BS 6203-2003 Guide to fire characteristics and fire performance of expanded polystyrene materials (EPS and XPS) used in building applications《建筑设施用膨胀聚苯乙烯(EPS)材料的燃烧特性和着火性能指南》.pdf

《BS 6203-2003 Guide to fire characteristics and fire performance of expanded polystyrene materials (EPS and XPS) used in building applications《建筑设施用膨胀聚苯乙烯(EPS)材料的燃烧特性和着火性能指南》.pdf》由会员分享，可在线阅读，更多相关《BS 6203-2003 Guide to fire characteristics and fire performance of expanded polystyrene materials (EPS and XPS) used in building applications《建筑设施用膨胀聚苯乙烯(EPS)材料的燃烧特性和着火性能指南》.pdf（48页珍藏版）》请在麦多课文档分享上搜索。

1、BRITISH STANDARD BS 6203:2003 Guide to fire characteristics and fire performance of expanded polystyrene materials (EPS and XPS) used in building applications ICS 13.220.50 BS 6203:2003 This British Standard was published under the authority of the Standards Policy and Strategy Committee and comes i

2、nto effect on 23 April 2003 BSI 23 April 2003 First published February 1991 The following BSI references relate to the work on this British Standard: Committee reference PRI/26 Draft for comment 00/124251 DC ISBN 0 580 41516 3 Committees responsible for this British Standard The preparation of this

3、British Standard was entrusted to PRI/26, Burning behaviour of plastics and rubbers, upon which the following bodies were represented: Association of Building Component Manufacturers British Cables Association British Electrical Systems Association British Plastics Federation British Railways Board

4、Building Research Establishment Electrical 22; Rules for Automatic Sprinkler Installations 23. 4.5 Euroclassification of reaction-to-fire performance of building products 4.5.1 The future objectives for establishing a single European Market for Construction Products and the requirements regarded as

5、essential in relation to the fire of safety of construction products are defined in the EC Construction Products Directive 24 and in the Interpretative Document No. 2, Safety in Case of Fire 25. Subsequent to the publication of these documents and after receiving proposals from a representative comm

6、ittee of National Regulators, the Commission of the European Communities published a Commission Decision 26, which detailed how a harmonized solution to reaction-to-fire performance would be developed based on a system of Euroclasses. This approach was designed to enable national regulations to rela

7、te their own required fire safety performance to harmonized European Standards and Euroclasses; it is not intended to herald new European Regulations for Fire Safety since each country will want to retain their independent policy towards national fire regulations. 4.5.2 The EC Decision implementing

8、Article 20 of the Construction Products Directive concerning establishment of Euroclasses 26 includes two classification systems for reaction-to-fire performance, one for floor-coverings and the other for building products excluding floorings. The EC Decision clearly states that products should be c

9、onsidered for evaluation of reaction-to-fire performance in their end-use conditions. This reference document also defines the fields of application for Euroclassification; the product areas detailed are as follows: a) products for walls and ceilings including their surface coverings; b) building el

10、ements; c) products incorporated within building elements; d) pipes and duct components (including externally applied insulation); e) products for faades/external walls (including insulation layers, etc.); f) floorings (including surface coverings). NOTE 1 Roof-coverings are excluded from the reference document.