ETSI TS 127 060-2017 Digital cellular telecommunications system (Phase 2+) (GSM) Universal Mobile Telecommunications System (UMTS) LTE Packet domain Mobile Station (MS) supporting .pdf

《ETSI TS 127 060-2017 Digital cellular telecommunications system (Phase 2+) (GSM) Universal Mobile Telecommunications System (UMTS) LTE Packet domain Mobile Station (MS) supporting .pdf》由会员分享，可在线阅读，更多相关《ETSI TS 127 060-2017 Digital cellular telecommunications system (Phase 2+) (GSM) Universal Mobile Telecommunications System (UMTS) LTE Packet domain Mobile Station (MS) supporting .pdf（35页珍藏版）》请在麦多课文档分享上搜索。

1、 ETSI TS 127 060 V14.0.0 (2017-04) Digital cellular telecommunications system (Phase 2+) (GSM); Universal Mobile Telecommunications System (UMTS); LTE; Packet domain; Mobile Station (MS) supporting Packet Switched services (3GPP TS 27.060 version 14.0.0 Release 14) TECHNICAL SPECIFICATION ETSI ETSI

2、TS 127 060 V14.0.0 (2017-04)13GPP TS 27.060 version 14.0.0 Release 14Reference RTS/TSGC-0327060ve00 Keywords GSM,LTE,UMTS ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16 Siret N 348 623 562 00017 - NAF 742 C Association but non lucra

3、tif enregistre la Sous-Prfecture de Grasse (06) N 7803/88 Important notice The present document can be downloaded from: http:/www.etsi.org/standards-search The present document may be made available in electronic versions and/or in print. The content of any electronic and/or print versions of the pr

4、esent document shall not be modified without the prior written authorization of ETSI. In case of any existing or perceived difference in contents between such versions and/or in print, the only prevailing document is the print of the Portable Document Format (PDF) version kept on a specific network

5、drive within ETSI Secretariat. Users of the present document should be aware that the document may be subject to revision or change of status. Information on the current status of this and other ETSI documents is available at https:/portal.etsi.org/TB/ETSIDeliverableStatus.aspx If you find errors in

6、 the present document, please send your comment to one of the following services: https:/portal.etsi.org/People/CommiteeSupportStaff.aspx Copyright Notification No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm except as

7、 authorized by written permission of ETSI. The content of the PDF version shall not be modified without the written authorization of ETSI. The copyright and the foregoing restriction extend to reproduction in all media. European Telecommunications Standards Institute 2017. All rights reserved. DECTT

8、M, PLUGTESTSTM, UMTSTMand the ETSI logo are Trade Marks of ETSI registered for the benefit of its Members. 3GPPTM and LTE are Trade Marks of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. GSM and the GSM logo are Trade Marks registered and owned by the GSM As

9、sociation. ETSI ETSI TS 127 060 V14.0.0 (2017-04)23GPP TS 27.060 version 14.0.0 Release 14Intellectual Property Rights IPRs essential or potentially essential to the present document may have been declared to ETSI. The information pertaining to these essential IPRs, if any, is publicly available for

10、 ETSI members and non-members, and can be found in ETSI SR 000 314: “Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respect of ETSI standards“, which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web server (https

11、:/ipr.etsi.org/). Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or may become, essent

12、ial to the present document. Foreword This Technical Specification (TS) has been produced by ETSI 3rd Generation Partnership Project (3GPP). The present document may refer to technical specifications or reports using their 3GPP identities, UMTS identities or GSM identities. These should be interpret

13、ed as being references to the corresponding ETSI deliverables. The cross reference between GSM, UMTS, 3GPP and ETSI identities can be found under http:/webapp.etsi.org/key/queryform.asp. Modal verbs terminology In the present document “shall“, “shall not“, “should“, “should not“, “may“, “need not“,

14、“will“, “will not“, “can“ and “cannot“ are to be interpreted as described in clause 3.2 of the ETSI Drafting Rules (Verbal forms for the expression of provisions). “must“ and “must not“ are NOT allowed in ETSI deliverables except when used in direct citation. ETSI ETSI TS 127 060 V14.0.0 (2017-04)33

15、GPP TS 27.060 version 14.0.0 Release 14Contents Intellectual Property Rights 2g3Foreword . 2g3Modal verbs terminology 2g3Foreword . 5g3Introduction 5g31 Scope 6g32 References 6g33 Definitions abbreviations and symbols 8g33.1 Definitions 8g33.2 Abbreviations . 8g33.3 Symbols 9g34 Access reference con

16、figuration 9g35 Functions to support data services 10g36 Interface to Packet Domain Bearer Services 10g36.1 A/Gb mode . 10g36.2 Iu mode . 11g37 Functions common to all configurations of a MS supporting Packet Switched Services 11g37.1 Mobile Station Modes of Operation . 11g37.2 Physical Interface .

17、11g37.3 Terminal context procedures 11g37.3.1 PS Attach 11g37.3.2 PS Detach . 12g37.3.3 MS Originated PDP Context Activation . 12g37.3.4 MS Originated Secondary PDP Context Activation . 12g37.3.5 Network Requested PDP Context Activation. 12g37.3.6 MS-Initiated PDP Context Modification 12g37.3.7 PDP

18、Context Deactivation 12g37.3.8 PDP context related parameters 12g37.3.8.1 MS in A/Gb mode . 12g37.3.8.2 MS in Iu mode . 13g38 . 13g39 IP Based Services . 13g39.1 Example mapping of functions between the R reference point and the Packet Domain bearer for IP over PPP . 14g39.1.1 IPv4 over PPP . 15g39.

19、1.2 IPv6 over PPP . 17g39.2 Example mapping of functions between the R reference point and the Packet Domain bearer for IP over MCML PPP 19g310 PPP Based Services 20g310.1 Example mapping of functions between the R reference point and the Packet Domain bearer (transparent PPP negotiation) . 21g310.2

20、 Example mapping of functions between the R reference point and the Packet Domain bearer (relayed PPP negotiation) . 22g311 Internet Hosted Octet Stream Service (IHOSS) . 23g312 AT commands 23g312.1 General on AT commands 24g312.1.1 Interaction of AT commands, Packet Domain management and PDPs 24g31

21、2.1.1.1 AT commands and responses 24g3ETSI ETSI TS 127 060 V14.0.0 (2017-04)43GPP TS 27.060 version 14.0.0 Release 1412.1.1.2 PDP and layer 2 protocol operation 24g312.1.1.3 Management of Packet Switched services 24g312.1.1.3.1 PS attachment 24g312.1.1.3.2 PDP context activation 25g312.1.2 Use of de

22、fault context parameter values . 25g312.1.2.1 PDP type . 25g312.1.2.2 PDP address (of the MS) . 25g312.1.2.3 Access Point Name . 25g312.1.2.4 QoS Requested 25g312.1.2.5 PDP Configuration Options 26g312.2 Example command sequences for dial-compatibility mode . 26g312.2.1 PPP in dial compatibility mod

23、e. 26g312.2.1.1 Mobile initiated IP context activation . 26g312.2.1.2 Network requested IP context activation. 27g313 IMS related functions . 29g313.1 General . 29g313.2 DNS Server Discovery . 29g313.3 P-CSCF Server Discovery 29g313.4 PDP Context used for IMS Signalling 29g313.5 Binding Information

24、. 29g313.6 Mapping of SDP to QoS Attributes 30g313.7 Authorization of QoS Attributes 30g313.8 Support for forking . 30g313.9 Multiplexing of IMS media components to PDP contexts . 30g313.10 Policy control rejection of PDP context . 30g3Annex A (informative): Summary of AT commands for the Packet Dom

25、ain . 31g3Annex B (informative): Octet Stream Protocol (OSP) PDP type . 32g3Annex C (informative): Change history . 33g3History 34g3ETSI ETSI TS 127 060 V14.0.0 (2017-04)53GPP TS 27.060 version 14.0.0 Release 14Foreword This Technical Specification (TS) has been produced by the 3rdGeneration Partner

26、ship Project (3GPP). The present document defines the requirements for TE-MT interworking over the R-reference point for the Packet Domain, within the 3GPP systems. The contents of the present document are subject to continuing work within the TSG and may change following formal TSG approval. Should

27、 the TSG modify the contents of the present document, it will be re-released by the TSG with an identifying change of release date and an increase in version number as follows: Version x.y.z where: x the first digit: 1 presented to TSG for information; 2 presented to TSG for approval; 3 or greater i

28、ndicates TSG approved document under change control. y the second digit is incremented for all changes of substance, i.e. technical enhancements, corrections, updates, etc. z the third digit is incremented when editorial only changes have been incorporated in the document. Introduction The present d

29、ocument defines the requirements for TE-MT interworking over the R-reference point for the Packet Domain, within the 3GPP systems. It is up to the manufacturer how to implement the various functions but the present document and existing 3GPP TS 27.001, 27.002, and 27.003 shall be followed where appl

30、icable. It is the intention that the present document shall remain as the specification to develop a MS for support of Packet Switched services and its text includes references to 3GPP standards. ETSI ETSI TS 127 060 V14.0.0 (2017-04)63GPP TS 27.060 version 14.0.0 Release 141 Scope The (A/Gb and Iu

31、mode) PLMN supports a wide range of voice and non-voice services in the same network. In order to enable non-voice traffic in the PLMN there is a need to connect various kinds of terminal equipments to the Mobile Station (MS). The present document defines the requirements for TE-MT interworking over

32、 the R-reference point for the Packet Domain , including the protocols and signalling needed to support Packet Switched services, as defined in 3GPP TS 22.060 and 3GPP TS 23.060. The present document is valid for PLMN in A/Gb mode as well as for PLMN in Iu mode. If text applies only for one of these

33、 systems it is explicitly mentioned by using the terms “A/Gb mode“ and “Iu mode“. Please note, that the A interface does not play any role in the scope of this document although the term “A/Gb mode“ is used. 2 References The following documents contain provisions which, through reference in this tex

34、t, constitute provisions of the present document. References are either specific (identified by date of publication, edition number, version number, etc.) or non-specific. For a specific reference, subsequent revisions do not apply. For a non-specific reference, the latest version applies. 1 Void. 2

35、 Void. 3 3GPP TS 22.060: “General Packet Radio Service (GPRS); Service Description Stage 1“. 4 Void. 5 Void. 6 Void. 7 Void. 8 Void. 9 3GPP TS 23.060: “General Packet Radio Service (GPRS) Service Description Stage 2“. 10 Void. 11 Void. 12 3GPP TS 24.008: “Mobile radio interface layer 3 specification

36、; Core Network protocols; Stage 3“. 13 Void. 14 Void. 15 Void. 16 3GPP TS 27.007: “AT command set for 3GPP User Equipment (UE)“. 17 3GPP TS 29.061: “Packet Domain; Interworking between the Public Land Mobile Network (PLMN) supporting Packet Based Services and Packet Data Networks (PDN)“. 18 ITU-T Re

37、commendation E.164 (02/05): “Numbering plan for the ISDN era“. 19 ITU-T Recommendation V.42 bis (01/90): “Data communication over the telephone network Data compression procedures for data circuit-terminating equipment (DCE) using error correction procedures“. ETSI ETSI TS 127 060 V14.0.0 (2017-04)7

38、3GPP TS 27.060 version 14.0.0 Release 1420 Void. 21 Void. 22 Void. 23 Void. 24 Void. 25 Void. 26 IETF RFC 768 (1980): “User Datagram Protocol“ (STD 6). 27 IETF RFC 791 (1981): “Internet Protocol“ (STD 5). 28 IETF RFC 792 (1981): “Internet Control Message Protocol“ (STD 5). 29 IETF RFC 793 (1981): “T

39、ransmission Control Protocol“ (STD 7). 30 ITU-T Recommendation V.250 (ex V.25ter) (05/99): “Serial asynchronous automatic dialling and control“. 31 ITU-T Recommendation V.24 (10/96): “List of definitions for interchange circuits between data terminal equipment (DTE) and data circuit-terminating equi

40、pment (DCE)“. 32 ITU-T Recommendation V.28 (03/93): “Electrical Characteristics for unbalanced double-current interchange circuits“. 33 ITU-T Recommendation V.80 (08/96): “In-band DCE control and synchronous data modes for asynchronous DTE“. 34 IETF RFC 1661 (1994): “The Point-to-Point Protocol (PPP

41、)“ (STD 51). 35 IETF RFC 1662 (1994): “PPP in HDLC-like framing“ (STD 51). 36 IETF RFC 1700 (1994): “Assigned Numbers“ (STD 2). 37 IETF RFC 1570 (1994): “PPP LCP Extensions“. 38 IETF RFC 1989 (1996): “PPP Link Quality Monitoring“. 39 IETF RFC 1332 (1992): “The PPP Internet Protocol Control Protocol

42、(IPCP)“. 40 IETF RFC 1877 (1995): “PPP IPCP Extensions for Name Server Addresses “. 41 IETF RFC 2153 (1997): “PPP Vendor Extensions“. 42 IETF RFC 1334 (1992): “PPP Authentication Protocols“. 43 IETF RFC 1994 (1996): “PPP Challenge Handshake Authentication Protocol“. 44 IETF RFC 2686 (1999): “The Mul

43、ti-Class Extension to Multi-Link PPP“. 45 IETF RFC 1990 (1996): “The PPP Multilink Protocol (MP)“. 46 IETF RFC 2472 (1998): “IP Version 6 over PPP“. 47 3GPP TR 21.905: “Vocabulary for 3GPP Specifications“. 48 3GPP TS 23.221: “Architectural requirements“. 49 IETF RFC 2373 (1998): “IP version 6 Addres

44、sing Architecture“. 50 3GPP TS 24.228: “Signalling flows for the IP multimedia call control based on SIP and SDP; Stage 3“ 51 3GPP TS 24.229: “ IP Multimedia Call Control Protocol based on SIP and SDP; Stage 3“. ETSI ETSI TS 127 060 V14.0.0 (2017-04)83GPP TS 27.060 version 14.0.0 Release 1452 3GPP T

45、S 29.207: “Policy control over Go interface“. 53 3GPP TS 29.208: “End-to-end QoS signalling flows“. 54 IETF RFC 3261 (March 2002): “SIP: Session Initiation Protocol“. 55 IETF RFC 3315 (2003): “Dynamic Host Configuration Protocol for IPv6 (DHCPv6)“ R. Droms, J. Bound, B. Volz, T. Lemon, C. Perkins, M

46、. Carney. 56 IETF RFC 1034 (1987): “Domain Names - Concepts and Facilities“ (STD 13). 57 IETF RFC 1035 (1987): “Domain Names - Implementation and Specification“ (STD 13). 58 IETF RFC 1886 (1995): “DNS Extensions to support IP version 6“. 3 Definitions abbreviations and symbols 3.1 Definitions For th

47、e purposes of the present document, the following terms and definitions given in 3GPP TS 22.060 and 3GPP TS 23.060 and the following apply: 2G- / 3G-: prefixes 2G- and 3G- refers to functionality that supports only A/Gb mode or Iu mode, respectively, e.g., 2G-SGSN refers only to the A/Gb mode functi

48、onality of an SGSN. When the prefix is omitted, reference is made independently from the A/Gb mode or Iu mode functionality. A/Gb mode: indicates that the text applies only to a system or sub-system which operate in A/Gb mode of operation, i.e. with a functional division that is in accordance with t

49、he use of an A or a Gb interface between the radio access network and the core network Iu mode: indicates that the text applies only to a system or a sub-system which operates in Iu mode of operation, i.e. with a functional division that is in accordance with the use of an Iu-CS or Iu-PS interface between the radio access network and the core network 3.2 Abbreviations For the purposes of the present document, the following abbreviations apply: APN Access