BS 7012-13-1997 Light microscopes - Interfacing connection for 35 mm SLR photo cameras (T-thread adaptation)《光学显微镜 35mm 单镜头反射照相机用接口连接器(T型螺纹匹配)》.pdf

《BS 7012-13-1997 Light microscopes - Interfacing connection for 35 mm SLR photo cameras (T-thread adaptation)《光学显微镜 35mm 单镜头反射照相机用接口连接器(T型螺纹匹配)》.pdf》由会员分享，可在线阅读，更多相关《BS 7012-13-1997 Light microscopes - Interfacing connection for 35 mm SLR photo cameras (T-thread adaptation)《光学显微镜 35mm 单镜头反射照相机用接口连接器(T型螺纹匹配)》.pdf（12页珍藏版）》请在麦多课文档分享上搜索。

1、BRITISH STANDARD BS 7012-13: 1997 ISO 11882: 1997 Light Microscopes Part 13: Interfacing connection for35mm SLR photo cameras (T-thread adaptation) ICS 37.020BS7012-13:1997 This British Standard, having been prepared under the directionof the Sector Board forMaterials and Chemicals, waspublished und

2、er the authorityof the Standards Boardand comes into effect on 15August1997 BSI 09-1999 ISBN 0 580 27854 9 National foreword This part of BS7012 has been prepared by Technical Committee LBI/33 Microscopes. It is identical with ISO11882:1997 Optics and optical instruments Microscopes Interfacing conn

3、ection for35 mm SLR photo cameras (T-thread adaptation) published by the International Organization for Standardization (ISO). A list of organizations represented on this committee can be obtained on request to its secretary. Cross-references The British Standards which implement international or Eu

4、ropean publications referred to in this document may be found in the BSI Standards Catalogue under the section entitled “International Standards Correspondence Index”, or using the “Find” facility of the BSI Standards Electronic Catalogue. A British Standard does not purport to include all the neces

5、sary provisions of a contract. Users of British Standards are responsible for their correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. Summary of pages This document comprises a front cover, an inside front cover, pages i and ii, theISO

6、 title page, pages ii to iv, pages1 and2 and a back cover. This standard has been updated (see copyright date) and may have had amendments incorporated. This will be indicated in the amendment table on the inside front cover. Amendments issued since publication Amd. No. Date CommentsBS7012-13:1997 B

7、SI 09-1999 i Contents Page National foreword Inside front cover Foreword iii Text of ISO 11882 1ii blankBS7012-13:1997 ii BSI 09-1999 Contents Page Foreword iii 1 Scope 1 2 Requirements 1 3 Fitting arrangement for a 35 mm SLR photo camera 1 Figure 1 1 Figure 2 2 Descriptors: Optics, optical equipmen

8、t, microscopes, optical microscopes, fittings, cameras, interfaces, dimensions, connecting dimensions.BS7012-13:1997 BSI 09-1999 iii Foreword ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing Int

9、ernational Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison w

10、ith ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization. Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as

11、an International Standard requires approval by at least75% of the member bodies casting a vote. International Standard ISO11882 was prepared by Technical Committee ISO/TC172, Optics and optical instruments, Subcommittee SC 5, Microscopes and endoscopes.iv blankBS7012-13:1997 BSI 09-1999 1 1 Scope Th

12、is International Standard gives specifications for the photo exit port of microscopes for connecting35mm single-lens reflecting (SLR) photo cameras (T-thread adaptation), without the associated35mm camera lens, with reference to the projected microscope image plane. The adaptation of the35mm SLR pho

13、to cameras is obtained using camera-specific adapters which are not included in the scope of this International Standard. 2 Requirements The connecting dimensions of the35mm SLR photo camera interface shall be as shown inFigure 1. 3 Fitting arrangement for a35mm SLR photo camera The fitting arrangem

14、ent for a35mm SLR photo camera with an intermediate mechanical adapter shall be as shown inFigure 2. Figure 1 BS7012-13:1997 2 BSI 09-1999 Figure 2 3 blankBS 7012-13: 1997 ISO 11882: 1997 BSI 389 Chiswick High Road London W4 4AL BSIBritishStandardsInstitution BSI is the independent national body res

15、ponsible for preparing BritishStandards. It presents the UK view on standards in Europe and at the international level. It is incorporated by Royal Charter. Revisions BritishStandards are updated by amendment or revision. Users of BritishStandards should make sure that they possess the latest amendm

16、ents or editions. It is the constant aim of BSI to improve the quality of our products and services. We would be grateful if anyone finding an inaccuracy or ambiguity while using this BritishStandard would inform the Secretary of the technical committee responsible, the identity of which can be foun

17、d on the inside front cover. Tel:02089969000. Fax:02089967400. BSI offers members an individual updating service called PLUS which ensures that subscribers automatically receive the latest editions of standards. Buying standards Orders for all BSI, international and foreign standards publications sh

18、ould be addressed to Customer Services. Tel:02089969001. Fax:02089967001. In response to orders for international standards, it is BSI policy to supply the BSI implementation of those that have been published as BritishStandards, unless otherwise requested. Information on standards BSI provides a wi

19、de range of information on national, European and international standards through its Library and its Technical Help to Exporters Service. Various BSI electronic information services are also available which give details on all its products and services. Contact the Information Centre. Tel:020899671

20、11. Fax:02089967048. Subscribing members of BSI are kept up to date with standards developments and receive substantial discounts on the purchase price of standards. For details of these and other benefits contact Membership Administration. Tel:02089967002. Fax:02089967001. Copyright Copyright subsi

21、sts in all BSI publications. BSI also holds the copyright, in the UK, of the publications of the internationalstandardization bodies. Except as permitted under the Copyright, Designs and Patents Act 1988 no extract may be reproduced, stored in a retrieval system or transmitted in any form or by any

22、means electronic, photocopying, recording or otherwise without prior written permission from BSI. This does not preclude the free use, in the course of implementing the standard, of necessary details such as symbols, and size, type or grade designations. If these details are to be used for any other purpose than implementation then the prior written permission of BSI must be obtained. If permission is granted, the terms may include royalty payments or a licensing agreement. Details and advice can be obtained from the Copyright Manager. Tel:02089967070.