ASD-STAN TR 4865-2018 Aerospace series Suitable cable outlet to be mated on EN 3645 connector (layout type 21R48) for the qualification of electrical contact Product standards EN 3.pdf

《ASD-STAN TR 4865-2018 Aerospace series Suitable cable outlet to be mated on EN 3645 connector (layout type 21R48) for the qualification of electrical contact Product standards EN 3.pdf》由会员分享，可在线阅读，更多相关《ASD-STAN TR 4865-2018 Aerospace series Suitable cable outlet to be mated on EN 3645 connector (layout type 21R48) for the qualification of electrical contact Product standards EN 3.pdf（5页珍藏版）》请在麦多课文档分享上搜索。

1、ASD-STAN Technical Report Rapport Technique ASD-STAN ASD-STAN Fachbericht TR 4865 Edition 1 June 2018 PUBLISHED BY THE AEROSPACE AND DEFENCE INDUSTRIES ASSOCIATION OF EUROPE - STANDARDIZATION Rue Montoyer 10 - 1000 Brussels - Tel. 32 2 775 8126 - Fax. 32 2 775 8131 - www.asd-stan.org ICS: Descriptor

2、s: ENGLISH VERSION Aerospace series Suitable cable outlet to be mated on EN 3645 connector (layout type: 21R48) for the qualification of electrical contact Product standards EN 3155-065 and EN 3155-083 Luft- und Raumfahrt Geeignetes Endgehuse fr Steckverbinder EN 3645 (Polbild 21R48) fr die Zulassun

3、g der elektrischen Kontakte EN 3155-065 und EN 3155-083 Srie arospatiale Sortie de cble adapte accoupler sur connecteur EN 3645 (type dagencement : 21R48) pour la qualification des normes de produits de contacts lectriques EN 3155-065 et EN 3155-083 This Technical Report was drawn up by the Electric

4、al Domain of ASD-STAN. The reason which led to the publication of the document as a Technical Report is explained in the foreword. Edition approved for publication 1st June 2018 Comments should be sent within six months after the date of publication to ASD-STAN Electrical Domain Copyright 2018 by AS

5、D-STAN Page 2 TR 4865:2018 (E) Page2 TR 6058:09-2016(E)Contents Page 1 Scope 4 2 Normative references 4 3 Terms and definitions . 4 4 Design descriptions 5 Page 3 TR 4865:2018 (E) Foreword The main task of ASD-STAN is to prepare EN standards. In exceptional circumstances, however, the publication of

6、 a Technical Report of one of the following types may be proposed: type 1, the subject is still under technical development requiring wider exposure; type 2, a Technical Domain has collected data of a different kind from that which is normally published as a European Standard. The Electrical Domain

7、decided to publish this document in the form of a Technical Report of type 2, as it contains only general guidelines. Page 4 TR 4865:2018 (E) Page4 TR 6058:09-2016(E)Introduction The aim of this Technical Report is to provide and describe a cable outlet to be adapted on the connector type EN 3645 (l

8、ayout type: 21R48) to guide, fit and secure the cable and sealing boot over the connector. 1 Scope This Technical Report specifies the layout and dimensions of the cable outlet to be mated on the EN 3645 connector (layout type: 21R48) for the qualification of the product standard EN 3155-065 and EN

9、3155-083. The described cable outlet (or equivalent validated by the MBR) must be used during the qualification of the product standard EN 3155-065 and EN 3155-083 until the appropriate corresponding EN 3660 product standard is published. 2 Normative references The following documents are referred t

10、o in the text in such a way that some or all of their content constitutes requirements of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 2591-100, Aerospace series Eleme

11、nts of electrical and optical connection Test methods Part 100: General EN 3155-001, Aerospace series Electrical contacts used in elements of connection Part 001: Technical specification EN 3155-065, Aerospace series Electrical contacts used in elements of connection Part 065: Contacts, electrical,

12、male, type A, crimp, class S, size 8 Product standard EN 3155-083, Aerospace series Electrical contacts used in elements of connection Part 083: Contact, electrical, female, type A, crimp, class S, size 8 Product standard EN 3645-001, Aerospace series Connectors, electrical, circular, scoop-proof, t

13、riple start threaded coupling, operating temperature 175 C or 200 C continuous Part 001: Technical specification EN 3660-001, Aerospace series Cable outlet accessories for circular and rectangular electrical and optical connectors Part 001: Technical specification 3 Terms and definitions For the pur

14、poses of this document, the terms and definitions given in EN 2591-001 apply. ISO and IEC maintain terminological databases for use in standardization at the following addresses: IEC Electropedia: available at http:/www.electropedia.org/ ISO Online browsing platform: available at http:/www.iso.org/o

15、bp Page 5 TR 4865:2018 (E) 4 Design descriptions Figure 1 provides the overall dimensions for the description and layout of cable outlet to be mated on EN 3645 (21R48). The cable outlet must be exempted of sharp edges and must prevent any damages or deformations on the cable. Key 1 Thread M31 1 6H Material Plating aluminium nickel stainless steal Figure 1 Cable outlet to fit on EN 3645 connector (21R48)