ASTM F1910-1998(2008) Standard Specification for Long Barbed Tape Obstacles《长的有倒刺带状障碍物的标准规范》.pdf

《ASTM F1910-1998(2008) Standard Specification for Long Barbed Tape Obstacles《长的有倒刺带状障碍物的标准规范》.pdf》由会员分享，可在线阅读，更多相关《ASTM F1910-1998(2008) Standard Specification for Long Barbed Tape Obstacles《长的有倒刺带状障碍物的标准规范》.pdf（4页珍藏版）》请在麦多课文档分享上搜索。

1、Designation: F 1910 98 (Reapproved 2008)Standard Specification forLong Barbed Tape Obstacles1This standard is issued under the fixed designation F 1910; the number immediately following the designation indicates the year oforiginal adoption or, in the case of revision, the year of last revision. A n

2、umber in parentheses indicates the year of last reapproval. Asuperscript epsilon () indicates an editorial change since the last revision or reapproval.1. Scope1.1 This specification covers barbed tape materials andconfigurations used for security barriers.2. Referenced Documents2.1 ASTM Standards:2

3、A 176 Specification for Stainless and Heat-Resisting Chro-mium Steel Plate, Sheet, and StripA 240/A 240M Specification for Chromium andChromium-Nickel Stainless Steel Plate, Sheet, and Stripfor Pressure Vessels and for General ApplicationsA 370 Test Methods and Definitions for Mechanical Testingof S

4、teel ProductsA 666 Specification for Annealed or Cold-Worked Austen-itic Stainless Steel Sheet, Strip, Plate, and Flat BarA 764 Specification for Metallic Coated Carbon Steel Wire,Coated at Size and Drawn to Size for Mechanical SpringsF 1379 Terminology Relating to Barbed Tape3. Terminology3.1 Refer

5、 to Terminology F 1379.4. Classification4.1 Refer to 5.1.8.5. Ordering/Specifying Information5.1 Ordering or specifying barbed tape shall include thefollowing information as per sample specification, or byreferencing item numbers in Tables 1 and 2 (indicate number ofloops, if applicable). Material f

6、urnished under this specificationshall conform to applicable requirements of current editions ofASTM Standards.NOTE 1The following sample specification is provided to assist whenspecifying or ordering barbed tape material.Actual size and style will varyby individual job requirements.Sample Specifica

7、tion OnlyBarbed tape obstacle shall be 30 in.diameter (62 in.). Each loop shall consist of 24 (61) clusters of fourneedle-sharp barbs on 4 in. centers, each barb measuring a minimum of1.2 in. in length. The barbed tape shall be fabricated from Series 430stainless steel with optional hardness. The ba

8、rbed tape shall be perma-nently coldclenched over an austenitic mechanical spring core wire. Thewire shall have a diameter of 0.098 in. with a minimum tensile strength ofapproximately 140 psi. The barbed tape shall have a minimum 230 wrapabout the core wire. Adjacent alternate loops shall be clipped

9、 together infive (5) locations around the circumference to obtain the concertina effect.Clip spacing of the extended coil shall be 12 6 2 in. Clips shall be capableof withstanding a minimum pull load of 200 lb. Each coil shall contain 51loops and cover 25 6 1 ft.5.1.1 QuantityThe number of units of

10、barbed tape re-quired. For fixed length units, the length per unit should bespecified.5.1.2 Description Barbed tape shall be described as singlecoil helical, single coil concertina, double coil concertina, ordouble coil helical.5.1.3 DiameterThe purchaser shall specify the packageddiameter. When dou

11、ble coil products are specified, the innerand outer coil packaged diameters shall be given.5.1.4 Barb Length Refer to Terminology F 1379 andTables 1 and 2.5.1.5 Coil LoopsThe number of coil loops shall bespecified by the purchaser.5.1.6 Unit Length The purchaser shall specify the in-stalled length a

12、nd coil spacing, including the coil spacingtolerance.5.1.7 Number of attachment points, in accordance withTerminology F 1739 and Tables 1 and 2.5.1.8 Cross Sections The purchaser shall specify the crosssections in accordance with Terminology F 1379.6. Material6.1 Composition Barbed tape shall be man

13、ufactured fromstainless and galvanized steel in accordance with the ASTMstandards listed in Section 2. Manufacturers are not necessarilylimited to those materials listed.6.1.1 Stainless Steel Stainless steel strip shall be eitherferretic or austenitic. Stainless steel should be ordered to theAISA or

14、 UNS designations to ensure the correct chemistry.6.1.1.1 Ferritic stainless steels shall be produced in accor-dance with Specification A 176 or Specification A 240.1This specification is under the jurisdiction of ASTM Committee F14 on Fencesand is the direct responsibility of Subcommittee F14.40 on

15、 Chain Link Fence andWire Accessories.Current edition approved June 1, 2008. Published July 2008. Originally approvedin 1998. Last previous edition approved in 2003 as F 1910 - 98(2003).2For referenced ASTM standards, visit the ASTM website, www.astm.org, orcontact ASTM Customer Service at serviceas

16、tm.org. For Annual Book of ASTMStandards volume information, refer to the standards Document Summary page onthe ASTM website.1Copyright ASTM International, 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959, United States.6.1.1.2 Austenitic stainless steels shall be purchased inacc

17、ordance with Specification A 666.7. Dimensions and Permissible Variations7.1 Permissible variations within coil diameters shall be asspecified in Tables 1 and 2 for standard trade sizes.8. Workmanship, Finish and Appearance8.1 Workmanship Coil loops shall not be kinked, unless itis part of the desig

18、n.8.1.1 Each coil shall be one continuous length properlycoiled and firmly tied for shipping. Welds made in the stripprior to forming are permitted. A maximum of three splices percoil are permitted either by overlapping and welding orpermanently clamping together with a suitable device designedfor t

19、he purpose.8.2 Surfaces shall be smooth and free of rust with no seriousdefects, such as pits, die marks, and other defects to impair theintegrity of the product.9. Certification9.1 When specified in the purchase order or contract, amanufacturers certification of compliance shall be furnished tothe

20、purchaser showing the quantity, size and type of barbedtape. The certification of compliance shall state that therepresentative barbed tape is in accordance with the specifica-tion.10. Keywords10.1 barbed tapeTABLE 1 Stainless Steel Long Barbed Tape (Reinforced) (See Terminology F 1379, Figs. 2 and

21、3)NOTE 1Maximum barb point radius = 0.005 in.NOTE 2Minimum barb length = 1.2 in.NOTE 3Maximum barb spacing=4in.Item Num-berDescription Barbed Tape Ma-terialCore-Wire Material Barb ClustersPer LoopCoil Loops Coil Loop Spac-ing 62.0 in.Coil Length, ft AttachmentPointsHelical1 18 in. Single CoilHelical

22、430 SS 0.025 in.Thick0.098 SS 300 Series140 KSI (965 MPa)13 33 12 in.18 in.3350002 18 in. Single CoilHelical430 SS 0.025 in.Thick0.098 GalvanizedSteel Class III13 33 12 in.18 in.3350003 18 in. Single CoilHelical430 SS 0.025 in.Thick013312in.18 in.3350004 18 in. Type III SingleCoil Helical300 Series

23、SS0.025 in. Thick013312in.18 in.3350005 24 in. Single CoilHelical430 SS 0.025 in.Thick0.098 SS 300 Series140 KSI (965 MPa)19 6 133 12in.18 in.3350006 24 in. Single CoilHelical430 SS 0.025 in.Thick0.098 GalvanizedSteel Class III19 6 133 12in.18 in.3350007 24 in. Single CoilHelical430 SS 0.025 in.Thic

24、k0196 133 12in.18 in.335000Concertina8 18 in. Single Coil Con-certina430 SS 0.025 in.Thick0.098 GalvanizedSteel Class III13 315116 in.12 in.202503039 18 in. Single Coil Con-certina430 SS 0.025 in.Thick0.098 SS 300 Series140 KSI (965 MPa)13 315116 in.12 in.2025030310 24 in. Single Coil Con-certina430

25、 SS 0.025 in.Thick0.098 GalvanizedSteel Class III19 6 1315116 in.12 in.2025030311 24 in. Single Coil Con-certina430 SS 0.025 in.Thick0.098 SS 300 Series140 KSI (965 MPa)19 6 1315116 in.12 in.2025030312 30 in. Single Coil Con-certina430 SS 0.025 in.Thick0.098 GalvanizedSteel Class III24 6 1315116 in.

26、12 in.2025030313 30 in. Single Coil Con-certina430 SS 0.025 in.Thick0.098 SS 300 Series140 KSI (965 MPa)24 6 1315116 in.12 in.2025030314 30 in. Single Coil Con-certina430 SS 0.025 in.Thick0.098 GalvanizedSteel Class III24 6 1518110112 in.12 in.12 in.254050050505F 1910 98 (2008)2TABLE 1 ContinuedItem

27、 Num-berDescription Barbed Tape Ma-terialCore-Wire Material Barb ClustersPer LoopCoil Loops Coil Loop Spac-ing 62.0 in.Coil Length, ft AttachmentPoints15 30 in. Single Coil Con-certina430 SS 0.025 in.Thick0.098 SS 300 Series140 KSI (965 MPa)24 6 1518110112 in.12 in.12 in.25405005050516 40 in. Single

28、 Coil Con-certina430 SS 0.025 in.Thick0.098 GalvanizedSteel Class III31 6 1518112 in.12 in.254007070717 40 in. Single Coil Con-certina430 SS 0.025 in.Thick0.098 SS 300 Series140 KSI (965 MPa)31 6 1518112 in.12 in.2540050518 40 in. Single Coil Con-certina430 SS 0.025 in.Thick0.098 SS 300 Series140 KS

29、I (965 MPa)31 6 1518112 in.12 in.2540070719 60 in. Single Coil Con-certina430 SS 0.025 in.Thick0.098 GalvanizedSteel Class III45 6 1518112 in.12 in.2540090920 60 in. Single Coil Con-certina430 SS 0.025 in.Thick0.098 SS 300 Series140 KSI (965 MPa)45 6 1518112 in.12 in.2540090921 24/30 in. Double Coil

30、Concertina430 SS 0.025 in.Thick0.098 GalvanizedSteel Class III43 6 2 31 16/16 in. 20 322 24/30 in. Double CoilConcertina430 SS 0.025 in.Thick0.098 SS 300 Series140 KSI (965 MPa)43 6 2 31 16/16 in. 20 3F 1910 98 (2008)3TABLE 2 Non-Reinforced (See Terminology F 1379, Fig. 1)ItemNumberDescription Barbe

31、d TapeMaterialCore-WireMaterialBarb Clustersper LoopCoil Loops Coil LoopSpacing 62in.Coil Length, ft AttachmentPointsNumber of 7 37SS CablesDouble Helical23 24/30 GPBTOType II300 Series SS0.025 in. Thicknone 19/24 6 1 33/33 24/24 66 0 4-3/64Concertina24 24 in. SingleCoilConcertina300 Series SS0.025

32、in. Thicknone 19 6 1 101 12 in. 50 3 1-3/64 3 5/6425 30 in. SingleCoilConcertina300 Series SS0.025 in. Thicknone 24 6 1 101 12 in. 50 5 1-3/64 3 5/6426 40 in. SingleCoilConcertina300 Series SS0.025 in. Thicknone 31 6 1 101 12 in. 50 7 1-3/64 3 5/6427 60 in. SingleCoilConcertina300 Series SS0.025 in.

33、 Thicknone 45 6 1 101 12 in. 50 13 1-3/64 3 5/64ASTM International takes no position respecting the validity of any patent rights asserted in connection with any item mentionedin this standard. Users of this standard are expressly advised that determination of the validity of any such patent rights,

34、 and the riskof infringement of such rights, are entirely their own responsibility.This standard is subject to revision at any time by the responsible technical committee and must be reviewed every five years andif not revised, either reapproved or withdrawn. Your comments are invited either for rev

35、ision of this standard or for additional standardsand should be addressed to ASTM International Headquarters. Your comments will receive careful consideration at a meeting of theresponsible technical committee, which you may attend. If you feel that your comments have not received a fair hearing you

36、 shouldmake your views known to the ASTM Committee on Standards, at the address shown below.This standard is copyrighted by ASTM International, 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959,United States. Individual reprints (single or multiple copies) of this standard may be obtained by contacting ASTM at the aboveaddress or at 610-832-9585 (phone), 610-832-9555 (fax), or serviceastm.org (e-mail); or through the ASTM website(www.astm.org).F 1910 98 (2008)4