BS AU 215-3-1988 Power take offs (PTOs) - Specification for dimensions of connections for rear mounted power take offs for commercial road vehicles《动力输出装置 第3部分 商用道路车辆安装在尾部的功率输出装置的连.pdf
《BS AU 215-3-1988 Power take offs (PTOs) - Specification for dimensions of connections for rear mounted power take offs for commercial road vehicles《动力输出装置 第3部分 商用道路车辆安装在尾部的功率输出装置的连.pdf》由会员分享,可在线阅读,更多相关《BS AU 215-3-1988 Power take offs (PTOs) - Specification for dimensions of connections for rear mounted power take offs for commercial road vehicles《动力输出装置 第3部分 商用道路车辆安装在尾部的功率输出装置的连.pdf(10页珍藏版)》请在麦多课文档分享上搜索。
1、BRITISH STANDARD AUTOMOBILE SERIES BS AU 215-3: 1988 ISO7707:1986 Power take offs (PTOs) Part3: Specification for dimensions of connections for rear mounted power take offs for commercial road vehicles ISO title: Commercial road vehicles Connections for rear-mounted power take-offs (PTO) UDC629.114.
2、4:629.113494BSAU215-3:1988 This BritishStandard, having been prepared under the directionof the Automobile Standards Committee, was published under the authority ofthe Board of BSI and comes into effect on 29 February1988 BSI01-2000 The following BSI references relate to the work on this standard: C
3、ommittee reference AUE/13 Draft for comment85/79127DC ISBN 0 580 16367 9 Committees responsible for this BritishStandard The preparation of this BritishStandard was entrusted by the Automobile Standards Committee (AUE/-) to Technical Committee AUE/13, upon which the following bodies were represented
4、: British Railways Board Department of Transport (Highways) Freight Transport Association Institute of Road Transport Engineers (Incorporated) London Regional Transport Ministry of Defence National Bus Company Road Haulage Association Ltd. Society of Motor Manufacturers and Traders Limited Amendment
5、s issued since publication Amd. No. Date of issue CommentsBSAU215-3:1988 BSI 01-2000 i Contents Page Committees responsible Inside front cover National foreword ii 1 Scope and field of application 1 2 Reference 1 3 Specifications 1 4 Designation 1 Publication referred to Inside back coverBSAU215-3:1
6、988 ii BSI 01-2000 National foreword This BritishStandard has been prepared under the direction of the Automobile Standards Committee and is identical with ISO7707:1986 “Commercial road vehicles Connections for rear-mounted power take-offs (PTO)”, published by the International Organization for Stan
7、dardization (ISO). BS AU215-1 specifies dimensions for the clearance envelope for PTOs. BSAU215-2 specifies dimensions of side openings for PTOs. Terminology and conventions. The text of the InternationalStandard has been approved as suitable for publication as a BritishStandard without deviation. S
8、ome terminology and certain conventions are not identical with those used in BritishStandards; attention is drawn especially to the following. The comma has been used as a decimal marker. In BritishStandards it is current practice to use a full point on the baseline as the decimal marker. Wherever t
9、he words “International Standard” or “ISO7707” appear, referring to this standard, they should be read as “BritishStandard” and “BS AU215-3” respectively. A British Standard does not purport to include all the necessary provisions of a contract. Users of British Standards are responsible for their c
10、orrect application. Compliance with a British Standard does not of itself confer immunity from legal obligations. Cross-reference International Standard Corresponding BritishStandard ISO7706:1985 BS AU215 Power take offs (PTOs) Part1:1987 Specification for dimensions for clearance envelope for comme
11、rcial road vehicles (Identical) Summary of pages This document comprises a front cover, an inside front cover, pagesi andii, pages1 to4, an inside back cover and a back cover. This standard has been updated (see copyright date) and may have had amendments incorporated. This will be indicated in the
- 1.请仔细阅读文档,确保文档完整性,对于不预览、不比对内容而直接下载带来的问题本站不予受理。
- 2.下载的文档,不会出现我们的网址水印。
- 3、该文档所得收入(下载+内容+预览)归上传者、原创作者;如果您是本文档原作者,请点此认领!既往收益都归您。
下载文档到电脑,查找使用更方便
10000 积分 0人已下载
下载 | 加入VIP,交流精品资源 |
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- BSAU21531988POWERTAKEOFFSPTOSSPECIFICATIONFORDIMENSIONSOFCONNECTIONSFORREARMOUNTEDPOWERTAKEOFFSFORCOMMERCIALROADVEHICLES
![提示](http://www.mydoc123.com/images/bang_tan.gif)
链接地址:http://www.mydoc123.com/p-547801.html