BS 8887-220-2010 Design for manufacture assembly disassembly and end-of-life processing (MADE) - The process of remanufacture - Specification《制造、组装、拆卸和消毁过程(MADE)的设计 再改造过程 规范》.pdf

《BS 8887-220-2010 Design for manufacture assembly disassembly and end-of-life processing (MADE) - The process of remanufacture - Specification《制造、组装、拆卸和消毁过程(MADE)的设计 再改造过程 规范》.pdf》由会员分享，可在线阅读，更多相关《BS 8887-220-2010 Design for manufacture assembly disassembly and end-of-life processing (MADE) - The process of remanufacture - Specification《制造、组装、拆卸和消毁过程(MADE)的设计 再改造过程 规范》.pdf（12页珍藏版）》请在麦多课文档分享上搜索。

1、raising standards worldwideNO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBSI Standards PublicationDesign for manufacture, assembly, disassembly and endoflife processing (MADE)Part 220: The process of remanufacture SpecificationBS 888722nullnull2nullnullnullBS 8887-220:2010 BR

2、ITISH STANDARDnullublisnulling and copyrignullt informationThe BSI copyright notice displayed in this docnullnullent indicates nullhen the docnullnullent nullas last issnullednullnull BSI 2010ISBN null78 0 null80 null8null08 nullInullS 01null0null0null01null 01null100null01The nullollonulling BSI re

3、nullerences relate to the nullornull on this standard: nullonullnullittee renullerence TDnullnullnull Dranullt nullor conullnullent 0nullnullnull020null8null8 Dnullnullublication nullistorynullirst pnullnulllished nullarch 2010Amendments issued since publicationDate nullenullt affected BRITISH STAND

4、ARDnull BSI 2010 null iBS 8887-220:2010nullontentsnullorenullord iinull Introdnullction 1null Scope 12 Nornullatinulle renullerences 1null Ternulls and denullnitions 2null The renullannullnullactnullring process 2null Identinullcation and nullarnulling 4Binullliography 5nullist of nullguresnullignul

5、lre 1 null nullrodnullct linullecycle 1Summary of pagesThis docnullnullent conullprises a nullront conullernull an inside nullront conullernull pages i to iinull pages 1 to nullnull an inside nullacnull conuller and a nullacnull conullernullBS 8887-220:2010ii null null BSI 2010BRITISH STANDARDnullor

6、enullordnullublisnulling informationThis British Standard is pnullnulllished nully BSI and canulle into enullnullect on null1 nullarch 2010null It nullas prepared nully Snullnullconullnullittee TDnullnullnullnull7null BS 8887 Design for MADE nullnder the anullthority onull Technical nullonullnullitt

7、ee TDnullnullnullnullTechnical product realizationnull A list onull organinullations represented on this conullnullittee can nulle onulltained on renullnullest to its secretarynullnullelationsnullip nullitnull otnuller publicationsBS 8887 is pnullnulllished in a nnullnullnuller onull partsnull incln

8、ullding:null Part 1null nulleneral conceptsnull processes and renulluirenullentsnullnull Part 2null Ternulls and denullnitionsnullnullnformation about tnullis documentDocnullnullents nnullnullnullered nullart 1 to nullart nullnull are general nullADnull standardsnullDocnullnullents nnullnullnullered

9、 nullart 100 to nullart 1nullnull are related to nullannullnullactnullre and assenullnulllynull Docnullnullents nnullnullnullered nullart 200 to nullart 2nullnull are related to disassenullnullly and end-onull-linullenullnullresentational connullentionsThe pronullisions onull this standard are prese

10、nted in ronullan nullinullenull nullprightnulltypenull Its renullnullirenullents are enullpressed in sentences in nullhich the principal anullnulliliary nullernull is nullshallnullnullnullonullnullentarnullnull enullplanation and general infornullatinulle nullaterial is presented in snullaller itali

11、c tnullpenull and does not constitute a nornullatinulle elenullentnullnullontractual and legal considerationsThis pnullnulllication does not pnullrport to inclnullde all the necessary pronullisions onull a contractnull nullsers are responsinullle nullor its correct applicationnullnullompliance nulli

12、tnull a Britisnull Standard cannot confer immunity from legal obligationsnullBRITISH STANDARDnull BSI 2010 null 1BS 8887-220:2010null nullntroductionThis part onull BS 8887 deals nullith renullannullnullactnullre and shonullld nulle read in connullnullnction nullith BS 8887-2 as nullell as nullignul

13、lre 1nullnullignullre 1 nullroduct lifecyclenullnullTE The linullelnull change in nullarrantnull lenullel conullpared to the original products is ginullen in parenthesesnullnull ScopeThis part onull BS 8887 specinulles renullnullirenullents nullor the process onullrenullannullnullactnullre and the s

14、teps renullnullired to change a nullsed prodnullct into an as-nenull prodnullctnull nullith at least enullnullinullalent pernullornullance and nullarranty onulla conullparanullle nenull replacenullent prodnullctnull The renullannullnullactnullring process can inclnullde parts or conullponents to nul

15、le nullsed in snullnullsenullnullent assenullnulllynullThis part onull BS 8887 is applicanullle to nullannullnullactnullred prodnullctsnull It is not applicanullle to:null certain transient prodnullcts or consnullnullanullles nullenullgnull nulloodnull nullnullelnullnullnull digital nulledianull orn

16、ull conullnullodity nullaterials nullenullgnull nullase chenullical snullnullstancesnull sand or nullineralsnullnull2 nullormatinulle referencesThe nullollonulling renullerenced docnullnullents are indispensanullle nullor the application onull this docnullnullentnull nullor dated renullerencesnull o

17、nly the edition cited appliesnull nullor nullndated renullerencesnull the latest edition onull the renullerenced docnullnullent nullinclnullding any anullendnullentsnull appliesnullBS 8887-2:200null: Design for nullanufacturenull assenullnulllnullnull disassenullnulllnull and endnullofnulllife proce

18、ssing nullMADEnull null Part 2null Ternulls and denullnitionsBS 8887-220:20102 null null BSI 2010BRITISH STANDARDnull nullerms and denullnitionsnullor the pnullrposes onull this British Standardnull the ternulls and denullnitions ginullen in BS 8887-2 and the nullollonulling applynullnullnullnull co

19、reconullponent or prodnullct retained thronullghonullt the renullannullnullactnullring processnullnullTE 1 nullore is generallnull onulltained either as a discrete unit or as a conullponent or sunullconullponent of a larger productnull Acnulluiring core nullaries fronull sector to sector nullut can

20、include nullarrantnull returned partsnull user sendnullnullacnull schenullesnull collection through sernullicersnull repairers or nullronullersnullrenullonullal fronull larger scrapped productsnull part enullchangesnull deposit returnsnullsernullice contracts and reconullernull fronull nullaste stre

21、anullsnull nullore can also nulle onulltained fronull custonullers nullho nullish to hanulle nullornull perfornulled on their specinullc product nullith the enullpectation of receinulling the sanulle product nullacnullnullnullnullTE 2 The denullnition of core is dependent on the condition of its ass

22、enullnulllies and conullponentsnull enullgnull nullnullings are not necessarilnull part of the corenullnullnull2 product article nullannullnullactnullred nullor nullsenull sale or lease nullnullTE This denullnition solelnull applies to nullanufactured products and not the nullroader denullnition nul

23、lincluding sernullicesnull as denullned innull enullgnullBS nullSnull 14null5nullnull2nullnullnullnull 6.2nullnull nullnulle remanufacturing processnullnullnull nullollection of tecnullnical documents nullor renullannullnullactnullrenull technical specinullcations shall nulle onulltained or prodnull

24、ced nullor the prodnullct to snullnullstantiate the nullarranty and the enullnullinullalent as-nenull pernullornullancenullnullnullTE nullhere possinulllenull technical specinullcations should nulle produced fronull the original specinullcationsnull nullhere these are not anullailanulllenull technic

25、al specinullcations can nulle derinulled fronull a nullustinullanullle renullerse engineering process or fronull a conullpannull or industrnull standardnullnullnull2 nullollection of coreThe core shall nulle nullsed thronullgh at least part onull one linulle cyclenull It shall nulle prodnullced in a

26、ccordance nullith the original enullnullipnullent nullannullnullactnullrernulls nullnullnullnullnullsnull nullnullality control process and shall hanulle passed this processnullThe core shall nulle considered nullsed and eliginullle nullor renullannullnullactnullre nullhen it has:null nulleen placed

27、 on the nullarnulletnullnull spent tinulle in sernullicenullnull enullceeded its shelnull linullenull ornull nulleen danullaged anullter prodnullction nullnullt prior to salenull enullgnull dnullring transitnullnullnullnull nullnitial inspectionAnullter onulltaining the corenull an initial inspectio

28、n shall nulle pernullornulled against denullned acceptance criteria to deternulline inull it is snullitanullle nullor renullannullnullactnullrenullBRITISH STANDARDnull BSI 2010 null nullBS 8887-220:2010nullnullTE 1 Acceptance criteria can include econonullic and practical considerationsnullnullnullT

29、E 2 nullnspection can nulle perfornulled nullisuallnullnull or nullnull a geonulletric or perfornullance nulleasurenullentnullnullnullTE null nulltenulls nullhich fail the inspection should nulle considered for refurnullishnullent or repairnull or disposed of in an ennullironnullentallnull conscious

30、 nullannernull nullailed core can contain conullponents nullhich are suitanullle for reuse in other products and nullarrant renullonullal fronull the failed productnullnullnullTE 4 Sonulle cleaning nullight nulle necessarnull prior to testing and inspectionnullThis should nulle perfornulled nullefor

31、e inspection to ensure that sunullstandard parts are not passed as nullt for purposenullnullnullnull DisassemblyThe core shall nulle disassenullnullled into its constitnullent nullaterials andnullor conullponentsnullnullnullTE The lenullel of disassenullnulllnull can nullarnull depending on the prod

32、uct and the processes to nulle usednullnullnullnull Detailed inspection of componentsThe constitnullent conullponents shall nulle inspected to deternulline their snullitanullility nullor continnulling nullsenull nullonullponents nullhich are nullnsnullitanullle shall nulle renullonulled nullronull t

33、he renullannullnullactnullre process or nullnullnctionally renullediated nullsee nullnullnullnullnullnullnullnullnullTE nullnspection can nulle perfornulled nullisuallnullnull or nullnull a geonulletric or perfornullance nulleasurenullentnullnullnullnull nullemediation of componentsnullnullnullnulln

34、ull nullunctional remediation of componentsRenullediation shall nulle pernullornulled to ensnullre that the conullponents nulleet specinulled as-nenull pernullornullance criterianull nullonullponents nullhich hanulle nullndergone signinullcant renullediation shall nulle inspected in accordance nulli

35、th nullnullnull andnull nullhere applicanulllenull nullndergo a nullnullnctional test to ensnullre that they are onull an as-nenull nullnullalitynullnullnullTE 1 A functional test can include operating the conullponent under nornullal conditions nullhich can renulluire incorporation into a larger as

36、senullnulllnulland conullparing its output nullith that of a nenull conullponentnullnullnullTE 2 nullenullediation can include cleaningnull strippingnull repainting and resurfacingnull nullenullediation can also inullpronulle the nullnish of nullear surfacesnull enullgnullnullnull nullapour phase de

37、position or resnullinullnullingnullnullnullnullnull2 nullosmetic remediation of componentsnullosnulletic partsnull snullch as cases and snullrnullace panelsnull shall nulle treated to ensnullre that the nullnish onull the renullannullnullactnullred prodnullctnull nullronull a cnullstonullernulls per

38、spectinullenull is considered nenullnull Both nullnullnctional and cosnulletic conullponents shall nulle as-nenullnull as denullned in BS 8887-2:200nullnull nullnullnullnullnullnull7 nulleplacement nullonullponents nullhichnull enullen anullter nullnullnctional renullediationnull do not pernullornul

39、las nenull shall nulle replaced nullith as-nenull conullponentsnull nullriginal pernullornullance and linulletinulle specinullcations shall nulle nullsed to identinully snullch partsnullBS 8887-220:2010null null null BSI 2010BRITISH STANDARDnullnull8 nulleassemblyAny reassenullnullly shall nulle per

40、nullornullednull and any consnullnullanullles shall nulle replaced or replenished nullith itenulls that are nenull or as-nenullnullnullnullnull nullesting nullnullnullnullnull nullalidating tnulle remanufacturing process The prodnullct shall nullndergo nullnullll nullornulling testsnull as descrinul

41、led in the technical docnullnullentsnull denullned in nullnullnullnull to checnull that the pernullornullance onull the prodnullct is at least enullnullal to that onull a nenull prodnullctnull These test procednullres and resnulllts shall nulle recorded nullor anullditing pnullrposesnullnullnullnull

42、null2 nullalidating tnulle remanufactured productThe renullannullnullactnullred prodnullct or nullatches onull prodnullct shall nullndergo an appropriate lenullel onull testing consistent nullith recogninulled nullnullality procednullresnullnullnullnullnull nullssue of a nullarrantyThe renullannulln

43、ullactnullred prodnullct shall nulle conullered nully a nullarranty that nullatches or enullceeds that onull a nenull prodnullctnullnull nulldentinullcation and marnullingInull desiranullle a renullannullnullactnullred prodnullct connullornulling to this standard shall nulle pernullanentlynull legin

44、ullly nullarnulled nullithnull or inclnullde docnullnullentation that containsnull one or nullore onull the nullollonulling:anull the designation and year onull this standardnull inullenull BS 8887-220:20101nullnullnullnull a nullninullnulle identinuller nullor the prodnullct nullenullgnull the prod

45、nullct nanulle andnullor typenullnullcnull the nanulle onull the renullannullnullactnullrernull1nullnullarnulling BS 8887-220:2010 on or in relation to a prodnullct represents a nullannullnullactnullrernulls declaration onull connullornullitynull inullenull a clainull nully or on nullehalnull onull

46、the nullannullnullactnullrer that the prodnullct nulleets the renullnullirenullents onull the standardnull The accnullracy onull the clainull is solely the clainullantnulls responsinullilitynull Snullch a declaration is not to nulle connullnullsed nullith third-party certinullcation onull connullorn

47、ullitynullBRITISH STANDARDnull BSI 2010 null nullBS 8887-220:2010Bibliograpnullynullor dated renullerencesnull only the edition cited appliesnull nullor nullndated renullerencesnull the latest edition onull the renullerenced docnullnullent nullinclnullding any anullendnullentsnull appliesnullBS 8887

48、-1null Design for nullanufacturenull assenullnulllnullnull disassenullnulllnull and endnullofnulllife processing nullMADEnullnull Part 1 null nulleneral conceptsnull processes and renulluirenullents 2nullBS ISnull 1null0null0:200nullnull Ennullironnullental nullanagenullent null nullocanullularnull2

49、nullRenullerred to in the nullorenullord onlynullBS 8887-220:2010null null null BSI 2010BRITISH STANDARDThis page delinulleratelnull left nulllannullThis page deliberately left blankBSI is the independent national body responsible for preparing British Standards. It presents the UK view on standards in Europe and at the international level. It is incorporated by Royal Charter.British Standards Institution (BSI)raising standards worldwideBSI Group Headquarters389 Chiswick High Road London W4 4AL UKTel +44 (0)20 8996 9001Fax +44 (0)20 8996 St