ASME STP-PT-034-2011 ASME CODE DEVELOPMENT ROADMAPFOR HOPE PIPE IN NUCLEAR SERVICE《ASME B31规范中恒载压力指数的校准》.pdf

《ASME STP-PT-034-2011 ASME CODE DEVELOPMENT ROADMAPFOR HOPE PIPE IN NUCLEAR SERVICE《ASME B31规范中恒载压力指数的校准》.pdf》由会员分享，可在线阅读，更多相关《ASME STP-PT-034-2011 ASME CODE DEVELOPMENT ROADMAPFOR HOPE PIPE IN NUCLEAR SERVICE《ASME B31规范中恒载压力指数的校准》.pdf（67页珍藏版）》请在麦多课文档分享上搜索。

1、 STP-PT-034 ALIGNMENT OF SUSTAINED LOAD STRESS INDICES IN THE ASME 831 CODE Prepared by: George Antaki Becht Engineering Company Inc. r:MM“E STANDARDS TECl-INOLOGY, LLC Date oflssuance: December 22, 2011 This report was prepared as an account of work sponsored by ASME Pressure Teclmologies Codes and

2、 Standards and the ASME Standards Technology, LLC (ASME ST-LLC). Neither ASME, ASME ST-LLC, the author, nor others involved in the preparation or review of this report, nor any of their respective employees, members or persons acting on their behalf, makes any warranty, express or imp I ied, or assu

3、mes any legal liability or responsibility for the accuracy, completeness or usefulness of any information, apparatus, product or process disclosed, or represents that its use would not infringe upon privately owned rights. Reference herein to any specific commercial product, process or service by tr

4、ade name, trademark, manufacturer or otherwise does not necessarily constitute or imply its endorsement, recommendation or favoring by ASME ST -LLC or others involved in the preparation or review of this report, or any agency thereof The views and opinions of the authors, contributors and reviewers

5、of the report expressed herein do not necessarily reflect those of ASME ST -LLC or others involved in the preparation or review of this report, or any agency thereof. ASME ST-LLC does not take any position with respect to the validity of any patent rights asserted in connection with any items mentio

6、ned in tllis document, and does not undertake to insure anyone utilizing a publication against liability for infringement of any applicable Letters Patent, nor assumes any such liability. Users of a publication are expressly advised that determination of the validity of any such patent rights, and t

7、he risk of infringement of such rights, is entirely their own responsibility. Participation by federal agency representative(s) or person(s) affiliated with industry is not to be interpreted as government or industry endorsement of this publication. ASME is the registered trademark ofthe American So

8、ciety ofMechanica1 Engineers. No part of this document may be reproduced in any form, in an electronic retrieval system or otherwise, without the prior written pernlission of the publisher. ASME Standards Teclmology, LLC Three Park Avenue, New York, NY 10016-5990 ISBN No. 978-0-7918-3413-8 Copyright

9、 20 II by ASME Standards Technology, LLC All Rights Reserved Alignment of Sustained Load Stress Indices in the ASME B31 Code STP-PT-034 TABLE OF CONTENTS Fo:reword . . v Abstract . vi Background I 2 Objectives 2 3 Approach 3 4 Existing Sustained Stress Equations and Indices . 4 4.1 Existing Sustaine

10、d Stress Equations 4 4.2 Summary of Stress Equations for Sustained Loads . 4 4.2.1 ASMEB31.1 4 4.2.2 ASME B31.3 5 4.2.3 ASME B31.4 5 4.2.4 ASMEB31.8 6 4.2.5 ASME B31.7 7 4.2.6 ASME Ill Division 1 for Class 2 and 3 Piping . 7 4.3 Comparison . 7 5 Chronological Bibliography . 10 6 Sustained Stress Ind

11、ices Data 17 6.1 The Meaning of the Stress Intensification Factor i 17 6 .1.1 Experimental Fatigue Tests 17 6.1.2 Theoretical Peak Stress 17 6.1.3 Experimental and Theoretical SIF 17 6.2 The Meaning of the ASME III Stress Index B 18 7 Options and Recommendations . . . 21 7.1 Option 1 Continue as is

12、. 21 7 .1.1 Description . 21 7 .1.2 Advantages . 22 7 .1.3 Disadvantages . 22 7.2 Option 2 Consistent Equations with B Indices 22 7 .2.1 Description . 22 7.2.2 Advantages . 22 7 .2.3 Disadvantages . 22 7.3 Option 3 Adopt B31.3 Case 178 23 7.3 .1 Description . 23 7.3.2 Advantages . 23 7.3.3 Disadvant

13、ages . 24 7.4 Recommendation for Sustained Loads 24 Appendix A: ASME B31.1 , 2007 Sustained Stress Equations . 25 Appendix B: ASME B31.3, 2004 Sustained Stress Equations . 31 Appendix C: ASME B31.4, 200 Sustained Stress Equations . 37 Appendix D: ASME B31.8, Sustained Stress Equations 41 111 STP-PT-

14、034 Alignment of Sustained Load Stress Indices in the ASME B31 Code Appendix E: ASME J NC/ND-3600 Sustained Stress Equations . .49 Acknowledgments . 57 Nomenclature 58 LIST OF TABLES Table I - AJ towable Stress Factors ASME III 1977 a.S11 and I3S11 7 Table 2 -Theoretical and Experimental SIFs for an

15、 Unpressurized Pipe Bend . 17 LIST OF FIGURES Figure 1 -Example Comparison of Margins Sustained Stress I Allowable 8 Figure 2- SIF i (Lower Curve) and Stress Index B2 for 1.50 Bl6.9 Elbow 19 Figure 3 - SIF i (Lower Curve) and Stress Index B2 for Equal Leg Tee . 20 IV Alignment of Sustained Load Stre

16、ss Indices in the ASME B31 Code STP-PT-034 FOREWORD Loads on piping systems and pipelines are categorized in ASME B3 I as sustained, occasional or thermal loads. None of the ASME B3l codes explicitly define “sustained loads.“ But because they are often called out as “sustained loads such as pressure

17、 and weight,“ sustained loads are understood to mean pressure and weight. In the case of buried pipe, the soil weight on the pipe would also be a sustained load. Occasional loads are loads “such as wind or earthquake“ to which we may add pressure transients (waterhammer). Finally, thermal expansion

18、and contraction loads and loads due to thermal gradients constitute the third category of loads on piping systems. Unlike ASME VIII or ASME lll, ASME B3l does not refer to “primary“ or “secondary“ loads or stresses. Established in 1880, the American Society of Mechanical Engineers (ASME) is a profes

19、sional not for-profit organization with more than 127,000 members promoting the art, science and practice of mechanical and multidisciplinary engineering and allied sciences. ASME develops codes and standards that enhance public safety, and provides lifelong learning and technjcal exchange opportuni

20、ties benefiting the engineering and technology community. Visit www.asme.org for more information. The ASME Standards Technology, LLC (ASME ST -LLC) is a not-for-profit Limited Liability Company, with ASME as the sole member, formed in 2004 to carry out work rel.ated to newly commercialized technolo

21、gy. The ASME ST-LLC mission includes meeting the needs of industry and government by providing new standards-related products and services, which advance the application of emerging and newly commercialized science and technology, and providing the research and technology development needed to estab

22、lish and maintain the technical relevance of codes and standards. Visit www.stllc.asme.org for more information. v STP-PT-034 Alignment of Sustained Load Stress Indices in the ASME B31 Code ABSTRACT Loads on piping systems and pipelines are categorized in ASME B31 as sustained, occasional or thermal

23、 loads. None of the ASME B3l codes explicitly define “sustained loads.“ But because they are often called out as “sustained loads such as pressure and weight,“ sustained loads are tmderstood to mean pressure and weight. In the case of buried pipe, the soil weight on the pipe would also be a sustaine

24、d load. Occasional loads are loads “such as wind or earthquake“ to which we may add pressure transients (waterhammer). Finally, thermal expansion and contraction loads and loads due to thermal gradients constitute the third category of loads on piping systems. Unlike ASME VIII or ASME Ill, ASME B3 i

25、 does not refer to “primary“ or “secondary“ loads or stresses. Each of these load categories (sustained, occasional, thermal) have their own design equations. In the current codes, there are three areas among the piping and pipeline codes design equations for stresses due to sustained loads which de

26、serve attention, clarification and possibly improvement: Consistency of design equations Consistency in the use of stress indices and stress intensification factors Use offatigue-based factors to calculate stresses due to sustained loads The objective of this report is to address these areas and to

27、propose design equations for sustained loads which would be technically sound, practical, and could be applied consistently by all ASME B3 1 Code books and the ASME Section III Code. VI Alignment of Sustained Load Stress Indices in the ASME 831 Code STP-PT-034 1 BACKGROUND Loads on piping systems an

28、d pipelines are categorized in ASME B31 as sustained, occasional or thermal loads (the latter also referred to as displacement strains in ASME B3l). Interestingly, none of the ASME B31 codes explicitly define “sustained loads.“ But because they are often called out as “sustained loads such as pressu

29、re and weight,“ sustained loads are understood to mean pressure (internal or external) and weight. ln the case of buried pipe, the soil weight on the pipe would also be a sustained load. In contrast, occasional loads are loads “such as wind or earthquake“ to which we may add pressure transients (wat

30、erhammer, explosions, etc.). Finally, thermal expansion and contraction loads and loads due to thermal gradients constitute the third category of loads on piping systems. Unlike ASME VIII or ASME III, ASME B3 l does not refer to “primary“ or “secondary“ loads or stresses. There are in the current co

31、des three areas among the piping and pipeline codes design equations for stresses due to sustained loads which deserve attention, clarification and possibly improvement. These are: a. Consistency of design equations. Since the stresses caused by pressure and weight in pipes and pipelines are the sam

32、e irrespective of application (power, process, pipelines), the ASME III and ASME B3l codes should have the same design equations for sustained loads. This is not the case today. b. Consistency in the use of stress indices and stress intensification factors. While ASME III uses stress indices (Sis su

33、ch as B, C and K indices), ASME B31.1 and B31.3 use stress intensification factors (ii and i0 or i). As stated in the request for proposal for this project “since they are defined by principles of engineering mechanics, there should be no differences in stress indices from book to book.“ In fact, th

34、e SIFs and Sis relate to two different failure modes, and are different. c. Use of fatigue-based factors for sustained loads. It is questionable whether stress intensification factors “i“ developed based on cyclic fatigue tests are appropriate for the analysis of sustained loads. As stated in Rodaba

35、ugh and Moore (1984) “There does not appear to be a good reason, however, to use the stress intensification i-factors to evaluate primary loadings.“ 0.75i is only an approximation of a sustained stress index. STP-PT-034 Alignment of Sustained Load Stress Indices in the ASME B31 Code 2 OBJECTIVES The

36、 first objective of this report is to address the discrepancies listed in Section I : Consistency of design equations Consistent use of stress indices and stress intensification factors Use of fatigue-based factors to calculate stresses due to sustained loads. The second objective of this report is

37、to propose design equations for sustained loads wihich would be technically sound, practical (simple) and could be applied consistently by all ASME B31 Code books and the ASME Section III Code. 2 Alignment of Sustained Load Stress Indices in the ASME 831 Code STP-PT-034 3 APPROACH The report takes t

38、he following approach. 1. Conduct a literature search on the topic including compiling the existing sustained load stress indices of B3 1.1, B31.3, B3 1.4 and B31.8, and Section III, Subsection NC!ND. 2. Gather relevant historical data and references. 3. Obtain and reduce recently published test dat

39、a for sustained stress multipliers. 4. Recommend applicable equations for sustained stress indices and notes for use in B31 books and Section lii, Subsection NC/ND. 3 STP-PT-034 Alignment of Sustained Load Stress Indices in the ASME B31 Code 4 EXISTING SUSTAINED STRESS EQUATIONS AND INDICES 4.1 Exis

40、ting Sustained Stress Equations Existing equations for stresses due to sustained loads are reproduced in Appendices: Appendix A ASME B3 1.1 Power Piping Appendix B ASME B31.3 Process Piping Appendix C ASME B31.4 Pjpeline Transportation Systems for Liquid Hydrocarbons and Other Liquids Appendix D ASM

41、E B31.8 Gas Transmission and Distribution Piping Systems Appendix E ASME Ill Division 1 Rules for Construction of Nuclear Facility Components, Subsection NC Class 2 Components. 4.2 Summary of Stress Equations for Sustained Loads 4.2.1 ASME 831.1 4.2.1.1 P ressure Design 8 31.1 The 1955 edition of AS

42、ME B31.1 design for sustained loads included the pressure design equation in the same form as todays: t = PxD 2x (S+Pxy) The 2005 addendum of ASME B3l.l reduced the design margin against ultimate strength (increased the allowable stress S) from 4 to 3.5. 4.2.1.2 Longitudinal Stresses 8 31.1 The 1955

43、 edition did not include sustained load design equations, but, instead, required piping and equipment to “be supported in a thoroughly substantial and workmanlike manner “ This is. consistent with the practice of the 1950s, as described in the M.W. Kellog Co. manual “Design of Piping Systems,“ which

44、 stated: Other loading which may act on piping systems includes: the weight loads of the piping, including structural members, the weight of the insulation and contents; snow and ice loading; wind loading if exposed; loading due to acceleration imparted by earth tremors; special shock loading, such

45、as gun fire or moving vehicles; an unbalanced static pressure or flow effects. It is possible to include any or all of these loads in a complete solution, following the methods of Chapter 5 Flexibility Analysis by the General Analytical Method. Ordinarily, these effects are not sufficiently critical

46、 to warrant the extra engineering cost of this more precise approach. Instead they are indirectly controlled in a standardized way (e.g. support standards) or individually estimated and controlled so that the sum of all effects will approximately meet the same combined stress criterion. 4 Alignment

47、of Sustained Load Stress Indices in the ASME 8 31 Code STP-PT-034 The 1967 edition of B3 1.1 included the requirement that “The sum of longitudinal stresses due to pressure, weight and other sustained loads shall not exceed the allowable stress in the hot condition S,. Where the sum of these stresse

48、s is less than S, the difference between S, and this sum may be added to the term 0.25S, in Formula (1) SA = f (1 .25 Sc + 0.25 S1JJ for determining the allowable stress range SA. The longitudinal pressure stress s,p shall be determined by dividing the end force due to internal pressure . by the cro

49、ss-sectional area of the pipe S1P = P x cf I (D/ - d2).“ There is no formula for the other longitudinal stresses. There was no equation to calculate the longitudinal stresses. The 1977 edition of B31. 1 contains the stress equation in its current form, PD/(4 tn) + 0.75i MA/Z 1.0 sh The single stress intensification factor i, maximum of in-plane i; and out-of-plane i0 was used, and continues to be used in B31 .1, for sim