BS 6600-1-1987 Outline dimensions of transformers and inductors for use in telecommunication and electronic equipment - Specification for the outline dimensions of transformers and.pdf

《BS 6600-1-1987 Outline dimensions of transformers and inductors for use in telecommunication and electronic equipment - Specification for the outline dimensions of transformers and.pdf》由会员分享，可在线阅读，更多相关《BS 6600-1-1987 Outline dimensions of transformers and inductors for use in telecommunication and electronic equipment - Specification for the outline dimensions of transformers and.pdf（16页珍藏版）》请在麦多课文档分享上搜索。

1、BRITISH STANDARD BS 6600-1: 1987 Outline dimensions of transformers and inductors for use in telecommunication and electronic equipment Part 1: Specification for the outline dimensions of transformers and inductors using YEI-1 laminations UDC 621.314.1/.2+621.318.43.041.1:621.38/.39BS6600-1:1987 Thi

2、s British Standard, having been prepared under the directionof the Electronic Components Standards Committee, was published underthe authority of the BoardofBSI and comes into effect on 31July1987 BSI 01-2000 The following BSI references relate to the work on this standard: Committee referenceECL/18

3、 Draft for comment84/29808DC alternative designs are permissible within the specified dimensions. NOTE 3Where terminals are required, the dimensions will increase accordingly. NOTE 4The aspect ratio of the fixing slots (length:width) should be not less than15:1. NOTE 5Dimensions “D” denote positions

4、 of mounting holes. Figure 4 Frame mounting style for laminations YEI1-22 to YEI1-80BS6600-1:1987 BSI 01-2000 9 Table IV Dimensions for frame mounting style Core designation S nom A max B max C max D 1 IT12 D 2 IT12 D 3 IT12 G max G min (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) YEI 1-22 c 18 72 6

5、1 49 50 38 34 4.5 4.3 1-22 d 22 53 38 1-22 e 28 59 44 1-22 f 35 66 51 YEI 1-25 c 20 81 69 55 56 43 38 4.5 4.3 1-25 d 25 60 43 1-25 e 31 66 49 1-25 f 40 75 58 YEI 1-28 d 28 90 76 67 63 49 47 4.5 4.3 1-28 e 35 74 54 1-28 f 45 84 64 1-28 g 56 95 75 YEI 1-32 d 32 103 87 77 72 56 56 5.5 5.3 1-32 e 40 85

6、64 1-32 f 51 96 75 1-32 g 64 109 88 YEI 1-36 d 36 115 97 86 84 63 61 5.5 5.3 1-36 e 45 95 70 1-36 f 58 108 83 1-36 g 72 122 97 YEI 1-40 d 40 127 107 96 90 70 67 6.7 6.4 1-40 e 50 106 77 1-40 f 64 120 91 1-40 g 80 136 107 YEI 1-50 d 50 160 136 120 112 87 80 8.7 8.4 1-50 e 63 133 93 1-50 f 80 150 110

7、1-50 g 100 170 130 YEI 1-64 d a 64 203 171 149 144 112 100 10.9 10.5 1-64 e 80 165 116 1-64 f 102 187 138 1-64 g 128 213 164 YEI 1-80 d a 80 255 215 185 180 140 120 10.9 10.5 1-80 e 100 205 140 1-80 f 128 233 168 1-80 g 160 265 200 a Laminations in accordance with the ratios prescribed inTableX of B

8、S6554-1:1984.10 blankBS6600-1:1987 BSI 01-2000 Publications referred to BS 415, Specification for safety requirements for mains-operated electronic and related apparatus for household and similar general use. BS 2045, Preferred numbers. BS 4500, ISO limits and fits. BS 4500-1, General, tolerances an

9、d deviations. BS 6554, Laminations for transformers and inductors for use in telecommunication and electronic equipment. BS 6554-1, Specification for dimensions, mechanical characteristics and electrical testing. IEC 852-1, Outline dimensions of transformers and inductors for use in telecommunicatio

10、n and electronic equipment Part 1: Transformers and inductors usingYEI-1 laminations 1) . 1) Referred to in the foreword only.BS 6600-1: 1987 BSI 389 Chiswick High Road London W4 4AL BSIBritishStandardsInstitution BSI is the independent national body responsible for preparing BritishStandards. It pr

11、esents the UK view on standards in Europe and at the international level. It is incorporated by Royal Charter. Revisions BritishStandards are updated by amendment or revision. Users of BritishStandards should make sure that they possess the latest amendments or editions. It is the constant aim of BS

12、I to improve the quality of our products and services. We would be grateful if anyone finding an inaccuracy or ambiguity while using this BritishStandard would inform the Secretary of the technical committee responsible, the identity of which can be found on the inside front cover. Tel:02089969000.

13、Fax:02089967400. BSI offers members an individual updating service called PLUS which ensures that subscribers automatically receive the latest editions of standards. Buying standards Orders for all BSI, international and foreign standards publications should be addressed to Customer Services. Tel:02

14、089969001. Fax:02089967001. In response to orders for international standards, it is BSI policy to supply the BSI implementation of those that have been published as BritishStandards, unless otherwise requested. Information on standards BSI provides a wide range of information on national, European

15、and international standards through its Library and its Technical Help to Exporters Service. Various BSI electronic information services are also available which give details on all its products and services. Contact the Information Centre. Tel:02089967111. Fax:02089967048. Subscribing members of BS

16、I are kept up to date with standards developments and receive substantial discounts on the purchase price of standards. For details of these and other benefits contact Membership Administration. Tel:02089967002. Fax:02089967001. Copyright Copyright subsists in all BSI publications. BSI also holds th

17、e copyright, in the UK, of the publications of the international standardization bodies. Except as permitted under the Copyright, Designs and Patents Act 1988 no extract may be reproduced, stored in a retrieval system or transmitted in any form or by any means electronic, photocopying, recording or

18、otherwise without prior written permission from BSI. This does not preclude the free use, in the course of implementing the standard, of necessary details such as symbols, and size, type or grade designations. If these details are to be used for any other purpose than implementation then the prior written permission of BSI must be obtained. If permission is granted, the terms may include royalty payments or a licensing agreement. Details and advice can be obtained from the Copyright Manager. Tel:02089967070.