ATIS 0700036A-2018 ATIS Supplement A to ATIS-0700036 Enhanced Wireless Emergency Alert (eWEA) Mobile Device Behavior (MDB) Specification.pdf

《ATIS 0700036A-2018 ATIS Supplement A to ATIS-0700036 Enhanced Wireless Emergency Alert (eWEA) Mobile Device Behavior (MDB) Specification.pdf》由会员分享，可在线阅读，更多相关《ATIS 0700036A-2018 ATIS Supplement A to ATIS-0700036 Enhanced Wireless Emergency Alert (eWEA) Mobile Device Behavior (MDB) Specification.pdf（6页珍藏版）》请在麦多课文档分享上搜索。

1、 ATIS-0700036.a ATIS Standard on - ATIS Supplement A to ATIS-0700036, Enhanced Wireless Emergency Alert (eWEA) Mobile Device Behavior (MDB) Specification As a leading technology and solutions development organization, the Alliance for Telecommunications Industry Solutions (ATIS) brings together the

2、top global ICT companies to advance the industrys most pressing business priorities. ATIS nearly 200 member companies are currently working to address the All-IP transition, 5G, network functions virtualization, big data analytics, cloud services, device solutions, emergency services, M2M, cyber sec

3、urity, network evolution, quality of service, billing support, operations, and much more. These priorities follow a fast-track development lifecycle from design and innovation through standards, specifications, requirements, business use cases, software toolkits, open source solutions, and interoper

4、ability testing. ATIS is accredited by the American National Standards Institute (ANSI). The organization is the North American Organizational Partner for the 3rd Generation Partnership Project (3GPP), a founding Partner of the oneM2M global initiative, a member of the International Telecommunicatio

5、n Union (ITU), as well as a member of the Inter-American Telecommunication Commission (CITEL). For more information, visit www.atis.org. Notice of Disclaimer & Limitation of Liability The information provided in this document is directed solely to professionals who have the appropriate degree of exp

6、erience to understand and interpret its contents in accordance with generally accepted engineering or other professional standards and applicable regulations. No recommendation as to products or vendors is made or should be implied. NO REPRESENTATION OR WARRANTY IS MADE THAT THE INFORMATION IS TECHN

7、ICALLY ACCURATE OR SUFFICIENT OR CONFORMS TO ANY STATUTE, GOVERNMENTAL RULE OR REGULATION, AND FURTHER, NO REPRESENTATION OR WARRANTY IS MADE OFMERCHANTABILITY OR FITNESS FOR ANY PARTICULAR PURPOSE OR AGAINST INFRINGEMENT OF INTELLECTUAL PROPERTY RIGHTS. ATIS SHALL NOT BE LIABLE, BEYOND THE AMOUNT O

8、F ANY SUM RECEIVED IN PAYMENT BY ATIS FOR THIS DOCUMENT, AND IN NO EVENT SHALL ATIS BE LIABLE FOR LOST PROFITS OR OTHER INCIDENTAL OR CONSEQUENTIAL DAMAGES. ATIS EXPRESSLY ADVISES THAT ANY AND ALL USE OF OR RELIANCE UPON THE INFORMATION PROVIDED IN THIS DOCUMENT IS AT THE RISK OF THE USER. NOTE - Th

9、e users attention is called to the possibility that compliance with this standard may require use of an invention covered by patent rights. By publication of this standard, no position is taken with respect to whether use of an invention covered by patent rights will be required, and if any such use

10、 is required no position is taken regarding the validity of this claim or any patent rights in connection therewith. Please refer to http:/www.atis.org/legal/patentinfo.asp to determine if any statement has been filed by a patent holder indicating a willingness to grant a license either without comp

11、ensation or on reasonable and non-discriminatory terms and conditions to applicants desiring to obtain a license. Published by Alliance for Telecommunications Industry Solutions 1200 G Street, NW, Suite 500 Washington, DC 20005 Copyright 2018 by Alliance for Telecommunications Industry Solutions All

12、 rights reserved. No part of this publication may be reproduced in any form, in an electronic retrieval system or otherwise, without the prior written permission of the publisher. For information contact ATIS at 202.628.6380. ATIS is online at . ATIS-0700036.a ATIS Supplement A to ATIS-0700036, Enha

13、nced Wireless Emergency Alert (eWEA) Mobile Device Behavior (MDB) Specification Alliance for Telecommunications Industry Solutions Approved June 2018 Abstract This Supplement provides modifications to ATIS-0700036, Enhanced Wireless Emergency Alert (eWEA) Mobile Device Behavior (MDB) Specification.

14、ATIS-0700036.a ii Foreword The Alliance for Telecommunication Industry Solutions (ATIS) serves the public through improved understanding between carriers, customers, and manufacturers. The Wireless Technologies and Systems Committee (WTSC) develops and recommends standards and technical reports rela

15、ted to wireless and/or mobile services and systems, including service descriptions and wireless technologies. WTSC develops and recommends positions on related subjects under consideration in other North American, regional, and international standards bodies. The mandatory requirements are designate

16、d by the word shall and recommendations by the word should. Where both a mandatory requirement and a recommendation are specified for the same criterion, the recommendation represents a goal currently identifiable as having distinct compatibility or performance advantages. The word may denotes an op

17、tional capability that could augment the standard. The standard is fully functional without the incorporation of this optional capability. Suggestions for improvement of this document are welcome. They should be sent to the Alliance for Telecommunications Industry Solutions, WTSC 1200 G Street NW, S

18、uite 500, Washington, DC 20005. At the time of consensus on this document, WTSC, which was responsible for its development, had the following leadership: D. Zelmer, WTSC Chair (AT&T) M. Younge, WTSC Vice Chair (T-Mobile) P. Musgrove, WTSC SN Chair (AT&T) G. Schumacher, WTSC SN Vice Chair (Sprint) Th

19、e ATIS WTSC SN subcommittee was responsible for the development of this document. ATIS-0700036.a iii Table of Contents 1 Scope & Purpose . 1 2 Modifications 1 2.1 Modification to Section 9.2 1 ATIS STANDARD ATIS-0700036.a ATIS Standard on ATIS Supplement A to ATIS-0700036, Enhanced Wireless Emergenc

20、y Alert (eWEA) Mobile Device Behavior (MDB) Specification 1 1 Scope & Purpose The scope of this Supplement is ATIS-0700036, Enhanced Wireless Emergency Alert (eWEA) Mobile Device Behavior (MDB) Specification. The purpose of this Supplement is to provide modifications to ATIS-0700036 to state that mo

21、bile devices shall not connect to embedded URLs automatically. Upon publication, this Supplement shall be used in conjunction with ATIS-0700036. 2 Modifications 2.1 Modification to Section 9.2 Section 9.2, eWEA Message Initiation of Other Functions on the Mobile Device, is modified as show below: Th

22、e FCC First Report and Order, FCC 08-99 Ref 1 states the following: “A CMAS Alert Message processed by a Participating CMS Provider must not include an embedded URL, which is a reference (an address) to a resource on the internet, or an embedded telephone number. This prohibition does not apply to P

23、residential Alerts.” However, on September 29, 2016, the FCC issued a new Report & Order on WEA Enhancements Ref 9 which supersedes the above restrictions on embedded URLs and embedded telephone numbers. In 47 CFR. Section 10.441 of Appendix A Final Rules of the FCC Report and Order on WEA Enhanceme

24、nts, FCC 16-127 Ref 9, all restrictions have been removed for all eWEA messages regarding embedded URL or embedded telephone number. Embedded URLs and telephone numbers are allowed in all eWEA messages. The previous 47 CFR. Section 10.440 defining the URL and telephone number restrictions has been r

25、emoved in Appendix A Final Rules of the FCC Report and Order on WEA Enhancements, FCC 16-127 Ref 9. 1. The mobile device shall present the displayable text of the alert message as received. 2. The mobile device shall support additional functions such as providing hyperlinks which allows user initiation of phone calls or data sessions using an embedded telephone number or URL. NOTE: The URL syntax is defined in IETF RFC 3986 Ref 10. 3. The mobile device shall not connect to embedded URLs automatically.