BS 6083-5-1984 Hearing aids - Specification for dimensions of the nipple and sealing device for insert earphones《助听器 第5部分 内插式耳机短接管接头和封闭装置尺寸规范》.pdf

《BS 6083-5-1984 Hearing aids - Specification for dimensions of the nipple and sealing device for insert earphones《助听器 第5部分 内插式耳机短接管接头和封闭装置尺寸规范》.pdf》由会员分享，可在线阅读，更多相关《BS 6083-5-1984 Hearing aids - Specification for dimensions of the nipple and sealing device for insert earphones《助听器 第5部分 内插式耳机短接管接头和封闭装置尺寸规范》.pdf（8页珍藏版）》请在麦多课文档分享上搜索。

1、BRITISH STANDARD BS 6083-5: 1984 IEC 118-5: 1983 Incorporating Amendment No. 1 Hearing aids Part 5: Specification for dimensions of the nipple and sealing device for insert earphones (Implementation of CENELEC HD 450.5 S1) UDC 616.28-76:621.395.623.6BS6083-5:1984 This British Standard, having been p

2、repared under the directionof the Electronic Equipment Standards Committee,was published underthe authority of the BoardofBSI and comes into effect on 30 March 1984 BSI 10-1999 The following BSI references relate to the work on this standard: Committee reference EEL/24 Draft for comment 81/24540 DC

3、ISBN 0 580 13794 5 Committees responsible for this British Standard The preparation of this British Standard was entrusted by the Electronic Equipment Standards Committee (EEL/-) to Technical Committee EEL/24 upon which the following bodies were represented: British Radio and Electronic Equipment Ma

4、nufacturers Association British Telecommunications Department of Health and Social Security Department of Trade and Industry (National Physical Laboratory) Institution of Electronic and Radio Engineers Royal National Institute for the Deaf Society of Hearing Aid Audiologists Limited The following bo

5、dies were also represented in the drafting of the standard, through subcommittees and panels: British Medical Association British Society of Audiology Health and Safety Executive Hearing Aid Industry Association Institute of Actuaries Institute of Sound and Vibration Research Manchester Area Health

6、Authority Medical Research Council Ministry of Defence National Coal Board Royal Aeronautical Society Amendments issued since publication Amd. No. Date of issue Comments 6182 October 1990 Indicated by a sideline in the marginBS6083-5:1984 BSI 10-1999 i Contents Page Committees responsible Inside fro

7、nt cover National foreword ii 1 Scope 1 2 Object 1 3 Dimensions 1 Figure 1 Nipple and sealing device 1 Table I Dimension of nipple and sealing device 2BS6083-5:1984 ii BSI 10-1999 National foreword This Part of this British Standard has been prepared under the direction of the Electronic Equipment S

8、tandards Committee and is identical with IECPublication 118-5:1983 “Nipples for insert earphones”, published by the International Electrotechnical Commission (IEC). This standard is also in agreement with Harmonization Document HD450.5 S1 published by the European Committee for Electrotechnical Stan

9、dardization (CENELEC). BS 6083 consists of the following Parts: Part 0:1984: Methods for measurement of electroacoustical characteristics; Part 1:1981: Method of measurement of characteristics of hearing aids with induction pick-up coil input; Part 2:1981: Methods of measurement of electro-acoustica

10、l characteristics of hearing aids with automatic gain control circuits; Part 3:1981:Methods of measurement of electro-acoustical characteristics of hearing aid equipment not entirely worn on the listener; Part 4:1981: Specification for magnetic field strength in audio-frequency induction loops for h

11、earing aid purposes; Part 5:1984:Specification for dimensions of the nipple and sealing device for insert earphones; Part 6:External electrical inputs to personal hearing aids; Part 7:Methods for measurement of performance characteristics of hearing aids for quality inspection for delivery purposes;

12、 Part 8:Methods for measurement of performance characteristics of hearing aids under simulated in situ working conditions; Part 9:Method for measurement of characteristics of hearing aids with bone vibrator outputs; Part 10:Standard practices for hearing aid specification; Part 11:1984: Specificatio

13、n for symbols and other markings on hearing aids and related equipment. Terminology and conventions. The text of the International Standard has been approved as suitable for publication as a British Standard without deviation. Some terminology and certain conventions are not identical with those use

14、d in British Standards; attention is drawn especially to the following. The comma has been used in Table I as the decimal marker. In British Standards it is current practice to use a full point on the baseline as the decimal marker. A British Standard does not purport to include all the necessary pr

15、ovisions of a contract. Users of British Standards are responsible for their correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. Summary of pages This document comprises a front cover, an inside front cover, pages i and ii, pages1 and 2

16、and a back cover. This standard has been updated (see copyright date) and may have had amendments incorporated. This will be indicated in the amendment table on the inside front cover.BS6083-5:1984 BSI 10-1999 1 1 Scope This standard is applicable to insert earphones which can be fitted to an earmou

17、ld inserted into the ear canal. 2 Object The object of this standard is to define those dimensions which are essential in order to ensure interchangeability of insert earphones as used with earmoulds or other attachments to the ear. 3 Dimensions 3.1 The dimensions given in this standard apply to the

18、 nipple and the sealing device separately. 3.2 The nipple and the sealing device are shown schematically in Figure 1, page1. The various dimensions designated by letters are given in Table I, page2, together with their tolerances. Figure 1 Nipple and sealing deviceBS6083-5:1984 2 BSI 10-1999 Table I

19、 Dimension of nipple and sealingdevice Ref. Millimetres Min. Nom. Max. A 6,27 6,30 6,35 (B) a (1,50) (1,60) (1,65) C 0,80 0,85 0,90 B + C 2,30 2,45 2,55 D 0,4 E 10,0 F 5,7 5,8 5,9 G 0,18 0,20 0,22 Ref. Degrees Min. Nom. Max. 10,5 11,0 12,0 a Dimension (B) is given for manufacturing purposes only.bla

20、nkBS 6083-5: 1984 IEC 118-5: 1983 BSI 389 Chiswick High Road London W4 4AL BSIBritishStandardsInstitution BSI is the independent national body responsible for preparing BritishStandards. It presents the UK view on standards in Europe and at the international level. It is incorporated by Royal Charte

21、r. Revisions BritishStandards are updated by amendment or revision. Users of BritishStandards should make sure that they possess the latest amendments or editions. It is the constant aim of BSI to improve the quality of our products and services. We would be grateful if anyone finding an inaccuracy

22、or ambiguity while using this BritishStandard would inform the Secretary of the technical committee responsible, the identity of which can be found on the inside front cover. Tel:02089969000. Fax:02089967400. BSI offers members an individual updating service called PLUS which ensures that subscriber

23、s automatically receive the latest editions of standards. Buying standards Orders for all BSI, international and foreign standards publications should be addressed to Customer Services. Tel:02089969001. Fax:02089967001. In response to orders for international standards, it is BSI policy to supply th

24、e BSI implementation of those that have been published as BritishStandards, unless otherwise requested. Information on standards BSI provides a wide range of information on national, European and international standards through its Library and its Technical Help to Exporters Service. Various BSI ele

25、ctronic information services are also available which give details on all its products and services. Contact the Information Centre. Tel:02089967111. Fax:02089967048. Subscribing members of BSI are kept up to date with standards developments and receive substantial discounts on the purchase price of

26、 standards. For details of these and other benefits contact Membership Administration. Tel:02089967002. Fax:02089967001. Copyright Copyright subsists in all BSI publications. BSI also holds the copyright, in the UK, of the publications of the international standardization bodies. Except as permitted

27、 under the Copyright, Designs and Patents Act 1988 no extract may be reproduced, stored in a retrieval system or transmitted in any form or by any means electronic, photocopying, recording or otherwise without prior written permission from BSI. This does not preclude the free use, in the course of i

28、mplementing the standard, of necessary details such as symbols, and size, type or grade designations. If these details are to be used for any other purpose than implementation then the prior written permission of BSI must be obtained. If permission is granted, the terms may include royalty payments or a licensing agreement. Details and advice can be obtained from the Copyright Manager. Tel:02089967070.