BS 2M 59-1993 Specification for interface of metric couplings 24 cone for aerospace fluid systems《航空航天流体系统用24圆锥形米制连接器接口规范》.pdf
《BS 2M 59-1993 Specification for interface of metric couplings 24 cone for aerospace fluid systems《航空航天流体系统用24圆锥形米制连接器接口规范》.pdf》由会员分享,可在线阅读,更多相关《BS 2M 59-1993 Specification for interface of metric couplings 24 cone for aerospace fluid systems《航空航天流体系统用24圆锥形米制连接器接口规范》.pdf(10页珍藏版)》请在麦多课文档分享上搜索。
1、BRITISH STANDARD AEROSPACE SERIES BS 2M 59:1993 ISO 7319:1992 Specification for Interface of metric couplings, 24 cone, for aerospace fluid systems UDC 621.643.414:629.7.064.2/.3BS 2M 59:1993 This British Standard, having been prepared under the directionof the Aerospace Standards Policy Committee,
2、waspublished under the authorityof the Standards Boardand comes into effect on 15August1993 BSI 12-1999 First published April 1986 Second edition August 1993 The following BSI references relate to the work on this standard: Committee reference ACE/- Draft for comment 91/77454 DC ISBN 0 580 22500 3 C
3、ommittees responsible for this British Standard The preparation of this British Standard was undertaken by the Aerospace Standards Policy Committee (ACE/-) upon which the following bodies were represented: British Airways Department of Trade and Industry (Air Division) Institution of Electrical Engi
4、neers Ministry of Defence Society of British Aerospace Companies Amendments issued since publication Amd. No. Date CommentsBS2M59:1993 BSI 12-1999 i Contents Page Committees responsible Inside front cover National foreword ii 1 Scope 1 2 Normative reference 1 3 Coupling assembly and sealing principl
5、e 1 4 Dimensions 1 Annex A (informative) Bibliography 4 Figure 1 Dimensions 2 Table 1 Dimensions 3 List of references Inside back coverBS 2M 59:1993 ii BSI 12-1999 National foreword This British Standard has been prepared under the direction of the Aerospace Standards Policy Committee. It is identic
6、al with ISO7319:1992 Aerospace Fluid systems Interface of 24 cone metric couplings, published by the International Organization for Standardization (ISO). This British Standard supersedes BSM59:1986 which is withdrawn. Cross-reference The Technical Committee has reviewed the provisions of ISO5855-3:
7、1988, to which normative reference is made in the text, and has decided that they are acceptable for use in conjunction with this standard. A British Standard does not purport to include all the necessary provisions of a contract. Users of British Standards are responsible for their correct applicat
8、ion. Compliance with a British Standard does not of itself confer immunity from legal obligations. Summary of pages This document comprises a front cover, an inside front cover, pagesi andii, pages1 to4, an inside back cover and a back cover. This standard has been updated (see copyright date) and m
9、ay have had amendments incorporated. This will be indicated in the amendment table on the inside front cover.BS2M59:1993 BSI 12-1999 1 1 Scope This International Standard defines the geometry of the interface of removable24 cone couplings for fluid systems in aircraft. The connection with the pipe o
10、f each one of the connecting elements may be of different design. This International Standard specifies the dimensions which allow the interchangeability of the male and female elements and of the nut used for the connection. The dimensions define the maximum volume of the male fitting. 2 Normative
11、reference The following standard contains provisions which, through reference in this text, constitute provisions of this International Standard. At the time of publication, the edition indicated was valid. All standards are subject to revision, and parties to agreements based on this International
12、Standard are encouraged to investigate the possibility of applying the most recent edition of the standard indicated below. Members of IEC and ISO maintain registers of currently valid International Standards. ISO 5855-3:1988, Aerospace MJ threads Part3: Limit dimensions for fittings for fluid syste
13、ms. 3 Coupling assembly and sealing principle The coupling comprises three elements as follows. a) A female element including a frustum with a cone angle equal to24 , with which the male element comes into contact to provide sealing. The contact line is a circle with a theoretical diameter, E. b) A
14、male element, included inside a shell composed of two frustums connected by a spherical section with which the female element comes into contact to provide sealing. The contact line is a circle with a theoretical diameter, E. c) A nut allowing assembly of the male and female elements of the coupling
15、. 4 Dimensions The dimensions shall be as shown inFigure 1 and given inTable 1.BS 2M 59:1993 2 BSI 12-1999 Key Point a: origin at E/2 from the XX axis Point b: point located at a distance R from point a, on the perpendicular to the line tilted 12 relative to XX and passing through point a Point c: l
16、ocated at B/2 from the XX axis and at a distance P from point a Line cd: tangent drawn from c to the arc of the circle with centre at b and radius R Line ef: tangent tilted 12 50 relative to the XX axis on the arc to the circle with centre at b and radius R. The point of tangency thus obtained is de
- 1.请仔细阅读文档,确保文档完整性,对于不预览、不比对内容而直接下载带来的问题本站不予受理。
- 2.下载的文档,不会出现我们的网址水印。
- 3、该文档所得收入(下载+内容+预览)归上传者、原创作者;如果您是本文档原作者,请点此认领!既往收益都归您。
下载文档到电脑,查找使用更方便
10000 积分 0人已下载
下载 | 加入VIP,交流精品资源 |
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- BS2M591993SPECIFICATIONFORINTERFACEOFMETRICCOUPLINGS24CONEFORAEROSPACEFLUIDSYSTEMS 航空航天 流体 系统 24 圆锥形
链接地址:http://www.mydoc123.com/p-543461.html