ASCE GSP 288-2017 GROUTING DRILLING AND VERIFICATION.pdf
《ASCE GSP 288-2017 GROUTING DRILLING AND VERIFICATION.pdf》由会员分享,可在线阅读,更多相关《ASCE GSP 288-2017 GROUTING DRILLING AND VERIFICATION.pdf(435页珍藏版)》请在麦多课文档分享上搜索。
1、GEOTECHNICAL SPECIAL PUBLICATION NO. 288 GROUTING 2017 GROUTING, DRILLING, AND VERIFICATION SELECTED PAPERS FROM SESSIONS OF GROUTING 2017 July 912, 2017 Honolulu, Hawaii SPONSORED BY International Conference Organization for Grouting (ICOG) Geo-Institute of the American Society of Civil Engineers E
2、DITED BY Michael J. Byle, P.E., D.GE Lawrence F. Johnsen, P.E., D.GE Donald A. Bruce, Ph.D., C.Eng., D.GE Chadi S. El Mohtar, Ph.D. Paolo Gazzarrini, P.Eng. Thomas D. Richards Jr., P.E., D.GE Published by the American Society of Civil Engineers Published by American Society of Civil Engineers 1801 A
3、lexander Bell Drive Reston, Virginia, 20191-4382 www.asce.org/publications | ascelibrary.org Any statements expressed in these materials are those of the individual authors and do not necessarily represent the views of ASCE, which takes no responsibility for any statement made herein. No reference m
4、ade in this publication to any specific method, product, process, or service constitutes or implies an endorsement, recommendation, or warranty thereof by ASCE. The materials are for general information only and do not represent a standard of ASCE, nor are they intended as a reference in purchase sp
5、ecifications, contracts, regulations, statutes, or any other legal document. ASCE makes no representation or warranty of any kind, whether express or implied, concerning the accuracy, completeness, suitability, or utility of any information, apparatus, product, or process discussed in this publicati
6、on, and assumes no liability therefor. The information contained in these materials should not be used without first securing competent advice with respect to its suitability for any general or specific application. Anyone utilizing such information assumes all liability arising from such use, inclu
7、ding but not limited to infringement of any patent or patents. ASCE and American Society of Civil EngineersRegistered in U.S. Patent and Trademark Office. Photocopies and permissions. Permission to photocopy or reproduce material from ASCE publications can be requested by sending an e-mail to permis
8、sionsasce.org or by locating a title in ASCEs Civil Engineering Database (http:/cedb.asce.org) or ASCE Library (http:/ascelibrary.org) and using the “Permissions” link. Errata: Errata, if any, can be found at https:/doi.org/10.1061/9780784480793 Copyright 2017 by the American Society of Civil Engine
9、ers. All Rights Reserved. ISBN 978-0-7844-8079-3 (PDF) Manufactured in the United States of America. Preface This is the second Geotechnical Special Publication of the proceedings of Grouting 2017, the Fifth International Conference on Grouting, Deep Mixing, and Diaphragm Walls held in Honolulu Hawa
10、ii, U.S.A. July 9-12, 2017. Grouting 2017 is the fifth in a series of international conferences that began in 1982 to advance the science and technology of grouting, and these proceedings represent a five-year update from the previous conference in 2012 New Orleans. The three GSPs of these proceedin
11、gs capture 1) advances in the technology of materials, instrumentation, control, and the basic science of grouting, deep mixing and diaphragm walls that will lead to new and deeper understanding, new applications, and directions for the future; 2) exciting new information on Grouting and Deep Mixing
12、 practices for monitoring and instrumentation technology that is becoming the new normal for these technologies throughout the world; and 3) new integration of multiple technologies for diaphragm wall construction and remediation. GSP 288 focuses on Grouting, Drilling, and Verification with papers e
13、ncompassing nearly every aspect of grouting: design and assessment, construction, verification, quality assurance and control, and innovation in laboratory and field studies. Also included are papers exploring developing techniques such as bio-based grouting and best practices for challenging condit
14、ions such as extreme temperatures. Mr. Peter Bowman assisted in handling some of the papers in these sessions and his assistance is greatly appreciated. These proceedings have been produced thanks to international support of numerous organizations and individuals, including the: ASCE, Geo-Institute
15、of ASCE, US DOT FHWA, Deep Foundations Institute, and International Conference Organization for Grouting (ICOG). This publication culminates two years of effort by the planning committee whose focus has been to continue the vision established in the initial conference chaired by Wallace Hayward Bake
16、r and to keep the proceedings of this conference as the definitive source of information on the cutting edge of grouting and related technologies. Many individuals are responsible for the content of this volume, all of whom served in the efforts to maintain the standard set by previous proceedings.
17、Papers were reviewed in accordance with ASCE GSP standards. Accordingly, each paper was subjected to technical review by two or more independent peer reviewers. Publication requires concurrence by at least two peer reviewers. The previous four conferences held in 1982, 1992, 2003, and 2012 were orga
18、nized by the Grouting Committee of the ASCE/Geo-Institute and ICOG. ICOG is an independent organization that arose from the Grouting Committee of the Geo-Institute with the purpose of promoting the continuing growth of the understanding and use of geotechnical grouting. ICOG has worked closely with
19、the Geo-Institute in the organization of this conference and preparation of these proceedings. Grouting 2017 GSP 288 iii ASCEAcknowledgments The success of The Fifth International Conference on Grouting depended on numerous individuals as well as the legacy of this series of international grouting c
20、onferences, all of which have been organized by the Geo-Institute of ASCEs Grouting Technical Committee. The first international conference in 1982 was the brainchild of Wally Baker. Thanks are due to the authors, reviewers, program committee, technical advisory committee, session chairs, moderators
21、, sponsors, exhibitors, attendees and the ASCE conference organizing committee, notably Helen Cook and Brad Keelor. Grouting 2017 Program Committee Conference Chair: Michael J. Byle, P.E., D.GE, F.ASCE; Tetra Tech, Inc. Conference Co-Chair: Lawrence F. Johnsen, P.E., D.GE, M.ASCE; GZA GeoEnvironment
22、al, Inc. Conference Co-Chair: Paolo Gazzarrini, P.Eng, M.ASCE; Sea to Sky Geotech Inc. Conference Co-Chair and Workshops Co-Chair: Donald A. Bruce, Ph.D., D.GE, M.ASCE; Geosystems L.P. Technical Program Co-Chair: Allen Cadden, P.E., D.GE, F.ASCE; Schnabel Engineering Committee Members Samson W. Band
23、imere, Aff.M.ASCE; Bandimere Grouting Consulting Services Michael J. Miluski, P.E., M.ASCE; Compaction Grouting Services, Inc. George K. Burke, P.E., D.GE, M.ASCE; Hayward Baker, Inc. Joe Harris, Aff.M.ASCE; Hayward Baker, Inc. Steve C. Maranowski, A.M.ASCE; Spartan Specialties Ltd. Daniel Bole, A.M
24、.ASCE; Hayward Baker, Inc. Thomas D. Richards, Jr., P.E., D.GE, M.ASCE; Nicholson Construction Company Justice J. Maswoswe, Ph.D., P.E., M.ASCE; FHWA Resource Center Cumaraswamy “Vipu“ Vipulanandan, Ph.D., P.E., M.ASCE; University of Houston Chadi El Mohtar, Ph.D., A.M.ASCE; University of Texas at A
- 1.请仔细阅读文档,确保文档完整性,对于不预览、不比对内容而直接下载带来的问题本站不予受理。
- 2.下载的文档,不会出现我们的网址水印。
- 3、该文档所得收入(下载+内容+预览)归上传者、原创作者;如果您是本文档原作者,请点此认领!既往收益都归您。
下载文档到电脑,查找使用更方便
10000 积分 0人已下载
下载 | 加入VIP,交流精品资源 |
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- ASCEGSP2882017GROUTINGDRILLINGANDVERIFICATIONPDF

链接地址:http://www.mydoc123.com/p-454030.html