BS DD CEN TS 15844-4-2010 Postal services ID-tagging of letter mail items State encoding specification for flats《邮政服务 信件邮寄项目的ID-标签 国家为单位的编码规范》.pdf

《BS DD CEN TS 15844-4-2010 Postal services ID-tagging of letter mail items State encoding specification for flats《邮政服务 信件邮寄项目的ID-标签 国家为单位的编码规范》.pdf》由会员分享，可在线阅读，更多相关《BS DD CEN TS 15844-4-2010 Postal services ID-tagging of letter mail items State encoding specification for flats《邮政服务 信件邮寄项目的ID-标签 国家为单位的编码规范》.pdf（22页珍藏版）》请在麦多课文档分享上搜索。

1、raising standards worldwideNO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBSI Standards PublicationDD CEN/TS 15844-4:2010Postal services ID-tagging ofletter mail itemsPart 4: State encoding specification for flatsLicensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 27/05/201

2、1 02:54, Uncontrolled Copy, (c) BSIDD CEN/TS 15844-4:2010 DRAFT FOR DEVELOPMENTNational forewordThis Draft for Development is the UK implementation of CEN/TS15844-4:2010.This publication is not to be regarded as a British Standard.It is being issued in the Draft for Development series of publication

3、sand is of a provisional nature. It should be applied on thisprovisional basis, so that information and experience of its practicalapplication can be obtained.Comments arising from the use of this Draft for Developmentare requested so that UK experience can be reported to theinternational organizati

4、on responsible for its conversion toan international standard. A review of this publication willbe initiated not later than 3 years after its publication by theinternational organization so that a decision can be taken on itsstatus. Notification of the start of the review period will be made inan an

5、nouncement in the appropriate issue of Update Standards.According to the replies received by the end of the review period,the responsible BSI Committee will decide whether to support theconversion into an international Standard, to extend the life of theTechnical Specification or to withdraw it. Com

6、ments should be sentto the Secretary of the responsible BSI Technical Committee at BritishStandards House, 389 Chiswick High Road, London W4 4AL.The UK participation in its preparation was entrusted to TechnicalCommittee SVS/4, Postal services.A list of organizations represented on this committee ca

7、n beobtained on request to its secretary.This publication does not purport to include all the necessaryprovisions of a contract. Users are responsible for its correctapplication. BSI 2011ISBN 978 0 580 63259 4ICS 03.240Compliance with a British Standard cannot confer immunity fromlegal obligations.T

8、his Draft for Development was published under the authority ofthe Standards Policy and Strategy Committee on 31 January 2011.Amendments issued since publicationDate Text affectedLicensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 27/05/2011 02:54, Uncontrolled Copy, (c) BSIDD CEN/TS 15844-4:2010T

9、ECHNICAL SPECIFICATION SPCIFICATION TECHNIQUE TECHNISCHE SPEZIFIKATION CEN/TS 15844-4 December 2010 ICS 03.240 English Version Postal services - ID-tagging of letter mail items - Part 4: State encoding specification for flats Traitement automatis des envois postaux - Chronomarquage des envois postau

10、x - Partie 4: Spcification de codage en code 4 tats pour les objets plats Postalische Dienstleistungen - ID-Kennzeichnung von Briefsendungen - Teil 4: Spezifikation der Zustandscodierung fr Grobriefe This Technical Specification (CEN/TS) was approved by CEN on 1 December 2008 for provisional applica

11、tion. The period of validity of this CEN/TS is limited initially to three years. After two years the members of CEN will be requested to submit their comments, particularly on the question whether the CEN/TS can be converted into a European Standard. CEN members are required to announce the existenc

12、e of this CEN/TS in the same way as for an EN and to make the CEN/TS available promptly at national level in an appropriate form. It is permissible to keep conflicting national standards in force (in parallel to the CEN/TS) until the final decision about the possible conversion of the CEN/TS into an

13、 EN is reached. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Sl

14、ovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: Avenue Marnix 17, B-1000 Brussels 2010 CEN All rights of exploitation in any form and by any means reserved worldwi

15、de for CEN national Members. Ref. No. CEN/TS 15844-4:2010: ELicensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 27/05/2011 02:54, Uncontrolled Copy, (c) BSIDD CEN/TS 15844-4:2010CEN/TS 15844-4:2010 (E) 2 Contents Page Foreword 3Introduction .41 Scope 52 Normative references 53 Terms and definitio

16、ns .54 Symbols and abbreviations 55 Usage limitations .56 Value range limitations .67 Encoding specification .68 Printing of the bar code 88.1 General 88.2 Optical characteristics of the ink .88.3 Bar code placement .99 Reading and interpretation of Postal-4i bar codes . 1110 Conversion to the messa

17、ge and binary representations . 12Annex A (informative) Postal-4i ID-tag generator . 14Annex B (informative) Examples 16Bibliography . 18Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 27/05/2011 02:54, Uncontrolled Copy, (c) BSIDD CEN/TS 15844-4:2010CEN/TS 15844-4:2010 (E) 3 Foreword This do

18、cument (CEN/TS 15844-4:2010) has been prepared by Technical Committee CEN/TC 331 “Postal services”, the secretariat of which is held by NEN. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held resp

19、onsible for identifying any or all such patent rights. NOTE This document has been prepared by experts coming from CEN/TC 331 and UPU, under the framework of the Memorandum of Understanding between the UPU and CEN. This document, CEN/TS 15844-4, is the CEN equivalent of UPU 1)standard S18d-10. It ma

20、y be amended only after prior consultation, between CEN/TC 331 and the UPU Standards Board, in accordance with the Memorandum of Understanding between CEN and the UPU. The UPUs contribution to the document was made, by the UPU Standards Board 2)and its sub-groups, in accordance with the rules given

21、in Part V of the “General information on UPU standards“. This document forms Part 4 of a multi-part CEN/TS 15844, Postal services ID-tagging of letter-mail items. It should be read in conjunction with the main body of the specification, Part 1. The present document provides a specification of the en

22、coding of S18 ID-tags using a 4-state symbology that may be applied to flats. CEN/TS 15844-5 provides a similar specification for application to the front side of small letters. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bou

23、nd to announce this Technical Specification: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Sp

24、ain, Sweden, Switzerland and the United Kingdom. 1)The Universal Postal Union (UPU) is the specialized institution of the United Nations that regulates the universal postal service. The postal services of its 189 member countries form the largest physical distribution network in the world. Some 5 mi

25、llion postal employees working in over 660 000 post offices all over the world handle an annual total of 425 billion letters-post items in the domestic service and almost 6,7 billion in the international service. Some 4,5 billion parcels are sent by post annually. Keeping pace with the changing comm

26、unications market, posts are increasingly using new communication and information technologies to move beyond what is traditionally regarded as their core postal business. They are meeting higher customer expectations with an expanded range of products and value-added services.2)The UPUs Standards B

27、oard develops and maintains a growing number of standards to improve the exchange of postal-related information between posts, and promotes the compatibility of UPU and international postal initiatives. It works closely with posts, customers, suppliers and other partners, including various internati

28、onal organizations. The Standards Board ensures that coherent standards are developed in areas such as electronic data interchange (EDI), mail encoding, postal forms and meters. UPU standards are published in accordance with the rules given in Part VII of the General information on UPU standards, wh

29、ich may be freely downloaded from the UPU world-wide web site (www.upu.int).Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 27/05/2011 02:54, Uncontrolled Copy, (c) BSIDD CEN/TS 15844-4:2010CEN/TS 15844-4:2010 (E) 4 Introduction A general introduction to all parts of the Technical Specificati

30、on is provided in CEN/TS 15844-1. This part deals only with the encoding of ID-tags in the form of a 4-state bar code printed on the front side of flats. It is arranged under six main headings: Clause No. Description of content 5 Usage limitations: defines limitations on the use of the Postal-4i enc

31、oding of ID-tags specified in this document. 6 Value range limitations: defines limitations on the values of data elements used in ID-tags which are to be represented on flats in the form of a Postal-4i bar code. 7 Encoding specification: specifies the construction of a Postal-4i bar code from ID-ta

32、g data elements. 8 Printing of the bar code: to allow the association of computer data with a physical item, the ID-tag is printed on the item itself. This clause defines required ink and printing parameters. 9 Reading and interpretation of Postal-4i bar codes: specifies the validation and error cor

33、rection requirements associated with the reading of ID-tags represented using Postal-4i bar codes. 10 Conversion to the message and binary representations: describes the correspondence between Postal-4i bar coded representation and the binary and message interchange representations defined in CEN/TS

34、 15844-1. These are complemented by two informative annexes, the first providing references to an example implementation of the Postal-4i ID-tag generation algorithm and the second providing a number of example ID-tags, generated using this implementation. Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA

35、 STANDARDS, 27/05/2011 02:54, Uncontrolled Copy, (c) BSIDD CEN/TS 15844-4:2010CEN/TS 15844-4:2010 (E) 5 1 Scope This part of the Technical Specification defines the representation of ID-tags as a Postal-4i symbology 4-state bar code printed on the front side of flats. Many of the provisions are appl

36、icable also to small letters and are therefore referenced by Part 5 of the specification (CEN/TS 15844-5), which covers these. Postal-4i symbology 4-state encoding is the only encoding specification supported by this Technical Specification 3) for the printing of ID-tags on the front of items. NOTE

37、Representation in the form of fluorescent BNB bar codes printed on the reverse side of small letters (not flats) is covered in CEN/TS 15844-2 and CEN/TS 15844-3. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, on

38、ly the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. CEN/TS 15844-1:2010, Postal services ID-tagging of letter mail items Part 1: ID-tag structure, message and binary UPU S48, Postal-4i: 4-state symbology and its use

39、for the encoding of data on postal items 3 Terms and definitions A number of common terms used in this document are defined in the UPU Standards glossary, in documents referred to in normative references and in the bibliography. Definition of frequently used or particularly important terms as well a

40、s other terms introduced in this document are given below. See CEN/TS 15844-1:2010. 4 Symbols and abbreviations See CEN/TS 15844-1:2010. 5 Usage limitations The 4-state bar coded representation of ID-tags defined in this part of the specification is intended for use only in area F4 or F4X on the fro

41、nt side of flats; it shall not be used in area R1 on the reverse side. NOTE Usage in other areas on the front could result in interference with, or by, codes placed by other systems. Usage on the reverse side, and particularly usage in area R1, could seriously disturb the operation of older systems

42、which are designed to work only with BNB encodings of ID-tags. 3)References to “this Technical Specification“ should be interpreted as references to CEN/TS 15844 as a whole, not only to Part 4. Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 27/05/2011 02:54, Uncontrolled Copy, (c) BSIDD CEN/

43、TS 15844-4:2010CEN/TS 15844-4:2010 (E) 6 6 Value range limitations In addition to the component value limitations defined in CEN/TS 15844-1, the following limitations apply to ID-tags which are to be represented in the form of Postal-4i symbology bar codes: the format identifier is limited to the va

44、lues 18C and 18D, the choice between these being dependent on the data content of the ID-tag value (see CEN/TS 15844-1), in turn dependent on the method of ID-tag allocation: format 18C shall not be used on pre-printed labels; NOTE 1 Format 18C explicitly includes a date/time of ID-tag value generat

45、ion and is intended for use only in situations in which the ID-tag value is dynamically assigned at the time of its application to an item. Pre-printed labels might be produced long before their application to items and may therefore use only format 18D. the use of domain codes is recommended, but n

46、ot required. NOTE 2 That is, it is recommended, though not required, that users allocate equipment identifiers in such a way that the first character indicates the allocation domain, normally corresponding to the geographic region or group of postal processing facilities in which the equipment which

47、 issued the ID-tag is situated. If this is done, and the domain table published, other organisations which read the ID-tags can determine the geographic origin of the item and apply appropriate procedures to determine whether the item has suffered any exceptional delay. 7 Encoding specification The

48、bar code shall be generated in compliance with UPU standard S48, using the following parameters: 1) format code (f) value: equal to bits 0-3 of the binary ID-tag value, as defined in CEN/TS 15844-1; NOTE 1 This assists in distinguishing Postal-4i ID-tags from other bar codes which use Postal-4i symb

49、ology. See S48 for a definition of the symbology parameters f, l, r, c and n. 2) left synchronisation code (l) value : 010110 (22 decimal); 3) right synchronisation code (r) value : 100110 (38 decimal); NOTE 2 The synchronisation codes are inserted to provide known patterns, separated by a fixed number of bar positions in the final bar code, which can be used for checking synchronisation of captured bar codes. The particular binary patterns and their position have been chosen: (a) to support detection of bar code orientation and