BS CECC 30301 024-1981 Harmonized detail specification for fixed aluminium electrolytic capacitors (long-life grade) - Non-solid electrolyte - Cylindrical polar insulated metallic .pdf

《BS CECC 30301 024-1981 Harmonized detail specification for fixed aluminium electrolytic capacitors (long-life grade) - Non-solid electrolyte - Cylindrical polar insulated metallic .pdf》由会员分享，可在线阅读，更多相关《BS CECC 30301 024-1981 Harmonized detail specification for fixed aluminium electrolytic capacitors (long-life grade) - Non-solid electrolyte - Cylindrical polar insulated metallic .pdf（28页珍藏版）》请在麦多课文档分享上搜索。

1、BRITISH STANDARD BS CECC 30301 024: 1981 Incorporating Amendment No. 1 Harmonized detail specification for fixed aluminium electrolytic capacitors (long-life grade) Non-solid electrolyte Cylindrical, polar insulated metallic case, clamp or stud mounting screw terminations Full plus additional assess

2、ment level UDC 621.319.45BS CECC30301024:1981 BSI 11-1999 Committee reference ECL/4 ISBN 0 580 12022 8 A British Standard does not purport to include all the necessary provisions of a contract. Users of British Standards are responsible for their correct application. Compliance with a British Standa

3、rd does not of itself confer immunity from legal obligations. Summary of pages This document comprises a front cover, an inside front cover, pages i and ii, pages 1 to 22 and a back cover. This standard has been updated (see copyright date) and may have had amendments incorporated. This will be indi

4、cated in the amendment table on the inside front cover. Amendments issued since publication Amd. No. Date of issue Comments 3895 March 1982 Indicated by a sideline in the marginBS CECC30301024:1981 BSI 11-1999 i Contents Page 1 Dimensions 1 2 Specified method of mounting for vibration and bump testi

5、ng 2 3 Ratings and characteristics 2 4 Related documents 3 5 Marking 4 6 Ordering information 4 7 Qualification approval and quality conformance inspection 4 8 Certified test records 4 9 Constructional requirements 5 Appendix A Constructional requirements 15 Appendix B Determination of the chloride

6、and sulphate concentration of electrolytic capacitor electrolytes 17 Appendix C Flammability test: Oxygen index method 19 Figure 1 Diagrammatic representation of oxide inclusions present at the weld interface 16 Figure 2 Typical equipment layout 20 Table 1 Dimensions 1 Table 2 Capacitance and rated

7、voltage 2 Table 3 Rated values of ripple current 3 Table 4 Test schedule 5ii blankBS CECC30301024:1981 BSI 11-1999 1 1 Dimensions Table 1 Dimensions ELECTRONIC COMPONENTS OF ASSESSED QUALITY DETAIL SPECIFICATION IN ACCORDANCE WITH BS E9070 (CECC 30000):1975 BS CECC 30300 (CECC30300):1978 MANUFACTURE

8、RS TYPE NUMBER See PD 9002 or CECC 00200 For ordering information see clause 6 Outline and dimensions For marking see clause 5 First angle projection ALUMINIUM ELECTROLYTIC CAPACITORS WITH NON-SOLID ELECTROLYTE. LONG-LIFE GRADE TYPICAL CONSTRUCTION: CYLINDRICAL, POLAR, INSULATED METALLIC CASE, CLAMP

9、 (STYLE A) OR STUD (STYLE B) MOUNTING SCREW TERMINATIONS 680 4F to 150 000 4F Tolerance 10 % to + 50 % Rated voltage6.3V to160V Climatic category 25/085/56 ASSESSMENT LEVEL FULL PLUS ADDITIONAL Dimensions See Table 1 WARNING. This standard calls for the use of substances and/or test procedures that

10、may be injurious to health if adequate precautions are not taken. It refers only to technical suitability and in no way absolves either the supplier or the user from statutory obligations relating to health and safety at any stage of manufacture or use. Refer to the relevant Qualified Products List

11、PD 9002 and/or CECC 00200 for details of the availability of components qualified to this specification. Case size Dimensions (mm) 1 H max. L max. S 0.5 X T Y M N 2 A 37 70 60 12.7 5.5 M5 9.2 M8 12 B 37 100 90 12.7 5.5 M5 9.2 M8 12 C 37 135 125 12.7 5.5 M5 9.2 M8 12 D 52 100 90 22.2 5.5 M5 9.2 M12 1

12、6 E 52 135 125 22.2 5.5 M5 9.2 M12 16 F 67 135 125 28.5 5.5 M5 9.2 M12 16BS CECC30301024:1981 2 BSI 11-1999 2 Specified method of mounting for vibration and bump testing 3 Ratings and characteristics Table 2 Capacitance and rated voltage Style A : by the body (clamped) Style B : by the stud 3.1 Appl

13、ication grade Long-life use 3.2 Rated capacitance range See Table 2 3.3 Capacitance tolerance 10 % + 50 % 3.4 Rated voltage range U R See Table 2 3.5 Category voltage U C As rated voltage 3.6 Category temperature range 25 C to + 85 C 3.7 Rated temperature 85 C 3.8 Insulation resistance 100 M7 3.9 Cl

14、imatic category 25/085/56 3.10 Leakage current (0.003 CU + 4) A (see note 3) 3.11 Bump test severity 390 m/s 2 , 4 000 bumps 3.12 Vibration test severity 10 Hz to 55 Hz, 0.75 mm or 98 m/s 2 3.13 Low air pressure 8.5 kPa (85 mbar) 3.14 Maximum ripple current at 100 Hz See Table 3 3.15 Tangent of loss

15、 angle u 1.0 for U Ru 10 V u 0.5 for 25 V W U R 10 V u 0.3 for U R 25 V 3.16 Voltage proof 1 000 volts for 1 minute 3.17 Maximum impedance at 10 kHz and 20 C 0.06 7 for U Ru 63 V 0.15 7 for U R 63 V Capacitance Rated voltage U R(see note 2) 4F 6.3 10 16 25 40 63 100 160 680 B 1 000 C 1 500 B D 2 200

16、 A B C E 3 300 A C D F 4 700 A B D E 6 800 A B C E 10 000 A B C D F 15 000 B C D E F 22 000 B C D E 33 000 C D E F 47 000 D E F 68 000 E F 100 000 F 150 000 F (see note 1)BS CECC30301024:1981 BSI 11-1999 3 Table 3 Rated values of ripple current 4 Related documents BS 2011, Basic environmental testin

17、g procedures. BS E9007, Harmonized system of quality assessment for electronic components. Basic specification: sampling plans and procedures for inspection by attributes. BS E9070, Harmonized system of quality assessment for electronic components. Generic specification for fixed capacitors. BS CECC

18、 30300, Specification for harmonized system of quality assessment for electronic components. Sectional specification: aluminium electrolytic capacitors. BS CECC 30301, Specification for harmonized system of quality assessment for electronic components. Blank detail specification: aluminium electroly

19、tic capacitors with non-solid electrolyte. PD 6002, BS 9000 component selection guide. CECC 00200, Qualified products list. Capacitance value (4F) Rated voltage (V) Ripple current (A) (see note 4) Capacitance value (4F) Rated voltage (V) Ripple current (A) (see note 4) 10 000 22 000 33 000 47 000 68

20、 000 150 000 6.3 1.4 3.1 4.5 5.4 7.7 12.5 2 200 4 700 6 800 10 000 15 000 33 000 40 1.4 3.1 4.5 5.4 7.7 12.5 6 800 15 000 22 000 33 000 47 000 100 000 10 1.4 3.1 4.5 5.4 7.7 12.5 2 200 3 300 4 700 6 800 15 000 63 3.1 4.5 5.4 7.7 12.5 4 700 10 000 15 000 22 000 33 000 68 000 16 1.4 3.1 4.5 5.4 7.7 12

21、.5 1 500 2 200 3 300 4 700 10 000 100 3.1 4.5 5.4 7.7 12.5 3 300 6 800 10 000 15 000 22 000 47 000 25 1.4 3.1 4.5 5.4 7.7 12.5 680 1 000 1 500 2 200 3 300 160 1.4 1.8 2.5 4.0 5.6 NOTE 1The letters indicate case size (see Table 1). NOTE 2The capacitors may be used for any lower voltage rating. NOTE 3

22、Leakage current maximum permissible values are derived from the empirical term (0.003 CU + 4) 4A, where C is the rated capacitance of the capacitor, in 4F, and U is the rated voltage of the capacitor, in volts. The dimensions of C and U are not required in this derivation. NOTE 4The ripple currents

23、shown above are the maximum permissible values at a frequency of 100 Hz and temperature of 85 C. To obtain the ripple current rating at 50 Hz, the figure for 100 Hz is multiplied by 1/2. It should be noted that the life of a capacitor is extended by operating at lower ripple currents and low ambient

24、 temperatures. NOTE 5A capacitor may be mounted in any position, but preferably with the vent uppermost. The capacitors are not intended for mounting by their terminations only. NOTE 6Terminal screws supplied shall be of sufficient length to enable the requirements of the torque test (test Ud) to be

25、 satisfied when clamping a connection of thickness as detailed in the ordering information, clause 6.BS CECC30301024:1981 4 BSI 11-1999 5 Marking Items a) to e) shall be marked on the capacitor: a) rated capacitance in 4F; b) rated voltage and category temperature; c) polarity of the terminations; d

26、) tolerance on rated capacitance; e) long-life grade. The marking on the package shall include all the items in accordance with1.4 ofBSCECC30300:1978. 6 Ordering information When ordering capacitors in accordance with this detail specification the following information shall be given: a) manufacture

27、rs type number; b) number of this detail specification, issue number and date; c) capacitance and rated voltage; d) style; e) thickness of connection: e.g. busbar. Example Type XXXBSCECC30301024:1981 680 4F160VStyle A:5mm. 7 Qualification approval and quality conformance inspection 7.1 For qualifica

28、tion approval test and quality conformance inspection, the test schedule, severities and requirements given inTable 4 apply. 7.2 For qualification approval testing, see3.3 ofBSCECC30300:1978. Subgroups A1 and A2 are combined together to form group 0. All subgroups of group C are required with number

29、s of samples and permissible defectives as shown in Table1 ofBSCECC30300:1978. For sub-group C7, the numbers are as shown inTable 4 of this detail specification. 7.3 Case size grouping in accordance with 3.4.2 ofBSCECC30300:1978. 7.4 Voltage rating grouping in accordance with 3.4.2 ofBSCECC30300:197

30、8. 7.5 Samples submitted to tests marked D shall not be accepted for release underBSE9000. 7.6 The requirement for visual examination for intermediate or final measurement is as follows: “There shall be no damage that will affect the capability for the use for which the product was intended.” 7.7 Dr

31、ying in accordance with 4.3 ofBSE9070:1975 is not required. 7.8 In-process inspection to be applied in accordance with tests in group A0 which shall be included in the manufacturers data package. The manufacturer shall, within the data package, describe: a) For aluminium materials: 1) The requiremen

32、ts of the purchasing specification. 2) Receiving, evaluation, identification and issue procedures. b) Process control: 1) Tabs to foil/terminal weld tests. 2) Electrolyte tests. This information shall be declared by the manufacturer when seeking Qualification Approval. 8 Certified test records Certi

33、fied, test records are required in accordance withBSCECC30300.BS CECC30301024:1981 BSI 11-1999 5 9 Constructional requirements Text deleted. Table 4 Test schedule Appendix number and test D or ND Conditions of test Periodicity and sample size Inspection requirements (see note 2) GROUP A IN-PROCESS I

34、NSPECTION To be conducted on a sampling basis, lot-by-lot Sub-group A01 D A.1.1 a) Weld test (Tear) As Appendix A 2 samples to be taken twice daily from each welding head As A.1.1 a) A.2 Thickness of foils As Appendix A As A.2 Sub-group A02 D Electrolyte B.1 Chloride test As B.1 1 sample to be taken

35、 daily from storage tank u 10 10 6 Halide radicals u 10 10 6 Sulphate radicals B.2 Sulphate test As B.2 Sub-group A03 D A.1.1 b) Weld test (Visual) As Appendix A 2 samples to be taken weekly from each welding head As A.1.1 b) A.1.1 c) Weld test (Microsection) As Appendix A As A.1.1 c) Notes at the e

36、nd of Table 4.BS CECC30301024:1981 6 BSI 11-1999 Table 4 Test schedule Clause number and test (see note 1) D or ND (2) Conditions of test IL AQL % Performance requirements (see note 1) (see note 3) GROUP A INSPECTION To be conducted on a sampling basis, lot-by-lot Sub-group A1 ND S-4 2.5 4.3 Visual

37、examination No leakage of electrolyte or other visible damage Marking As clause 5 of this detail specification Legible marking 4.3 Dimensions As in Table 1 Sub-group A2 ND II 1 4.2 Preconditioning 4.4 Leakage current u (0.003 CU + 4)4A 4.5 Capacitance At 100 Hz Within specified tolerance 4.6 Tangent

38、 of loss angle At 100 Hz Not to exceed the limit in clause 3 4.7 HF impedance At 10 kHz Not to exceed the limit in clause 3 GROUP B INSPECTION To be conducted on a sampling basis, lot-by-lot Sub-group B1 ND S-3 2.5 4 Storage at upper category temperature 96 4 h at UCT Visual examination After 16 h r

39、ecovery No leakage of electrolyte or other visible damage 4.4 Leakage current u 2 the initial limit Notes at the end of Table 4.BS CECC30301024:1981 BSI 11-1999 7 Table 4 Test schedule Clause number and test (see note 1) D or ND (2) Conditions of test IL AQL % Performance requirements (see note 1) (

40、see note 3) Sub-group B1 4.5 Capacitance At 100 Hz %C u 10 % of initial measurements 4.6 Tangent of loss angle At 100 Hz u 1.2 the initial limit Sub-group B2 ND S-3 2.5 4.19 Impedance at low temperature At 100 Hz 25 C and 20 C Test A. Cold of BS 2011-2.1A The ratio of impedance at 25 C to that at 20

41、 C shall not exceed 5 for U R = 6.3 V 4 for U R 6.3 V but u 16 V 3 for U R 16 V but u 160 V Sample size and criterion of acceptability (see note 2) p n c GROUP C INSPECTION To be conducted on a sampling basis at the periodicity given in months in column p Sub-group C1 (all samples) ND Initial measur

42、ements 4.5 Capacitance At 100 Hz 6 27 1 Within the specified tolerance Notes at the end of Table 4.BS CECC30301024:1981 8 BSI 11-1999 Table 4 Test schedule Clause number and test (see note 1) D or ND (2) Conditions of test Sample size and criterion of acceptability (see note 2) Performance requireme

43、nts (see note 1) p n c Sub-group C1a (part sample) ND 6 9 4.9.2 Robustness of terminations and mounting stud Test Ua 1tensile 20 N Test Ud torque M5: 1.96 N m; M8: 4 N m; M12: 10 N m of BS 2011-2.1U 4.3 Visual examination No leakage of electrolyte or other visible damage Legible marking 4.9.4 Capaci

44、tance % C u 5 % of initial measurement Sub-group C1b (remainder of sample) D 6 18 4.10.3 Rapid change of temperature 5 cycles of 3 h at 25 C, 3 h at 85 C Recovery 16 h No leakage of electrolyte or other visible damage Visual examination (For method of mounting see clause 2.) 4.10.4 Vibration Procedu

45、re B4 of test Fc of BS 2011-2.1 Fc Frequency range 10 Hz to 55 Hz Amplitude 0.75 mm or98 m/s 2 Duration 3 h 2 h (3 mutually perpendicular planes) Visual examination No leakage of electrolyte or other visible damage Legible marking Notes at the end of Table 4.BS CECC30301024:1981 BSI 11-1999 9 Table

46、4 Test schedule Clause number and test (see note 1) D or ND (2) Conditions of test Sample size and criterion of acceptability (see note 2) Performance requirements p n c Sub-group C1 b Capacitance %C u 5 % of initial measurement in4.9.1 4.10.5 Bump Test Db 4 000 bumps total, divided equally between

47、each of 3 mutually perpendicular axes Acceleration 390 m/s 2 Final measurements Visual examination No leakage of electrolyte or other visible damage Capacitance (%C/C) u 5 % of initial measurement Sub-group C1 D 6 27 1 4.11 Climatic sequence Combined sample Dry heat 16 h, 85 C Damp heat, accelerated

48、 test Db, first cycle Severity b: 55 C Cold 2 h, 25 C Low air pressure 8.5 kPa (85 mbar) 25 10 C, 5 min U Rapplied for final minute No evidence of breakdown or flashover and no deformation of the case Damp heat, accelerated test Db, remaining cycles 5 cycles of 24 h at 55 C and 95 % to 100 % humidit

49、y Final measurements Notes at the end of Table 4.BS CECC30301024:1981 10 BSI 11-1999 Table 4 Test schedule Clause number and test (see note 1) D or ND (2) Conditions of test Sample size and criterion of acceptability (see note 2) Performance requirements (see note 1) p n c Sub-group C1 Visual examination There shall be no leakage of electrolyte or other visible damage Marking shall be legible Leakage current u (0.003 CU + 4)4A Capacitance at 100 Hz %C u 10 % of