2011(E) COPYRIGHT PROTECTED DOCUMENT ISO 2011 All rights reserved. Unless otherwi

10、se specified, no part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or ISOs member body in the country of the requester. ISO copyright o

11、ffice Case postale 56 CH-1211 Geneva 20 Tel. + 41 22 749 01 11 Fax + 41 22 749 09 47 E-mail copyrightiso.org Web www.iso.org Published in Switzerland ii ISO 2011 All rights reservedDD ISO/TS 25740-1:2011ISO/TS 25740-1:2011(E) ISO 2011 All rights reserved iiiContents Page Foreword . v Introduction vi

12、 1 Scope 1 2 Normative references 2 3 Terms, definitions and abbreviated terms 2 4 Approach and methodology . 5 4.1 Background 5 4.2 Approach 6 4.3 Methodology 6 5 Understanding and implementing GESRs 6 5.1 Overall objective 6 5.2 Use of GESRs 7 5.2.1 Basis . 7 5.2.2 Ways of using GESRs . 7 5.2.3 Ap

13、plicability of GESRs 8 5.2.4 Safety objectives of GESRs . 8 5.2.5 Verification of compliance 9 5.3 Use of this part of ISO/TS 25740 9 5.3.1 General considerations . 9 5.3.2 Standards developers . 9 5.3.3 Designers, manufacturers, installers, maintenance and service organisations 10 5.3.4 Conformity

14、assessment bodies . 11 5.3.5 Inspection and testing bodies 11 6 Global essential safety requirements (GESRs) 11 6.1 General . 11 6.2 Common GESRs related to persons at different locations . 12 6.2.1 Strength and size . 12 6.2.2 Falling down or off the area containing the travel path 12 6.2.3 Support

15、s for escalator and moving walk equipment . 12 6.2.4 Maintenance of escalators and moving walks . 12 6.2.5 Equipment inaccessible to users and non-users 12 6.2.6 Surfaces of the LCU, landing and working areas 12 6.2.7 Hazards due to relative movement 13 6.2.8 Sharp edges . 13 6.2.9 Hazards arising f

16、rom the risk of electric shock . 13 6.2.10 Electrical equipment . 13 6.2.11 Electromagnetic compatibility . 13 6.2.12 Illumination of LCU and landings 13 6.2.13 Effects of earthquake 13 6.2.14 Hazardous materials . 14 6.2.15 Environmental influences . 14 6.2.16 Noise and vibration . 14 6.2.17 Exclus

17、ive use of machinery spaces 14 6.2.18 Starting . 14 6.3 GESRs related to non-users . 14 6.3.1 Contact with moving or rotating parts 14 6.3.2 Failure mode 15 6.3.3 Environmental influence . 15 6.4 GESRs related to persons on the landings 15 DD ISO/TS 25740-1:2011ISO/TS 25740-1:2011(E) iv ISO 2011 All

18、 rights reserved6.4.1 Falling from the landings 15 6.4.2 Access and egress 15 6.4.3 Alignment of LCU and landing .15 6.5 GESRs related to users on the LCU .15 6.5.1 Strength and size .15 6.5.2 LCU support .15 6.5.3 Entrapment between LCU component parts .15 6.5.4 Entrapment between LCU and adjacent

19、surfaces 16 6.5.5 Uncontrolled movement of LCU .16 6.5.6 LCU collision with objects in the travel path 16 6.5.7 Change of speed of the LCU .16 6.5.8 Stopping means adjacent to the LCU 16 6.5.9 Succeeding LCUs 16 6.5.10 Stopping the LCU .16 6.6 GESRs related to authorized persons at working areas16 6

20、.6.1 Working space .16 6.6.2 Accessible equipment .17 6.6.3 Access to and egress from working spaces .17 6.6.4 Strength of working areas 17 6.6.5 Movement of the LCU under the sole control of an authorized person .17 6.6.6 Protection from moving parts 17 6.6.7 Stopping devices in working areas 17 6.

21、6.8 Means of protection from various hazards .17 6.6.9 Electric shock in working spaces 17 6.6.10 Illumination of working spaces 17 6.6.11 Harmful materials and environment 18 6.6.12 Ergonomic principles 18 6.6.13 Handling and transportation .18 Annex A (informative) Overview of GESRs in relation to

22、 subsystems of escalators and moving walks 19 A.1 General 19 A.2 Summary of GESRs specified in Clause 6 19 Annex B (informative) Compliance of this part of ISO/TS 25740 with the European Directive for Machinery 2006/42/EC .22 B.1 Introduction 22 B.2 General 22 B.3 Comparison of GESRs with Machinery

23、Directive 2006/42/EC .23 B.4 Guidance on the implications of the ISO Global Relevance policy 40 Bibliography 42 DD ISO/TS 25740-1:2011ISO/TS 25740-1:2011(E) ISO 2011 All rights reserved vForeword ISO (the International Organization for Standardization) is a worldwide federation of national standards

24、 bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organiza

25、tions, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization. International Standards are drafted in accordance with the rules given in t

26、he ISO/IEC Directives, Part 2. The main task of technical committees is to prepare International Standards. Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at least 75 % of

27、 the member bodies casting a vote. In other circumstances, particularly when there is an urgent market requirement for such documents, a technical committee may decide to publish other types of normative document: an ISO Publicly Available Specification (ISO/PAS) represents an agreement between tech

28、nical experts in an ISO working group and is accepted for publication if it is approved by more than 50 % of the members of the parent committee casting a vote; an ISO Technical Specification (ISO/TS) represents an agreement between the members of a technical committee and is accepted for publicatio

29、n if it is approved by 2/3 of the members of the committee casting a vote. An ISO/PAS or ISO/TS is reviewed after three years in order to decide whether it will be confirmed for a further three years, revised to become an International Standard, or withdrawn. If the ISO/PAS or ISO/TS is confirmed, i

30、t is reviewed again after a further three years, at which time it must either be transformed into an International Standard or be withdrawn. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for ide

31、ntifying any or all such patent rights. ISO/TS 25740-1 was prepared by Technical Committee ISO/TC 178, Lifts, escalators and moving walks. ISO/TS 25740 consists of the following parts, under the general title Safety requirements for escalators and moving walks: Part 1: Global essential safety requir

32、ements (GESR) Future parts will address safety parameters for escalators and moving walks. DD ISO/TS 25740-1:2011ISO/TS 25740-1:2011(E) vi ISO 2011 All rights reservedIntroduction After the publication of ISO/TR 14799-1 and ISO/TR 14799-2, discrepancies were noted in the safety standards for escalat

33、ors and moving walks. A need for the establishment of global essential safety requirements (GESR) for escalators and moving walks was identified, which resulted in the publication of ISO 14798. This methodology was a critical tool in the development of this Technical Specification on safety requirem

34、ents for escalators and moving walks. The objective of this Technical Specification is to: a) define a common global level of safety for all people using, or associated with, escalators and moving walks; b) facilitate innovation of escalators and moving walks not designed according to existing local

35、, national or regional safety standards, while maintaining equal levels of safety (if such innovations become state of the art, they can then be integrated into the detailed local safety standard at a later date); c) remove trade barriers. NOTE ISO/TS 25740-2 will contain global essential safety par

36、ameters (GESPs) for escalators and moving walks that should further assist in the use and implementation of the GESRs specified in this part of ISO/TS 25740. Clause 4 gives the approach and methodology used in the development of this part of ISO/TS 25740. Clause 5 gives instructions for the use and

37、implementation of GESRs. The GESRs are given in Clause 6. Each GESR specifies a safety objective, i.e. what is to be achieved rather than how to do it, in order to allow innovation and development of future technologies. Annex A gives an overview of GESRs in relation to subsystems of escalators and

38、moving walks. Annex B demonstrates compliance of this document with the European Directive for Machinery 2006/42/EC. This part of ISO/TS 25740 is a basic safety standard according to the principles given in ISO/IEC Guide 51. DD ISO/TS 25740-1:2011TECHNICAL SPECIFICATION ISO/TS 25740-1:2011(E) ISO 20

39、11 All rights reserved 1Safety requirements for escalators and moving walks Part 1: Global essential safety requirements (GESR) 1 Scope This part of ISO/TS 25740: specifies global essential safety requirements (GESRs) for escalators and moving walks, their components and functions, and establishes a

40、 system and provides methods for minimizing safety risks that might arise in the course of the operation and use of, or work on, escalators and moving walks. NOTE See Clause 5 regarding the use and application of this part of ISO/TS 25740. This part of ISO/TS 25740 is applicable to escalators and mo

41、ving walks that are intended to carry persons. The escalators and moving walks to which this part of ISO/TS 25740 applies can: a) be located in any permanent and fixed structure or building; b) have any 1) rated load, size of load carrying unit (LCU) and speed, and 2) travel height; c) be affected b

42、y fire in the environment of the LCU and weather conditions; d) be misused. This part of ISO/TS 25740 does not specifically cover: all needs of users with disabilities1); risks arising from work on escalators and moving walks under construction or during alterations and dismantling; vandalism; fire

43、in the environment outside the LCU. 1) Although the GESRs specified in this part of ISO/TS 25740 have been identified and evaluated by risk assessment, not all disabilities or combinations of such disabilities of users have necessarily been addressed. DD ISO/TS 25740-1:2011ISO/TS 25740-1:2011(E) 2 I

44、SO 2011 All rights reserved2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.

45、 ISO/IEC Guide 51:1999, Safety aspects Guidelines for their inclusion in standards ISO 14798, Lifts (elevators), escalators and moving walks Risk assessment and reduction methodology 3 Terms, definitions and abbreviated terms For the purposes of this document, the following terms and definitions app

46、ly. 3.1 authorized person suitably trained person with authorization to access restricted areas of escalators and moving walks (e.g. machinery spaces, separate machine rooms) and to work there for the purpose of inspection, testing and maintenance 3.2 cause circumstance, condition, event or action t

47、hat in a hazardous situation contributes to the production of an effect ISO 14798:2009, definition 2.1 3.3 control system that governs the starting, acceleration, speed, deceleration and/or stopping of the LCU 3.4 corrective action action taken to reduce risk 3.5 electromagnetic compatibility EMC de

48、gree of immunity to incident electromagnetic radiation and level of emitted electromagnetic radiation of electrical apparatus 3.6 ESR essential safety requirement requirement intended to eliminate or sufficiently mitigate the risk of harm to users, non-users, and authorized persons using or associat

49、ed with escalators and moving walks 3.7 GESR global essential safety requirement globally agreed upon essential safety requirement 3.8 harm physical injury or damage to the health of people, or damage to property or the environment ISO/IEC Guide 51:1999, definition 3.3 DD ISO/TS 25740-1:2011ISO/TS 25740-1:2011(E) ISO 2011 All rights reserved 33.9 harmful event occurrence in which a hazardous situation results in harm ISO/IEC Guide 51:1999, definition 3.4 3.10 hazard potential source of harm NOTE The term “hazard” can be