ASD-STAN TR 4654-200-2014 Aerospace series Connectors electrical EN 4644 specific products Part 200 Size 8 male quadrax contact pc tails (Edition 2).pdf
《ASD-STAN TR 4654-200-2014 Aerospace series Connectors electrical EN 4644 specific products Part 200 Size 8 male quadrax contact pc tails (Edition 2).pdf》由会员分享,可在线阅读,更多相关《ASD-STAN TR 4654-200-2014 Aerospace series Connectors electrical EN 4644 specific products Part 200 Size 8 male quadrax contact pc tails (Edition 2).pdf(10页珍藏版)》请在麦多课文档分享上搜索。
1、ASD-STAN Technical Report Rapport Technique ASD-STAN ASD-STAN Fachbericht TR 4654-200 Edition 2 September 2014 PUBLISHED BY THE AEROSPACE AND DEFENCE INDUSTRIES ASSOCIATION OF EUROPE - STANDARDIZATIONRue Montoyer 10 - 1000 Brussels - Tel. 32 2 775 8126 - Fax. 32 2 775 8131 - www.asd-stan.orgICS: Sup
2、ersedes edition 1 of August 2010 Descriptors: ENGLISH VERSION Aerospace series Connectors, electrical, EN 4644 specific products Part 200: Size 8 male quadrax contact pc tails Srie arospatiale Connecteurs lectriques, EN 4644 produits spcifiques Partie 200 : Contact quadrax picots, mle, taille 8 Luft
3、- und Raumfahrt Elektrische, Steckverbinder, EN 4644 spezielle-Produkte Teil 200: Quadrax-Stiftkontakt, Gre 8, Leiterplattenmontage Technischer Bericht This Technical Report was drawn up by the Electrical Domain of ASD-STAN. The reason which led to the publication of the document as a Technical Repo
4、rt is explained in the foreword. Edition approved for publication 1stSeptember 2014 Electrical Domain Copyright 2014 by ASD-STAN Page 2 TR 4654-200:09-2014 Contents Page Foreword 3 1 Scope 4 2 Normative references 4 3 Terms and definitions .4 4 Required characteristics .5 5 Recommended tests 6 6 Pre
5、paration of specimens .9 7 Marking .10 8 Technical specification .10 Page 3 TR 4654-200:09-2014 Foreword The main task of ASD-STAN Technical Committees is to prepare EN Standards, in exceptional circumstances however, the publication of Technical Report of one of the following types may be proposed:
6、 Type 1, the subject is still under technical development requiring wider exposure; Type 2, a Technical Committee has collected data of a different kind from that which is normally published as a European Standard. The Electrical Domain decided to publish this document in the form of a Technical Rep
7、ort of type 2 in order to facilitate the updating of this document. Page 4 TR 4654-200:09-2014 1 Scope This Technical Report is describing the pin quadrax contact with right angle PC tail that is derived from quadrax contacts defined by EN 3155-072. 2 Normative references The following documents, in
8、 whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 2591(all parts), Aerospace seri
9、es Elements of electrical and optical connection Test methods EN 3155-001, Aerospace series Electrical contacts used in elements of connection Part 001: Technical specification EN 3155-072, Aerospace series Electrical contacts used in elements of connection Part 072: Contacts, electrical, quadrax, s
10、ize 08, male, type E, crimp, class R Product standard 1)EN 4644 (all parts), Aerospace series Connector, electrical and optical, rectangular, modular, rectangular inserts, operating temperature 175 C (or 125 C) continuous 2)TR 4654-001, Aerospace series Connectors, electrical, EN 4644 specific produ
11、cts Part 001: Technical specification 3)3 Terms and definitions For the purposes of this document, the terms and definitions given in EN 4644-001 apply. 1) In preparation at the date of publication of this standard. 2) Published as ASD-STAN Prestandard at the date of publication of this standard by
12、Aerospace and Defence Industries Association of Europe-Standardization (ASD-STAN), (www.asd-stan.org). 3) Published as ASD-STAN Technical Report at the date of publication of this standard by Aerospace and Defence Industries Association of Europe-Standardization (ASD-STAN), (www.asd-stan.org). Page
13、5 TR 4654-200:09-2014 4 Required characteristics 4.1 Dimensions and recommended PC grid pattern Pin quadrax contact mating dimensions are described in EN 3155-072. See Figure 1, Table 1 and Table 2. Key 1 A, B, C and D dimensions are specified in EN 4644-001 NOTE J tinned area. Figure 1 Page 6 TR 46
14、54-200:09-2014 Table 1 L E F K PC tail length mm mm mm N1 25,25 26,25 12,50 13,50 22,15 22,45 Table 2 G H min. L min. M N J Tinned area min. Gold class mm 0,68 0,62 0,75 1 0,72 0,60 0,55 0,45 NA Tin class mm 0,80 max. 1,06 1,28 0,83 max. 0,83 max. 4,65 4.2 Contact termination There are several possi
- 1.请仔细阅读文档,确保文档完整性,对于不预览、不比对内容而直接下载带来的问题本站不予受理。
- 2.下载的文档,不会出现我们的网址水印。
- 3、该文档所得收入(下载+内容+预览)归上传者、原创作者;如果您是本文档原作者,请点此认领!既往收益都归您。
下载文档到电脑,查找使用更方便
10000 积分 0人已下载
下载 | 加入VIP,交流精品资源 |
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- ASDSTANTR46542002014AEROSPACESERIESCONNECTORSELECTRICALEN4644SPECIFICPRODUCTSPART200SIZE8MALEQUADRAXCONTACTPCTAILSEDITION2PDF
链接地址:http://www.mydoc123.com/p-453840.html