BS 3558-1-1997 Glossary of rubber terms - International terms《橡胶术语 第1部分 国际术语》.pdf

《BS 3558-1-1997 Glossary of rubber terms - International terms《橡胶术语 第1部分 国际术语》.pdf》由会员分享，可在线阅读，更多相关《BS 3558-1-1997 Glossary of rubber terms - International terms《橡胶术语 第1部分 国际术语》.pdf（86页珍藏版）》请在麦多课文档分享上搜索。

1、BRITISH STANDARD BS 3558-1: 1997 ISO 1382:1996 Glossary of rubber terms Part 1: International terms ICS 01.040.83; 83.060BS3558-1:1997 This British Standard, having been prepared under the directionof the Sector Board forMaterials and Chemicals, waspublished under the authorityof the Standards Board

2、and comes into effect on 15 October 1997 BSI 03-2000 ISBN 0 580 28463 8 National foreword This British Standard reproduces verbatim ISO 1382:1996 and implements it as the UK national standard. The UK participation in its preparation was entrusted to Technical Committee PRI/10, Terminology for rubber

3、 and plastics, which has the responsibility to: aid enquirers to understand the text; present to the responsible international/European committee any enquiries on the interpretation, or proposals for change, and keep the UK interests informed; monitor related international and European developments

4、and promulgate them in the UK. Part 2 of this glossary will contain a revision of the terms and definitions in BS3558:1980 not included in this Part. A list of organizations represented on this committee can be obtained on request to its secretary. Cross-references The British Standards which implem

5、ent international or European publications referred to in this document may be found in the BSI Standards Catalogue under the section entitled “International Standards Correspondence Index”, or by using the “Find” facility of the BSI Standards Electronic Catalogue. A British Standard does not purpor

6、t to include all the necessary provisions of a contract. Users of British Standards are responsible for their correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. Summary of pages This document comprises a front cover, an inside front cov

7、er, pages i and ii, theISO title page, pages ii to viii, pages 1 to 73 and a back cover. This standard has been updated (see copyright date) and may have had amendments incorporated. This will be indicated in the amendment table on the inside front cover. Amendments issued since publication Amd. No.

8、 Date CommentsBS3558-1:1997 BSI 03-2000 i Contents Page National foreword Inside front cover Foreword ii Text of ISO 1382 1ii blankBS3558-1:1997 ii BSI 03-2000BS3558-1:1997 BSI 03-2000 iiiBS3558-1:1997 iv BSI 03-2000BS3558-1:1997 BSI 03-2000 vBS3558-1:1997 vi BSI 03-2000BS3558-1:1997 BSI 03-2000 vii

9、viii blankBS3558-1:1997 BSI 03-2000 1BS3558-1:1997 2 BSI 03-2000BS3558-1:1997 BSI 03-2000 3BS3558-1:1997 4 BSI 03-2000BS3558-1:1997 BSI 03-2000 5BS3558-1:1997 6 BSI 03-2000BS3558-1:1997 BSI 03-2000 7BS3558-1:1997 8 BSI 03-2000BS3558-1:1997 BSI 03-2000 9BS3558-1:1997 10 BSI 03-2000BS3558-1:1997 BSI 0

10、3-2000 11BS3558-1:1997 12 BSI 03-2000BS3558-1:1997 BSI 03-2000 13BS3558-1:1997 14 BSI 03-2000BS3558-1:1997 BSI 03-2000 15BS3558-1:1997 16 BSI 03-2000BS3558-1:1997 BSI 03-2000 17BS3558-1:1997 18 BSI 03-2000BS3558-1:1997 BSI 03-2000 19BS3558-1:1997 20 BSI 03-2000BS3558-1:1997 BSI 03-2000 21BS3558-1:19

11、97 22 BSI 03-2000BS3558-1:1997 BSI 03-2000 23BS3558-1:1997 24 BSI 03-2000BS3558-1:1997 BSI 03-2000 25BS3558-1:1997 26 BSI 03-2000BS3558-1:1997 BSI 03-2000 27BS3558-1:1997 28 BSI 03-2000BS3558-1:1997 BSI 03-2000 29BS3558-1:1997 30 BSI 03-2000BS3558-1:1997 BSI 03-2000 31BS3558-1:1997 32 BSI 03-2000BS3

12、558-1:1997 BSI 03-2000 33BS3558-1:1997 34 BSI 03-2000BS3558-1:1997 BSI 03-2000 35BS3558-1:1997 36 BSI 03-2000BS3558-1:1997 BSI 03-2000 37BS3558-1:1997 38 BSI 03-2000BS3558-1:1997 BSI 03-2000 39BS3558-1:1997 40 BSI 03-2000BS3558-1:1997 BSI 03-2000 41BS3558-1:1997 42 BSI 03-2000BS3558-1:1997 BSI 03-20

13、00 43BS3558-1:1997 44 BSI 03-2000BS3558-1:1997 BSI 03-2000 45BS3558-1:1997 46 BSI 03-2000BS3558-1:1997 BSI 03-2000 47BS3558-1:1997 48 BSI 03-2000BS3558-1:1997 BSI 03-2000 49BS3558-1:1997 50 BSI 03-2000BS3558-1:1997 BSI 03-2000 51BS3558-1:1997 52 BSI 03-2000BS3558-1:1997 BSI 03-2000 53BS3558-1:1997 5

14、4 BSI 03-2000BS3558-1:1997 BSI 03-2000 55BS3558-1:1997 56 BSI 03-2000BS3558-1:1997 BSI 03-2000 57BS3558-1:1997 58 BSI 03-2000BS3558-1:1997 BSI 03-2000 59BS3558-1:1997 60 BSI 03-2000BS3558-1:1997 BSI 03-2000 61BS3558-1:1997 62 BSI 03-2000BS3558-1:1997 BSI 03-2000 63BS3558-1:1997 64 BSI 03-2000BS3558-

15、1:1997 BSI 03-2000 65BS3558-1:1997 66 BSI 03-2000BS3558-1:1997 BSI 03-2000 67BS3558-1:1997 68 BSI 03-2000BS3558-1:1997 BSI 03-2000 69BS3558-1:1997 70 BSI 03-2000BS3558-1:1997 BSI 03-2000 71BS3558-1:1997 72 BSI 03-2000BS3558-1:1997 BSI 03-2000 73BS 3558-1: 1997 ISO 1382:1996 BSI 389 Chiswick High Roa

16、d London W4 4AL BSIBritishStandardsInstitution BSI is the independent national body responsible for preparing BritishStandards. It presents the UK view on standards in Europe and at the international level. It is incorporated by Royal Charter. Revisions BritishStandards are updated by amendment or r

17、evision. Users of BritishStandards should make sure that they possess the latest amendments or editions. It is the constant aim of BSI to improve the quality of our products and services. We would be grateful if anyone finding an inaccuracy or ambiguity while using this BritishStandard would inform

18、the Secretary of the technical committee responsible, the identity of which can be found on the inside front cover. Tel:02089969000. Fax:02089967400. BSI offers members an individual updating service called PLUS which ensures that subscribers automatically receive the latest editions of standards. B

19、uying standards Orders for all BSI, international and foreign standards publications should be addressed to Customer Services. Tel:02089969001. Fax:02089967001. In response to orders for international standards, it is BSI policy to supply the BSI implementation of those that have been published as B

20、ritishStandards, unless otherwise requested. Information on standards BSI provides a wide range of information on national, European and international standards through its Library and its Technical Help to Exporters Service. Various BSI electronic information services are also available which give

21、details on all its products and services. Contact the Information Centre. Tel:02089967111. Fax:02089967048. Subscribing members of BSI are kept up to date with standards developments and receive substantial discounts on the purchase price of standards. For details of these and other benefits contact

22、 Membership Administration. Tel:02089967002. Fax:02089967001. Copyright Copyright subsists in all BSI publications. BSI also holds the copyright, in the UK, of the publications of the international standardization bodies. Except as permitted under the Copyright, Designs and Patents Act 1988 no extra

23、ct may be reproduced, stored in a retrieval system or transmitted in any form or by any means electronic, photocopying, recording or otherwise without prior written permission from BSI. This does not preclude the free use, in the course of implementing the standard, of necessary details such as symb

24、ols, and size, type or grade designations. If these details are to be used for any other purpose than implementation then the prior written permission of BSI must be obtained. If permission is granted, the terms may include royalty payments or a licensing agreement. Details and advice can be obtained from the Copyright Manager. Tel:02089967070.