BS 822-6-2004 Terminal markings for electrical machinery and apparatus - Lead colours for rotating electrical machinery《电机和电器的终端标记 旋转电机的铅色》.pdf

《BS 822-6-2004 Terminal markings for electrical machinery and apparatus - Lead colours for rotating electrical machinery《电机和电器的终端标记 旋转电机的铅色》.pdf》由会员分享，可在线阅读，更多相关《BS 822-6-2004 Terminal markings for electrical machinery and apparatus - Lead colours for rotating electrical machinery《电机和电器的终端标记 旋转电机的铅色》.pdf（12页珍藏版）》请在麦多课文档分享上搜索。

1、BRITISH STANDARD BS 822-6:2004 Terminal markings for electrical machinery and apparatus Part 6: Lead colours for rotating electrical machinery ICS 01.070; 29.160.01 BS 822-6:2004 This British Standard was published under the authority of the Standards Policy and Strategy Committee on 19 April 2004 B

2、SI 19 April 2004 First published as part of BS 822 December 1938 Second edition as BS 822-6 May 1964 Third edition April 2004 The following BSI reference relates to the work on this British Standard: Committee reference PEL/2 ISBN 0 580 43584 9 Committees responsible for this British Standard The pr

3、eparation of this British Standard was entrusted to Technical Committee PEL/2, Rotating electrical machinery, upon which the following bodies were represented: Association of Consulting Engineers Association of Electrical and Mechanical Trades Association of Manufacturers of Power Generating Systems

4、 Electrical Insulation Association Electricity Association GAMBICA Association Limited Institution of Incorporated Executive Engineers Ministry of Defence UK Defence Standardization Rotating Electrical Machines Association (BEAMA Ltd.) Society of Operations Engineers UK Offshore Operators Associatio

5、n Limited Amendments issued since publication Amd. No. Date CommentsBS 822-6:2004 BSI 19 April 2004 i Contents Page Committees responsible Inside front cover Foreword ii 1S c o p e 1 2 A.C. generators and motors 1 3 D.C. generators and motors 2 Bibliography 7 Figure 1 Single-phase winding, both ends

6、 of phase winding and auxiliary winding brought out 3 Figure 2 Permanently-connected single-phase main and auxiliary windings 3 Figure 3 Two-terminal, single-phase machine 3 Figure 4 Three-phase winding, permanently delta-connected 4 Figure 5 Three-phase winding, permanently star-connected 4 Figure

7、6 Three-phase winding, both ends of each phase bought out 4 Figure 7 Armature, shunt and series windings 5 Figure 8 Armature, shunt, series and compole windings 5 Figure 9 Two lead d.c. machine 5BS 822-6:2004 ii BSI 19 April 2004 Foreword This part of BS 822 has been prepared by Technical Committee

8、PEL/2. Together with BS EN 60034-8:2002, it supersedes BS 822-6:1964 which is withdrawn. The 1964 edition of BS 822-6 gave terminal markings and loose lead colours to be used in small-power rotating electrical machines. BS EN 60034-8:2002 now specifies terminal markings for all rotating electrical m

9、achines. Consequently, in this new edition of BS 822-6 all text relating to terminal marking has been deleted and only the colour code for loose lead identification has been retained. This publication does not purport to include all the necessary provisions of a contract. Users are responsible for i

10、ts correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. Summary of pages This document comprises a front cover, an inside front cover, pages i and ii, pages 1 to 7 and a back cover. The BSI copyright notice displayed throughout this docum

11、ent indicates when the document was last issued.BS 822-6:2004 BSI 19 April 2004 1 1 Scope This standard applies to small-power electric motors and generators, both a.c. and d.c., that are supplied with loose leads and without terminals. It details lead colours to be used when the leads are identifie

12、d by their colour. 2 A.C. generators and motors The colour marking of leads given in this clause may be used as an alternative or in addition to the use of symbols. This is particularly applicable to machines conforming to BS 5000-11, when they are fitted with loose leads. The lead colours to be use

13、d are as follows. NOTE The symbols, which are in accordance with BS EN 60034-8:2002, are those which would be applicable if terminals were provided. a) Single-phase 4-lead (see Figure 1) b) Single-phase 3-lead (see Figure 2) c) Single-phase 2-lead (see Figure 3) d) 3-phase 3-lead (see Figure 4 and F

14、igure 5) e) 3-phase 6-lead (see Figure 6) U1 Red Z1 Yellow U2 Black Z2 Blue U1 Red Z Yellow U2 Black U1 Red or Black U2 Black UR e d WB l u e VY e l l o w U1 Red V2 Brown U2 Black W1 Blue V1 Yellow W2 WhiteBS 822-6:2004 2 BSI 19 April 2004 3 D.C. generators and motors The colour marking of leads giv

15、en in this clause may be used as an alternative or in addition to the use of symbols. This is particularly applicable to machines conforming to BS 5000-11, when they are fitted with loose leads. The lead colours to be used are as follows. NOTE The symbols, which are in accordance with BS EN 60034-8:

16、2002, are those which would be applicable if terminals were provided. a) Where all the leads are brought out (see Figure 7 and Figure 8) Armature (including compoles, where fitted) Series field Shunt field b) Where only two leads are brought out (see Figure 9) A1 Red A2 Black B1 Yellow B2 Brown F1 W

17、hite F2 Blue A1 Red or Black A2 BlackBS 822-6:2004 BSI 19 April 2004 3 Figure 1 Single-phase winding, both ends of phase winding and auxiliary winding brought out Figure 2 Permanently-connected single-phase main and auxiliary windings Figure 3 Two-terminal, single-phase machine U1 U2 Z2 Z1 U1 U2 Z U

18、1 U2BS 822-6:2004 4 BSI 19 April 2004 Figure 4 Three-phase winding, permanently delta-connected Figure 5 Three-phase winding, permanently star-connecteda) Star b) Delta Figure 6 Three-phase winding, both ends of each phase bought out W V U W V U U1 W2 W1 U2 V2 V1 W1 U2 V1 V2 W2 U1BS 822-6:2004 BSI 1

19、9 April 2004 5 Figure 7 Armature, shunt and series windings Figure 8 Armature, shunt, series and compole windings (The series windings may be disposed each side of the armature.) a) Shunt winding b) Series winding (Series coils may be disposed on each side of armature.) Figure 9 Two lead d.c. machin

20、e F1 A1 A2 B1 B2 F2 Shunt Series F1 A1 A2 F2 Shunt Series Compole A1 A2 A1 A26 blankBS 822-6:2004 BSI 19 April 2004 7 Bibliography BS 5000-11:1973, Specification for rotating electrical machines of particular types or for particular applications Part 11: Small-power electric motors and generators.BS

21、 822-6:2004 BSI 389 Chiswick High Road London W4 4AL BSI British Standards Institution BSI is the independent national body responsible for preparing British Standards. It presents the UK view on standards in Europe and at the international level. It is incorporated by Royal Charter. Revisions Briti

22、sh Standards are updated by amendment or revision. Users of British Standards should make sure that they possess the latest amendments or editions. It is the constant aim of BSI to improve the quality of our products and services. We would be grateful if anyone finding an inaccuracy or ambiguity whi

23、le using this British Standard would inform the Secretary of the technical committee responsible, the identity of which can be found on the inside front cover. Tel: +44 (0)20 8996 9000. Fax: +44 (0)20 8996 7400. BSI offers members an individual updating service called PLUS which ensures that subscri

24、bers automatically receive the latest editions of standards. Buying standards Orders for all BSI, international and foreign standards publications should be addressed to Customer Services. Tel: +44 (0)20 8996 9001. Fax: +44 (0)20 8996 7001. Email: ordersbsi-. Standards are also available from the BS

25、I website at http:/www.bsi-. In response to orders for international standards, it is BSI policy to supply the BSI implementation of those that have been published as British Standards, unless otherwise requested. Information on standards BSI provides a wide range of information on national, Europea

26、n and international standards through its Library and its Technical Help to Exporters Service. Various BSI electronic information services are also available which give details on all its products and services. Contact the Information Centre. Tel: +44 (0)20 8996 7111. Fax: +44 (0)20 8996 7048. Email

27、: infobsi-. Subscribing members of BSI are kept up to date with standards developments and receive substantial discounts on the purchase price of standards. For details of these and other benefits contact Membership Administration. Tel: +44 (0)20 8996 7002. Fax: +44 (0)20 8996 7001. Email: membershi

28、pbsi-. Information regarding online access to British Standards via British Standards Online can be found at http:/www.bsi- Further information about BSI is available on the BSI website at http:/www.bsi-. Copyright Copyright subsists in all BSI publications. BSI also holds the copyright, in the UK,

29、of the publications of the international standardization bodies. Except as permitted under the Copyright, Designs and Patents Act 1988 no extract may be reproduced, stored in a retrieval system or transmitted in any form or by any means electronic, photocopying, recording or otherwise without prior

30、written permission from BSI. This does not preclude the free use, in the course of implementing the standard, of necessary details such as symbols, and size, type or grade designations. If these details are to be used for any other purpose than implementation then the prior written permission of BSI must be obtained. Details and advice can be obtained from the Copyright & Licensing Manager. Tel: +44 (0)20 8996 7070. Fax: +44 (0)20 8996 7553. Email: copyrightbsi-.