BS 1765-2-1976 Specification for hospital bedside lockers - General purpose lockers of wooden construction with facilities for hanging day clothes《医院床头柜规范 第2部分 可挂日常衣物的一般木制床头柜》.pdf

《BS 1765-2-1976 Specification for hospital bedside lockers - General purpose lockers of wooden construction with facilities for hanging day clothes《医院床头柜规范 第2部分 可挂日常衣物的一般木制床头柜》.pdf》由会员分享，可在线阅读，更多相关《BS 1765-2-1976 Specification for hospital bedside lockers - General purpose lockers of wooden construction with facilities for hanging day clothes《医院床头柜规范 第2部分 可挂日常衣物的一般木制床头柜》.pdf（10页珍藏版）》请在麦多课文档分享上搜索。

1、BRITISH STANDARD BS1765-2: 1976 Specification for Hospital bedside lockers Part2: General purpose lockers of wooden construction with facilities for hanging day clothes UDC 615.478:684.453.5BS1765-2:1976 This British Standard, having been prepared under the directionof the Committee forHospital Beds

2、ide Lockers,waspublished undertheauthority of theExecutive Board on 29October1976 BSI11-1999 The following BSI references relate to the work on this standard: Committee referenceSGS/32 Draft for comment74/62585DC and draft for approval75/61185 ISBN 0 580 09247 X Cooperating organizations The Committ

3、ee for Hospital Bedside Lockers, under whose supervision this British Standard was prepared, consists of representatives from the following Government departments and professionals scientific and industrial organizations: Association of Nurse Administrators British Furniture Manufacturers Federated

4、Associations British Plastics Federation British Surgical Trades Association (Inc.) Department of the Environment Department of Health and Social Security Design Council King Edwards Hospital Fund for London National Association of Hospital Supplies Officers Royal College of Nursing and National Cou

5、ncil of Nurses of the UK Individual experts. Amendments issued since publication Amd. No. Date of issue CommentsBS1765-2:1976 BSI 11-1999 i Contents Page Cooperating organizations Inside front cover Foreword ii 1 Scope 1 2 References 1 3 Basic user and design requirements 1 4 Dimensions and toleranc

6、es 1 5 Materials 2 6 Construction 2 7 Finish 3 8 Marking 3 Appendix A Information desirable with enquiry or order 4 Publications referred to Inside back coverBS1765-2:1976 ii BSI 11-1999 Foreword BS1765-1 was published in1972 giving the broad principles for use by manufacturers in the design of gene

7、ral purpose lockers. This Part2 of BS1765 covers lockers with facilities for hanging day clothes and has been prepared at the request of the Department of Health and Social Security. The broad principles that should be observed for this type of locker are given to assist in the selection of the most

8、 suitable designs. Appendix A lists information to be given by the purchaser in his enquiry or order. Certification. Attention is drawn to the certification facilities described on the inside back cover of this standard. A British Standard does not purport to include all the necessary provisions of

9、a contract. Users of British Standards are responsible for their correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. Summary of pages This document comprises a front cover, an inside front cover, pagesi andii, pages1 to4, an inside back

10、cover and a back cover. This standard has been updated (see copyright date) and may have had amendments incorporated. This will be indicated in the amendment table on the inside front cover.BS1765-2:1976 BSI 11-1999 1 1 Scope This Part of this British Standard specifies basic user and design require

11、ments, dimensions, materials and constructional requirements for general purpose hospital bedside lockers, made of wood, with facilities for hanging day clothes. 2 References The titles of the publications referred to in this standard are listed on the inside back cover. 3 Basic user and design requ

12、irements 3.1 The locker shall provide accommodation for most of the items detailed below. Those marked with an asterisk should be most readily accessible from the bed. a) Clothes. Day clothes, night clothes, underclothes, socks and bedsocks, handkerchiefs*, dressing gown, slippers, bed jacket or car

13、digan. b) Toilet articles*. Towels, soap, flannel, shaving gear or cosmetics, hair brush, comb, toothbrush, toothpaste, tooth mugs, denture bath, disposable sputum containers.* c) Food*. Fruit, soft drinks, sweets, biscuits. d) Other articles. Books, magazines, stationery, photographs, cigarettes, t

14、obacco, ashtray, toys and games, occupational therapy materials, waste container*, handbag or purse, wallet, watch, water jug and tumbler*, flower vase, spectacle case, hearing aid, paper tissues*, knitting bag. NOTENo one patient would need all these items. Some items therefore may be kept on the t

15、op of the locker, while others may be kept in or on fittings on the outside of the locker. 3.2 Although toilet articles are normally kept outside the locker and although it is recommended that items of food should be kept in a separate container, it is considered that there should be adequate ventil

16、ation provided as part of the design of the locker. 3.3 The compartment for the accommodation of dressing gown and spare night clothing shall be in the lower part of the locker. Hanging space for day clothing shall be provided. 3.4 Some degree of reversibility to enable a locker to be used with equa

17、l convenience at either side of the bed is desirable. 3.5 Although the value of a fillet on the top surface of the locker to assist in preventing objects from falling off the locker is appreciated, it is considered that this advantage is outweighed by the increased difficulty of cleaning and the inc

18、onvenience caused by fillets if the top of the locker is used for resting trays or writing notes. 3.6 Lockers shall in general be mounted upon castors, although there may be special cases when some other supports (e.g.skids) are necessary. If castors are fitted they shall be of not less than40mm nom

19、inal wheel diameter and shall comply with the requirements of BS2099-1. 3.7 The lockers shall be of plain design so that cleaning is simplified and dust traps are kept to a minimum. NOTE 1Hospital authorities are generally opposed to the keeping of bedpans, urine bottles, toilet rolls and bathing bl

20、ankets in bedside lockers on grounds of hygiene, and provision for these in the locker is strongly deprecated. NOTE 2The provision of a seat as an integral part of a locker is deprecated. 4 Dimensions and tolerances 4.1 The overall dimensions of the lockers shall be as specified by the purchaser wit

21、hin the following ranges. Height of carcase950mm to1050mm. Width of carcase460mm to600mm. Depth of carcase460mm to600mm. The inside dimensions of the clothes hanging compartment, which shall be the full internal height of the locker, shall be not less than500mm by125mm. The top shall not overhang th

22、e carcase by more than12mm all round. 4.2 Sizes specified by the purchaser in accordance with4.1 shall be subject to a tolerance of 3mm. 4.3 In order to allow freedom of design, with the exception of the clothes hanging compartment (see4.1), the disposition and dimensions of the compartments of the

23、locker providing for the accommodation of articles listed in3.1 are not given in this standard.BS1765-2:1976 2 BSI 11-1999 5 Materials 5.1 Timber 5.1.1 All solid timber members, i.e.the rails, lippings, and, at the manufacturers option, the drawer fronts, sides and back, shall be of prime quality ha

24、rdwood, free from sapwood, shakes, wormholes and other defects. Where applicable, solid timber shall comply with the requirements of BS1186-1. 5.1.2 All timber shall be conditioned to a moisture content of10% to12% at the time of assembly of parts. 5.1.3 Plywood shall be of a grade not lower than gr

25、ade3 MR of BS1455. 5.1.4 Blockboard shall comply with the requirements of BS3444, bonding type MR. 5.1.5 Wood chipboard shall comply with the requirements of BS2604 and have a minimum density of600kg/m 3 . 5.2 Decorative laminated plastics sheet. Laminated plastics sheet shall comply with the requir

26、ements of BS3794:1964 for class1 materials, except that sheet used on vertical surfaces may be of a minimum nominal thickness of0.75mm and that such sheet need not comply with the requirements of clauses8 and15 of that standard. 5.3 Adhesives 5.3.1 Adhesives used in the construction of the lockers s

27、hall comply with the requirements of BS1203 or BS1204. 5.3.2 The adhesive used for the bonding of plastics laminate to the substrate shall be one recommended by either the manufacturer of the plastics laminate or the adhesive manufacturer and shall be applied under pressure. Contact adhesives shall

28、not be used for laminates. 5.3.3 The adhesive used for bonding plastics extrusions shall be used and applied in accordance with the manufacturers instructions. 5.3.4 All adhesives shall be moisture resistant. 5.4 Fittings 5.4.1 Wood screws shall be steel improved head type to BS1210. Screws into chi

29、pboard shall be improved head type specially designed with twin threads. 5.4.2 Hinges shall be of robust construction and of a type to allow at least180 door opening, e.g.pianohinges. 5.4.3 Castors, when fitted, shall be as specified in3.6. 5.4.4 All fittings, including their fixing screws, nuts and

30、 bolts, shall be of adequate strength and corrosion resistant. 6 Construction 6.1 General 6.1.1 The carcase rails shall be dovetailed, mortised and tenoned or dowelled into the sides. Plywood, blockboard or wood chipboard backs shall be tongued or rebated into the sides. All joints shall be well glu

31、ed (in accordance with5.3) and cramped together, so that the shoulders meet accurately. 6.1.2 Outside verticals shall be radiused and all sharp edges removed. 6.1.3 All edges of carcase ends and doors, and all exposed edges of partitions and shelves, shall be hardwood lipped. The use of protective o

32、r decorative plastics sections does not preclude the requirements of lippings on wood chipboard, and the finishing of wood chipboard edges with plastics or wood veneer shall not be used. Lippings shall be at least6mm wide on face, and solid tongued or butt jointed if high-frequency gluing techniques

33、 are employed. If hinges are to be fixed, lippings shall be a minimum of15mm wide on face. 6.2 Partitions and shelves 6.2.1 Partitions and shelves shall be housed-in to a minimum of5mm and glued in accordance with5.3. 6.2.2 Shelves and short divisions shall be of12mm minimum thickness when in plywoo

34、d and15mm minimum thickness when in wood chipboard. 6.3 Locket tops 6.3.1 The top substrate material shall be covered with1.5mm thick plastics laminate sheet compensated on the underside with a balancing veneer having a smooth hygienic surface. 6.3.2 Edges shall be hardwood lipped all round as descr

35、ibed in6.1.3 or alternatively fitted with a continuous PVC extrusion10mm thick on show surfaces. The extrusion shall be of such section as to accept a tongue which is an integral part of the top and shall be applied with a suitable adhesive, shrunk on under pressure in accordance with the manufactur

36、ers instructions. 6.3.3 Edging, both wood and plastics, shall be sufficiently wide on face to allow for a minimum corner radius of10mm and lippings shall be applied as detailed in6.1.3. 6.3.4 Edgings, both wood and plastics, shall finish flush both sides and be rounded at the corners and neatly arri

37、ssed.BS1765-2:1976 BSI 11-1999 3 6.3.5 Substrate material for the carcase tops shall be of plywood, blockboard or wood chipboard of18mm minimum thickness before the plastics laminate veneers are applied. 6.4 Carcase bottoms. In order to provide secure fixings for castors or skids, the carcase bottom

38、 shall be18mm multiply hardwood, lipped on exposed edges and properly jointed to carcase ends. Alternatively a hardwood frame may be used with stiles and rails of sufficient area to ensure adequate screw fixing of castors or skids. Castor fixing into wood chipboard shall not be used. The panel filli

39、ng shall be flush fitting. 6.5 Carcase ends, doors and divisions. Substrate material for carcase ends, doors and full height divisions shall be of plywood, blockboard or wood chipboard,15mm minimum thickness before decorative surface veneers are applied. 6.6 Backs. Backs shall be of6mm thickness ply

40、wood or alternatively of9mm thickness wood chipboard. 6.7 Veneering 6.7.1 Wood and plastics laminate veneers shall be equally balanced on both surfaces and properly laid under pressure. 6.7.2 Wood veneers shall have a minimum thickness of0.6mm. Decorative paper veneers shall not be used. 6.7.3 If sh

41、ow-wood veneers are specified, the timber lippings and solid timber members shall be of the same species or a satisfactory matching equivalent. 6.8 Towel rail 6.8.1 A towel rail shall be fitted which is either chromium plated in accordance with service condition no.2 of BS1224, or of stainless steel

42、, or plastics coated to provide adequate corrosion resistance. 6.8.2 The towel rail shall be within the overall width of the locker and have an effective length which is as long as possible. 6.8.3 The centre of the towel rail shall be at least760mm above floor level and the clearance between the eff

43、ective length of the towel rail and any part of the locker shall be55mm minimum. It is recommended that the towel rail should be recessed into the rear of the locker so that it does not project beyond the rearmost face of the locker. 6.9 Hooks. Hooks when fitted shall be located on the back the lock

44、er. Hooks shall be chromium plated in accordance with service condition no.2 of BS1224, or of stainless steel, or plastics coated to provide adequate corrosion resistance. 6.10 Clothes hanging facilities. A rail or other suitable means to allow clothes to be hung centrally in the hanging compartment

45、 shall be provided. 7 Finish Exposed surfaces, both interior and exterior, shall either be finished with laminated plastics material or be of hardwood sections or veneers made smooth and finished with a not readily flammable material (e.g.polyurethane or acid catalyst lacquer) that is to an agreed s

46、tandard when tested for resistance to heat by the method specified in BS3962-3 and for resistance to acid, spirit, tea and coffee by the method specified in BS3962-4. If edges of locker tops and outside vertical corners are bound with shock absorbent plastics materials, it shall be durable and secur

47、ely fixed without crevices that may harbour dirt. 8 Marking Lockers complying with the requirements of this British Standard shall be clearly and indelibly marked with the following information. a) The number and Part of this British Standard, i.e.BS1765-2. b) The manufacturers name or other means o

48、f identification.BS1765-2:1976 4 BSI 11-1999 Appendix AInformation desirable with enquiry or order The purchaser should supply the following information with an enquiry or order. a) The overall height, width and depth of the locker required (see4.1). b) The type of internal and external finish requi

49、red (see clause7). c) Whether hooks for a flannel and sponge bag are required (see6.9).BS1765-2:1976 BSI 11-1999 Publications referred to BS1186, Quality of timber and workmanship in joinery. BS1186-1, Quality of timber. BS1203, Synthetic resin adhesives (phenolic and aminoplastic) for plywood. BS1204, Synthetic resin adhesives (phenolic and aminoplastic) for wood. BS1210, Wood screws. BS1224, Electroplated coatings of nickel and chromium. BS1455, Plywood manufactured from tropical hardwoods. BS1765, Hospital bedside lockers. BS1765-1, General purpose hospital bedside