BS 6262-3-2005 Glazing for buildings - Code of practice for fire security and wind loading《建筑物门窗玻璃 防火、安全性和风力载荷的实施规范》.pdf

《BS 6262-3-2005 Glazing for buildings - Code of practice for fire security and wind loading《建筑物门窗玻璃 防火、安全性和风力载荷的实施规范》.pdf》由会员分享，可在线阅读，更多相关《BS 6262-3-2005 Glazing for buildings - Code of practice for fire security and wind loading《建筑物门窗玻璃 防火、安全性和风力载荷的实施规范》.pdf（40页珍藏版）》请在麦多课文档分享上搜索。

1、 g49g50g3g38g50g51g60g44g49g42g3g58g44g55g43g50g56g55g3g37g54g44g3g51g40g53g48g44g54g54g44g50g49g3g40g59g38g40g51g55g3g36g54g3g51g40g53g48g44g55g55g40g39g3g37g60g3g38g50g51g60g53g44g42g43g55g3g47g36g58ICS 81.040.20Glazing for buildings Part 3: Code of practice for fire, security and wind loadingBRIT

2、ISH STANDARDBS 6262-3:2005BS 6262-3:2005This British Standard was published under the authority of the Standards Policy and Strategy Committee on 18 October 2005 BSI 18 October 2005First published as BS 973, 1941Second edition 1945Third edition, as CP 152, January 1960Fourth edition, August 1966 Fif

3、th edition, July 1972Sixth editiion, as BS 6262, June 1982Seventh edition, as BS 6262-3, October 2005The following BSI references relate to the work on this British Standard:Committee reference B/520/4ISBN 0 580 46773 2British Woodworking FederationConsumer Policy Committee of BSICouncil for Alumini

4、um in BuildingFlat Glass Manufacturers AssociationGlass and Glazing FederationNottingham UniversityOffice of the Deputy Prime Minister Building DivisionOffice of the Deputy Prime Minister represented by the BRE RICS Building Control ForumCo-opted membersAmendments issued since publicationAmd. No. Da

5、te CommentsCommittees responsible for this British StandardThe preparation of this British Standard was entrusted by Technical Committee B/520, Glass and glazing in building, to Subcommittee B/520/4, Properties and glazing methods, upon which the following bodies were represented:British Adhesives a

6、nd Sealants AssociationBritish Plastics FederaationBS 6262-3:2005 BSI 18 October 2005ContentsPageCommittees responsible Inside front coverForeword ii1Scope 12 Normative references 13 Terms and definitions 24Fire 55 Security 96 Wind loading 11Annex A (normative) Derivation of the design wind pressure

7、 in Table 7 32Annex B (informative) Examples of calculations of thickness required 33Bibliography 34Figure 1 Definition of size 4Figure 2 Basic wind speed map 13Figure 3 Topographic zones 14Figure 4 Float glass wind load resistance 16Figure 5 Toughened glass wind load resistance 17Figure 6 Laminated

8、 glass wind load resistance 18Figure 7 Patterned glass and wired glass wind load resistance 19Figure 8 Float glass insulating units wind load resistance 20Figure 9 Toughened glass insulating units wind load resistance 21Figure 10 Various insulating units wind load resistance 22Figure 11 Various insu

9、lating units wind load resistance 23Figure 12 Wind loading graph for plastics glazing sheet materials, 15 mm edge cover, aspect ratio 1.0 to 1.5 26Figure 13 Wind loading graph for plastics glazing sheet materials, 15 mm edge cover, aspect ratio greater than 1.5 up to and including 2.5 27Figure 14 Wi

10、nd loading graph for plastics glazing sheet materials, 15 mm edge cover, aspect ratio greater than 2.5 up to and including 3.5 28Figure 15 Wind loading graph for plastics glazing sheet materials, 5 mm edge cover, aspect ratio 1.0 to 1.5 29Figure 16 Wind loading graph for plastics glazing sheet mater

11、ials, 5 mm edge cover, aspect ratio greater than 1.5 up to and including 2.5 30Figure 17 Wind loading graph for plastics glazing sheet materials, 5 mm edge cover, aspect ratio greater than 2.5 up to and including 3.5 31Table 1 British and European Standards 5Table 2 Fire properties of glass (excludi

12、ng fire resistance) 7Table 3 Fire properties of integrity only glass when tested in accordance with BS 476-22:1987 and glazed in suitably designed systems 8Table 4 Fire properties of insulated glass when tested in accordance with BS 476-22:1987 and glazed in suitably designed systems 8Table 5 Fire p

13、roperties of plastics glazing sheet materials 9Table 6 Site terrain categories 11Table 7 Design wind loading at sea level 12Table 8 Topographical factor 14Table 9 Shape factors 15Table A.1 Building factors 32iBS 6262-3:2005iisupersedes BS 6262:1982, which will be withdrawn upon publication of all se

14、ven parts of the newly revised and restructured BS 6262.BS 6262:1982 is being revised and also restructured to simplify its use and will be published in seven parts: Part 1: General methodology for the selection of glazing; Part 2: Code of practice for heat, light and sound; Part 3: Code of practice

15、 for fire, security and wind loading; Part 4: Code of practice for safety related to human impact; Part 5: Code of practice for frame design considerations; Part 6: Code of practice for special applications; Part 7: Code of practice for provision of information.Requirements for standards of workmans

16、hip for glazing have been published separately as BS 8000-7 and, therefore, this subject is not dealt with in this standard.Since the correct selection of materials to be used in glazing for buildings depends on many factors, the recommendations in this part of the standard should be used in conjunc

17、tion with those in the other parts.As a code of practice, this British Standard takes the form of guidance and recommendations. It should not be quoted as if it were a specification and particular care should be taken to ensure that claims of compliance are not misleading.This publication does not p

18、urport to include all the necessary provisions of a contract. Users are responsible for its correct application.Compliance with a British Standard does not of itself confer immunity from legal obligations.In particular, attention is drawn to the following statutory regulations.The Building Regulatio

19、ns 2000 1.The Building Regulations (Northern Ireland) 2.The Building Standards (Scotland) Regulations 2004 3.Summary of pagesThis document comprises a front cover, an inside front cover, pages i and ii, pages 1 to 35 and a back cover.The BSI copyright notice displayed in this document indicates when

20、 the document was last issued.ForewordThis part of BS 6262 has been prepared by Subcommittee B/520/4. It partially BSI 18 October 2005BS 6262-3:20051 ScopeThis part of BS 6262 gives information and recommendations for vertical glazing in the external walls and interiors of buildings, with respect to

21、 fire safety, security and wind loading.These recommendations apply only when the glass is installed in a glazing system specifically designed for the purpose.These recommendations do not apply to:a) patent glazing (see BS 5516-1);b) glass in non-vertical applications (see BS 5516-2)c) glazing for c

22、ommercial greenhouses (see BS 5502-21);d) glazing for domestic greenhouses.Requirements for standards of workmanship for glazing have been published separately as BS 8000-7 and, therefore, this subject is not dealt with in this standard.2 Normative referencesThe following referenced documents are in

23、dispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.BS 476-4, Fire tests on building materials and structures Part 4: Non-combustibility test f

24、or materials.BS 476-6, Fire tests on building materials and structures Part 6: Method of test for fire propagation for products.BS 476-7, Fire tests on building materials and structures Part 7: Method of test to determine the classification of the surface spread of flame of products.BS 476-20, Fire

25、tests on building materials and structures Part 20: Method for determination of the fire resistance of elements of construction (general principles).BS 476-22, Fire tests on building materials and structures Part 22: Methods for determination of the fire resistance of non-loadbearing elements of con

26、struction.BS 5051-1, Bullet-resistant glazing Part 1: Specification for glazing for interior use.BS 5544, Specification for anti-bandit glazing (glazing resistant to manual attack).BS 5357, Code of practice for installation of security glazing.BS 6180, Barriers in and about buildings Code of practic

27、e.BS 6262-4, Glazing for buildings Part 4: Code of practice for safety related to human impact.BS 6399-2:1997, Loading for buildings Part 2: Code of practice for wind loads.BS EN 356, Glass in building Security glazing Testing and classification of resistance against manual attack.BS EN 1063, Glass

28、in building Security glazing Testing and classification of resistance against bullet attack.BS EN 1363, Fire resistance tests.BS EN 1364, Fire resistance tests for non-loadbearing elements.BS EN 1634, Fire resistance tests for door and shutter assemblies.BS EN 13123-1, Windows, doors and shutters Ex

29、plosion resistance Requirements and classification Part 1: Shock tube.BS EN 13123-2, Windows, doors and shutters Explosion resistance Requirements and classification BSI 18 October 20051Part 2: Range test.BS EN 13124-1, Windows, doors and shutters Explosion resistance Test method Part 1: Shock tube.

30、BS EN 13124-2, Windows, doors and shutters Explosion resistance Test method Part 2: Range test.BS 6262-3:2005BS EN 13501-1, Fire classification of construction products and building elements Part 1: Classification using test data from reaction to fire tests.BS EN 13501-2, Fire classification of cons

31、truction products and building elements Part 2: Classification using data from fire resistance tests, excluding ventilation services.BS EN 13541, Glass in building Security glazing Testing and classification of resistance against explosion pressure.BS EN 13823:2002, Reaction to fire tests for buildi

32、ng products Building products excluding floorings exposed to the thermal attack by a single burning item.BS EN ISO 1182:2002, Reaction to fire tests for building products Non-combustibility test.BS EN ISO 1716:2002, Reaction to fire tests for building products Determination of the heat of combustion

33、.BS EN ISO 9239-1:2002, Reaction to fire tests Horizontal surface spread of flame on floor-covering systems Part 1: Determination of the burning behaviour using a radiant heat source.BS EN ISO 11925-2:2002, Reaction to fire tests Ignitability of building products subjected to direct impingement of f

34、lame Part 2: Single-flame source test.3 Terms and definitionsFor the purposes of this British Standard, the following terms and definitions apply.3.1 aspect ratioratio of the longer side of a pane to its shorter side3.2 glazing, nounglass or plastics glazing sheet material, for installation into a b

35、uilding3.3 glazing, verbaction of installing glass, or plastics glazing sheet material, into a building3.4 insulating glass unitan assembly consisting of at least two panes of glass, separated by one or more spaces, hermetically sealed along the periphery, mechanically stable and durable BS EN 1279-

36、1:2004, definition 3.1NOTE The individual panes may be of different sizes and/or thicknesses.3.5 insulating glassfire resistant glass that can resist the passage of flames, smoke and heat through the glass for a period of time (normally 30 min or longer), when tested in accordance with an appropriat

37、e fire resistance test method, without the unexposed surface temperature exceeding a specified limitNOTE 1 Appropriate fire resistance test methods are BS 476-22, BS EN 1363, BS EN 1364, BS EN 1634.NOTE 2 See also 3.6.3.6 integrity only glassfire resistant glass that can resist the passage of flames

38、 and smoke through the glass for a period of time (normally 30 min or longer), when tested in accordance with an appropriate fire resistance testNOTE 1 Appropriate fire resistance test methods are BS 476-22, BS EN 1363, BS EN 1364, BS EN 1634.2 BSI 18 October 2005NOTE 2 See also 3.5.BS 6262-3:20053.

39、7 panesingle piece of glass or plastics glazing sheet material, in a finished size ready for glazing3.8 plastics glazing sheet materialplastics material in the form of a single sheet, or a combination of sheets laminated together, or an extruded multi-wall sheet3.9 pane sizedimensions of a pane NOTE

40、 See Figure 1.3.10 sight sizedimensions of the opening which, when glazed with a transparent or translucent material, admits lightNOTE See Figure 1.3.11 tight sizedimensions of the rebated openingNOTE 1 This is also know as the rebated size.NOTE 2 See Figure 1.3.12 edge coverdistance between the edg

41、e of the glass and the sight lineNOTE See Figure 1.3.13 nominal dimensionsdesign size excluding tolerances3.14 vertical glazingglazing which is vertical, or within 15 of vertical BSI 18 October 20053BS 6262-3:2005Key1 Tight size 3 Sight size 5 Edge cover2 Pane size 4 Bead 6 Frame12345612 34564 BSI 1

42、8 October 2005Figure 1 Definition of sizeBS 6262-3:20054 Fire4.1 Regulations and test standardsStructural fire precautions might need to consider the performance of glass and plastics glazing sheet materials. These precautions are controlled for new building work by building regulations and bylaws a

43、nd by other fire safety legislation for occupied premises.For new buildings, control is exercised separately in England (excluding Inner London) and Wales, Inner London, Scotland and Northern Ireland. The extent of control depends on the type of glass or plastics glazing sheet material and the metho

44、d of specification, the particular location and the applicable regulations (see BS 6262-1:2005, Annex A) 1, 2, 3.In determining the appropriate fire properties of glazing the tests given in Table 1 apply. Both European Standards and British Standards are accepted, but these should not be mixed and m

45、atched.NOTE Building regulations generally only apply to the provision of reasonable standards of health and safety for people in buildings. Requirements other than regulatory ones (e.g. property protection) might need to be taken into account.Generally, regulations are written in terms of performan

46、ce under the standard fire tests but BS 5588 and other codes of practice dealing with means of escape in case of fire make specific mention in connection with the use of glass when fire resistance is required.Table 1 British and European StandardsBritish Standards European StandardsReaction to fireB

47、S 476-4:1970. This test determines whether building materials are non-combustible within the meaning of the definition. Determination of combustibility is made by reference to the duration of any flaming or the increase in the temperature of the sample or furnace above a defined limit.BS 476-6:1989.

48、 The tests provide a means of comparing the contribution of building materials to the growth of a fire by measuring the rate of heat evolution. The performance is expressed as a numerical index from 0 to 100 or more, low values indicating a low rate of heat release.BS 476-7:1987. The tests are used

49、to determine the tendency of materials to support the spread of flames across their surfaces and specifies a method of classification. The performances are expressed as four classes, class 1 representing the best performance.NOTE For Class 0, Tp(a) and Tp(b) see the appropriate building regulations 1, 2, 3.According to European Commission Decision 96/603/EC (consolidated 2003/424/EC)