ASD-STAN PREN 4644-022-2014 Aerospace series Connector electrical and optical rectangular modular rectangular inserts operating temperature 175 (or 125 continuous Part 022 Plug siz.pdf

《ASD-STAN PREN 4644-022-2014 Aerospace series Connector electrical and optical rectangular modular rectangular inserts operating temperature 175 (or 125 continuous Part 022 Plug siz.pdf》由会员分享，可在线阅读，更多相关《ASD-STAN PREN 4644-022-2014 Aerospace series Connector electrical and optical rectangular modular rectangular inserts operating temperature 175 (or 125 continuous Part 022 Plug siz.pdf（7页珍藏版）》请在麦多课文档分享上搜索。

1、ASD-STAN STANDARD NORME ASD-STAN ASD-STAN NORM prEN 4644-022 Edition P 1 July 2014 PUBLISHED BY THE AEROSPACE AND DEFENCE INDUSTRIES ASSOCIATION OF EUROPE - STANDARDIZATIONRue Montoyer 10 - 1000 Brussels - Tel. 32 2 775 8126 - Fax. 32 2 775 8131 - www.asd-stan.orgICS: 49.060; 49.090 Descriptors: ENG

2、LISH VERSION Aerospace series Connector, electrical and optical, rectangular, modular, rectangular inserts, operating temperature 175 C (or 125 C) continuous Part 022: Plug, size 2, with mounting holes, class A, C and E Product standard Srie arospatiale Connecteur, lectrique et optique, rectangulair

3、e, modulaire, inserts rectangulaires, temprature de fonctionnement 175 C (ou 125 C) continu Partie 022 : Fiche, taille 2, avec trous de fixation, classes A, C et E Norme de produit Luft- und Raumfahrt Elektrische und optische Rechtecksteckverbinder, modular, rechteckige Kontakteinstze, Dauerbetriebs

4、temperatur 175 C (oder 125 C) konstant Teil 022: Freier Steckverbinder, Gre 2, mit Montagebohrungen, Klassen A, C und E Produktnorm This “Aerospace Series“ Prestandard has been drawn up under the responsibility of ASD-STAN (The AeroSpace and Defence Industries Association of Europe - Standardization

5、). It is published for the needs of the European Aerospace Industry. It has been technically approved by the experts of the concerned Domain following member comments. Subsequent to the publication of this Prestandard, the technical content shall not be changed to an extent that interchangeability i

6、s affected, physically or functionally, without re-identification of the standard. After examination and review by users and formal agreement of ASD-STAN, it will be submitted as a draft European Standard (prEN) to CEN (European Committee for Standardization) for formal vote and transformation to fu

7、ll European Standard (EN). The CEN national members have then to implement the EN at national level by giving the EN the status of a national standard and by withdrawing any national standards conflicting with the EN. Edition approved for publication 1stJuly 2014 Comments should be sent within six m

8、onths after the date of publication to ASD-STAN Electrical Domain Copyright 2014 by ASD-STAN prEN 4644-022:2014 (E) 2 Contents Page Foreword 2 1 Scope 3 2 Normative references 3 3 Terms and definitions . 3 4 Required characteristics . 4 5 Designation 7 Foreword This standard was reviewed by the Doma

9、in Technical Coordinator of ASD-STANs Electrical Domain. After inquiries and votes carried out in accordance with the rules of ASD-STAN defined in ASD-STANs General Process Manual, this standard has received approval for Publication. prEN 4644-022:2014 (E) 3 1 Scope This standard specifies the size

10、2 plug for disconnect applications used in the family of modular rectangular electrical and optical connector with rectangular inserts. The receptacle corresponding to this plug is defined in EN 4644-024 or EN 4644-025 or EN 4644-026. 2 Normative references The following documents, in whole or in pa

11、rt, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 4644-001, Aerospace series Connector, electric

12、al and optical, rectangular, modular, rectangular inserts operating temperature 175 C (or 125 C) continuous Part 001: Technical specification EN 4644-002, Aerospace series Connector, electrical and optical, rectangular, modular, rectangular inserts operating temperature 175 C (or 125 C) continuous P

13、art 002: Specification of performance and contact arrangements EN 4644-024, Aerospace series Connector, electrical and optical, rectangular, modular, rectangular inserts operating temperature 175 C (or 125 C) continuous Part 024: Receptacle, size 2, class A, C and E Product standard 1)EN 4644-025, A

14、erospace series Connector, electrical and optical, rectangular, modular, rectangular inserts operating temperature 175 C (or 125 C) continuous Part 025: Receptacle, size 2, with flange, class A, C and E Product standard 1)EN 4644-026, Aerospace series Connector, electrical and optical, rectangular,

15、modular, rectangular inserts operating temperature 175 C (or 125 C) continuous Part 026: Receptacle, size 2, with ground block, class B and F Product standard 1)3 Terms and definitions For the purposes of this standard, the terms and definitions given in EN 4644-001 apply. 1) Published as ASD-STAN P

16、restandard at the date of publication of this standard. http:/www.asd-stan.org/ prEN 4644-022:2014 (E) 4 4 Required characteristics 4.1 Dimensions and recommended panel cut-out See Figure 1 to Figure 3. Key 1 See EN 4644-001. 2 Axis of 19,00 3 Two 3,09 min. (3,20 max.) clear holes or self-locking 6-

17、32 UNC threads or self-locking 4-40 UNC threads NOTE Ap, Bp, Cp axis, see EN 4644-001. Figure 1 prEN 4644-022:2014 (E) 5 NOTE Ap axis, see EN 4644-001. Figure 2 prEN 4644-022:2014 (E) 6 Key 1 Two screws head maximum diameter: 6 Figure 3 Panel cut-out 4.2 Mass 40 g max. prEN 4644-022:2014 (E) 7 5 Des

18、ignation EXAMPLE Description block ELECTRICAL CONNECTOR, SIZE 2 PLUG Identity block EN 4644-022ADX Number of this standard Shell class (see EN 4644-002) Housing type: (see Figures 1 and 2) D: with 2 3,09 (3,20 max.) clear holes L: with 2 4-40 UNC threaded holes F: with 2 6-32 UNC threaded holes Polarization code (see EN 4644-002)