ATIS J-STD-025-B-2006 Lawfully Authorized Electronic Surveillance.pdf

《ATIS J-STD-025-B-2006 Lawfully Authorized Electronic Surveillance.pdf》由会员分享，可在线阅读，更多相关《ATIS J-STD-025-B-2006 Lawfully Authorized Electronic Surveillance.pdf（268页珍藏版）》请在麦多课文档分享上搜索。

1、 J-STD-025-B July 2006 Lawfully Authorized Electronic Surveillance ANSI/J-STD-025-B-2006 APPROVED: JULY 17, 2006 REAFFIRMATION: FEBRUARY 9, 2012 JOINT STANDARDS Joint Standards and Publications are adopted in accordance with the American National Standards Institute (ANSI) patent policy. By such act

2、ion, the Telecommunications Industry Association or the Alliance for Telecommunications Industry Solutions does not assume any liability to any patent owner, nor does it assume any obligation whatever to parties adopting the Standard or Publication. This Standard does not purport to address all safe

3、ty problems associated with its use or all applicable regulatory requirements. It is the responsibility of the user of this Standard to establish appropriate safety and health practices and to determine the applicability of regulatory limitations before its use. This standard was developed under Pro

4、ject No. SP-3-4465-UGRV2-RF1, formulated under the cognizance of the TIA TR-45 Committee on Mobile Telephone (703)907-7700; Fax: (703)907-7727 or by email to receptiontiaonline.org. This document was coordinated between ATIS and TIA. A Word from TIA: TIA Engineering Standards and Publications are de

5、signed to serve the public interest through eliminating misunderstanding between manufacturers and purchasers, facilitating interchangeability and improvement of products, and assisting the purchaser in selecting and obtaining with minimum delay the proper product for his/her particular need. Existe

6、nce of such Standards and Publications shall not be in any respect preclude any member or nonmember of TIA from manufacturing or selling products not conforming to such Standards and Publications, nor shall the existence of such Standards and Publications preclude their voluntary use by those other

7、than TIA members, whether the standard is to be used either domestically or internationally. TIA Documents contain information deemed to be of technical value to the industry, and are published at the request of the originating Committee without necessarily following the rigorous public review and r

8、esolution of comments which is a procedural part of the development of a American National Standard (ANS). Further details of the development process are available in the TIA Engineering Manual, located at http:/www.tiaonline.org/standards/sfg/engineering_manual.cfm A Word from ATIS: ATIS is the lea

9、ding technical planning and standards development organization committed to the rapid development of global, market-driven standards for the information, entertainment and communications industry. More than 200 companies actively formulate standards in ATIS Forums, covering issues including: IPTV, C

10、loud Services, Energy Efficiency, IP-Based and Wireless Technologies, Quality of Service, Billing and Operational Support, Emergency Services, Architectural Platforms and Emerging Networks. In addition, numerous Incubators, Focus and Exploratory Groups address evolving industry priorities including

11、Smart Grid, Machine-to-Machine, Networked Car, IP Downloadable Security, Policy Management and Network Optimization. ATIS is the North American Organizational Partner for the 3rd Generation Partnership Project (3GPP), a member and major U.S. contributor to the International Telecommunication Union (

12、ITU) Radio and Telecommunications Sectors, and a member of the Inter-American Telecommunication Commission (CITEL). ATIS is accredited by the American National Standards Institute (ANSI). For more information, please visit www.atis.org. NOTICE FROM PATENT HOLDERS The users attention is called to the

13、 possibility that compliance with this standard may require use of an invention covered by patent rights. By publication of this standard, no position is taken with respect to the validity of this claim or of any patent rights in connection therewith. The patent holder has, however, filed a statemen

14、t of willingness to grant a license under these rights on reasonable and nondiscriminatory terms and conditions to applicants desiring to obtain a license. Details may be obtained from the Telecommunications Industry Association, Alliance for Telecommunications Industry Solutions or the American Nat

15、ional Standards Institute. Copyright Telecommunications Industry Association 2012 Copyright Alliance for Telecommunications Industry Solutions 2012 All rights reserved This document is subject to change. NOTICE OF COPYRIGHT This document is issued under a joint copyright by the Telecommunications In

16、dustry Association and the Alliance for Telecommunications Industry Solutions, and may not be reproduced without permission. Reproduction of these documents either in hard copy or soft copy (including posting on the web) is prohibited without copyright permission. For copyright permission to reprodu

17、ce portions of this document, please contact TIA Standards Department or go to the TIA website (www.tiaonline.org) for details on how to request permission. Details are located at: http:/www.tiaonline.org/about/faqDetail.cfm?id=18 Organizations may obtain permission to reproduce a limited number of

18、copies by entering into a license agreement. For information, contact: Global Engineering Documents 15 Inverness Way East Englewood, CO 80112-5704 or call U.S.A. and Canada (1-800-854-7179) International (303) 397-7956 OR ATIS Document Center: http:/www.atis.org/docstore/default.aspx Alliance for Te

19、lecommunications Industry Solutions 1200 G Street, NW Suite 500 Washington, DC 20005 (202) 628-6380 NOTICE OF DISCLAIMER AND LIABILITY The document to which this Notice is affixed (the “Document”) has been prepared by one or more Engineering Committees or Formulating Groups of the Telecommunications

20、 Industry Association (“TIA”). In addition, the Document was balloted by ATIS Wireless Technologies and Systems Committee and ATIS Packet Technologies and Systems Committee. TIA is not the author of the Document contents, but publishes and claims copyright to the Document pursuant to licenses and pe

21、rmission granted by the authors of the contents. TIA Engineering Committees and Formulating Groups are expected to conduct their affairs in accordance with the TIA Engineering Manual (“Manual”), the current and predecessor versions of which are available at http:/www.tiaonline.org/standards/sfg/engi

22、neering_manual.cfm. The ATIS Wireless Technologies and Systems Committee and ATIS Packet Technologies and Systems Committee is expected to conduct its affairs in accordance with the ATIS Operating Procedures which is available at http:/www.atis.org/legal/op.asp. . TIAs function is to administer the

23、process, but not the content, of document preparation in accordance with the Manual and, when appropriate, the policies and procedures of the American National Standards Institute (“ANSI”). Likewise, ATIS function, and on behalf of its Committees and Forums, is to administer the process according to

24、 its Operating Procedures, but not develop the content of the document. TIA and ATIS do not evaluate, test, verify or investigate the information, accuracy, soundness, or credibility of the contents of the Document. In publishing the Document, TIA and ATIS disclaim any undertaking to perform any dut

25、y owed to or for anyone. If the Document is identified or marked as a project number (PN) document, or as a standards proposal (SP) document, persons or parties reading or in any way interested in the Document are cautioned that: (a) the Document is a proposal; (b) there is no assurance that the Doc

26、ument will be approved by any Committee of TIA or any other body in its present or any other form; (c) the Document may be amended, modified or changed in the standards development or any editing process. The use or practice of contents of this Document may involve the use of intellectual property r

27、ights (“IPR”), including pending or issued patents, or copyrights, owned by one or more parties. Neither TIA nor ATIS makes any search or investigation for IPR. When IPR consisting of patents and published pending patent applications are claimed and called to TIAs attention, a statement from the hol

28、der thereof is requested, all in accordance with the Manual. When IPR consisting of patents are claimed and called to ATISs attention, a statement from the holder thereof is requested, all in accordance with the ATISs Operating Procedures. Neither TIA nor ATIS takes any position with reference to, a

29、nd disclaims any obligation to investigate or inquire into, the scope or validity of any claims of IPR. Neither TIA or ATIS will neither be a party to discussions of any licensing terms or conditions, which are instead left to the parties involved, nor will TIA or ATIS opine or judge whether propose

30、d licensing terms or conditions are reasonable or non-discriminatory. TIA does not warrant or represent that procedures or practices suggested or provided in the Manual have been complied with as respects the Document or its contents. TIA and ATIS do not enforce or monitor compliance with the conten

31、ts of the Document. TIA and ATIS do not certify, inspect, test or otherwise investigate products, designs or services or any claims of compliance with the contents of the Document. ALL WARRANTIES, EXPRESS OR IMPLIED, ARE DISCLAIMED, INCLUDING WITHOUT LIMITATION, ANY AND ALL WARRANTIES CONCERNING THE

32、 ACCURACY OF THE CONTENTS, ITS FITNESS OR APPROPRIATENESS FOR A PARTICULAR PURPOSE OR USE, ITS MERCHANTABILITY AND ITS NON-INFRINGEMENT OF ANY THIRD PARTYS INTELLECTUAL PROPERTY RIGHTS. TIA AND ATIS EXPRESSLY DISCLAIM ANY AND ALL RESPONSIBILITIES FOR THE ACCURACY OF THE CONTENTS AND MAKE NO REPRESEN

33、TATIONS OR WARRANTIES REGARDING THE CONTENTS COMPLIANCE WITH ANY APPLICABLE STATUTE, RULE OR REGULATION, OR THE SAFETY OR HEALTH EFFECTS OF THE CONTENTS OR ANY PRODUCT OR SERVICE REFERRED TO IN THE DOCUMENT OR PRODUCED OR RENDERED TO COMPLY WITH THE CONTENTS. NEITHER TIA NOR ATIS SHALL BE LIABLE FOR

34、 ANY AND ALL DAMAGES, DIRECT OR INDIRECT, ARISING FROM OR RELATING TO ANY USE OF THE CONTENTS CONTAINED HEREIN, INCLUDING WITHOUT LIMITATION ANY AND ALL INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES (INCLUDING DAMAGES FOR LOSS OF BUSINESS, LOSS OF PROFITS, LITIGATION, OR THE LIKE), WHETHER

35、BASED UPON BREACH OF CONTRACT, BREACH OF WARRANTY, TORT (INCLUDING NEGLIGENCE), PRODUCT LIABILITY OR OTHERWISE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. THE FOREGOING NEGATION OF DAMAGES IS A FUNDAMENTAL ELEMENT OF THE USE OF THE CONTENTS HEREOF, AND THESE CONTENTS WOULD NOT BE PUBLISHED

36、BY TIA WITHOUT SUCH LIMITATIONS.ANSI/J-STD-025-B1234567891011121314151617181920212223242526272829303132333435363738394041424344454647484950515253545556575859iii AbstractAbstractThis Standard defines the interfaces between a telecommunication service provider (TSP) and a Law Enforcement Agency (LEA)

37、to assist the LEA in conducting lawfully authorized electronic surveillance. A TSP, manufacturer, or support service provider that is in compliance with this Standard will have a “safe harbor” under Section 107 of the Communications Assistance for Law Enforcement Act (CALEA), Public Law 103-414: “a

38、TSP shall be found to be in compliance with the assistance capability requirements under CALEA Section 103, and a manufacturer of telecommunication transmission or switching equipment or a provider of telecommunication support services shall be found in compliance with CALEA Section 106.”J-STD-025-A

39、 provides the enhancements necessary to support FCC 99-230, CC Docket No. 97-213, Third Report and Order and FCC 02-108, CC Docket No. 97-213, Order on Remand1. J-STD-025-B provides enhancements to further support lawfully authorized electronic surveillance of packet data telecommunication services

40、(e.g., cdma20002packet data). 1.The FCC Third Report and Order FCC 99-230, CC Docket No. 97-213 introductory paragraph states the fol-lowing: “Specifically, we require that all capabilities of J-STD-025 (interim standard) and six of nine “punch list“ capabilities requested by the Department of Justi

41、ce (DoJ)/Federal Bureau of Investigation (FBI) be implemented by wireline, cellular, and broadband PCS carriers. While we are requiring that a packet-mode capability be implemented by such carriers, we are not at this time adopting technical requirements for packet-mode communications, but will perm

42、it packet-mode data to be delivered to law enforcement under the interim standard, discussed below, pending further study of packet-mode communications by the telecommunications industry.”2. cdma2000 is a registered trademark of the Telecommunications Industry Association (TIA-USA).ANSI/J-STD-025-B

43、Document Revision History1234567891011121314151617181920212223242526272829303132333435363738394041424344454647484950515253545556575859ivDocument Revision HistoryRevision Date Remarks 0 November 1997 Initial A February 2003 Revised to meet the requirements defined in FCC 99-230, CC Docket No. 97-213

44、and FCC 02-108, CC Docket No. 97-213.B January 2004 Revised to include enhancements for packet based telecommunica-tion technologies. J-STD-025-B is both a T1 Trial Use standard and a TIA standard.B June 2004 ANSI upgrade to include enhancements for packet based telecom-munication technologies. ANSI

45、/J-STD-025-B1234567891011121314151617181920212223242526272829303132333435363738394041424344454647484950515253545556575859v ContentsContentsAbstract iiiDocument Revision History ivContents .vList of Tables xiList of Figures xiiiForeword xv1 Introduction 11.1 General 11.2 Purpose 21.3 Scope .21.4 Orga

46、nization 22 References 33 Definitions and Acronyms .64 Stage 1 Description: User Perspective .184.1 Overview .184.2 Introduction .184.2.1 Assumptions 184.2.2 General Background 214.2.3 Call Content Channels and Call Data Channels 224.3 Non-Call Associated Information Surveillance Service Description

47、Serving System IAP .234.4 Call Associated Information Surveillance Service DescriptionCall-Identifying Informa-tion IAP .244.4.1 Introduction .244.4.2 Basic Circuit Calls .254.4.3 Conference Call Party Changes .254.5 Call Associated and Non-Call Associated Information Surveillance Service Descriptio

48、n .264.5.1 Introduction .264.5.2 Intercept Subject Signaling IAP 264.5.2.1 Subject-initiated Dialing and Signaling 264.5.2.2 Dialed Digit Extraction .264.5.3 Network Signaling IAP .274.5.3.1 In-band and Out-of-band Signaling .274.6 Content Surveillance Service Description 274.6.1 Circuit IAP 284.6.2

49、 Conference Circuit IAP - Content of Subject-initiated Conference Calls .324.6.3 Packet Data IAP 334.7 Timing Information .374.8 Restrictions 384.8.1 Lack of CDC and CCC Synchronization .384.8.2 CDC Congestion 384.8.3 CCC Exhaustion 38ANSI/J-STD-025-B Contents1234567891011121314151617181920212223242526272829303132333435363738394041424344454647484950515253545556575859vi4.8.4 CCC Congestion . 384.9 Packet Mode Technology . 394.9.1 Introduction and Scope . 394.9.2 cdma2000 Packet Data 404.9.2.1 cdma2000 Packet Data System Reference Model . 404.9.2.2 General P