ASD-STAN PREN 3645-008-2014 Aerospace series Connectors electrical circular scoop-proof triple start threaded coupling operating temperature 175 or 200 continuous Part 008 Non rele.pdf

《ASD-STAN PREN 3645-008-2014 Aerospace series Connectors electrical circular scoop-proof triple start threaded coupling operating temperature 175 or 200 continuous Part 008 Non rele.pdf》由会员分享，可在线阅读，更多相关《ASD-STAN PREN 3645-008-2014 Aerospace series Connectors electrical circular scoop-proof triple start threaded coupling operating temperature 175 or 200 continuous Part 008 Non rele.pdf（7页珍藏版）》请在麦多课文档分享上搜索。

1、ASD-STAN STANDARD NORME ASD-STAN ASD-STAN NORM prEN 3645-008 Edition P 2 March 2014 PUBLISHED BY THE AEROSPACE AND DEFENCE INDUSTRIES ASSOCIATION OF EUROPE - STANDARDIZATION Rue Montoyer 10 - 1000 Brussels - Tel. 32 2 775 8126 - Fax. 32 2 775 8131 - www.asd-stan.org ICS: 49.060 Supersedes edition P

2、1 of November 2005 and will supersede EN 3645-008:2007 Descriptors: ENGLISH VERSION Aerospace series Connectors, electrical, circular, scoop-proof, triple start threaded coupling, operating temperature 175 C or 200 C continuous Part 008: Non release plug with grounding ring Product standard Srie aro

3、spatiale Connecteurs lectriques circulaires contacts protgs, accouplement par filetage pas rapide trois filets, tempratures dutilisation 175 C ou 200 C continu Partie 008 : Fiche non largable avec bague de blindage Norme de produit Luft- und Raumfahrt Elektrische Rundsteckverbinder, kontaktgeschtzt,

4、 dreigngige Gewinde Schnellkupplung, Dauerbetriebstemperaturen 175 C oder 200 C konstant Teil 008: Selbstsichernder freier Steckverbinder mit Massering Produktnorm This “Aerospace Series“ Prestandard has been drawn up under the responsibility of ASD-STAN (The AeroSpace and Defence Industries Associa

5、tion of Europe - Standardization). It is published for the needs of the European Aerospace Industry. It has been technically approved by the experts of the concerned Domain following member comments. Subsequent to the publication of this Prestandard, the technical content shall not be changed to an

6、extent that interchangeability is affected, physically or functionally, without re-identification of the standard. After examination and review by users and formal agreement of ASD-STAN, it will be submitted as a draft European Standard (prEN) to CEN (European Committee for Standardization) for form

7、al vote and transformation to full European Standard (EN). The CEN national members have then to implement the EN at national level by giving the EN the status of a national standard and by withdrawing any national standards conflicting with the EN. Edition approved for publication 1st March 2014 Co

8、mments should be sent within six months after the date of publication to ASD-STAN Electrical Domain Copyright 2014 by ASD-STAN prEN 3645-008:2014 (E) 2 Contents Page Foreword 2 1 Scope 3 2 Normative references 3 3 Terms and definitions . 4 4 Required characteristics . 4 4.1 Dimensions, mass . 4 4.2

9、Materials and surface treatment 5 4.3 Electrical, mechanical and climatic characteristics . 5 5 Designation 6 6 Marking . 7 7 Technical specification . 7 Foreword This standard was reviewed by the Domain Technical Coordinator of ASD-STANs Electrical Domain. After inquiries and votes carried out in a

10、ccordance with the rules of ASD-STAN defined in ASD-STANs General Process Manual, this standard has received approval for Publication. prEN 3645-008:2014 (E) 3 1 Scope This standard specifies the characteristics of plugs with grounding rings in the family of circular, electrical connectors, with tri

11、ple start threaded coupling. It applies to models in Table 3. For contacts, filler plugs and rear accessories associated with this plug, see EN 3645-002. For contacts, sealing plugs and cable outlet accessories associated with this plug see EN 3645-002. For receptacles and protective covers, see EN

12、3645-003, EN 3645-004, EN 3645-005, EN 3645-007, EN 3645-009 and EN 3645-010 respectively. These connector are derived from and interchangeable with models W, F, J, M and K in specification MIL-DTL-38999/26. 2 Normative references The following referenced documents are indispensable for the applicat

13、ion of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 3645-001, Aerospace series Connectors electrical, circular, scoop-proof, triple start threaded coupling, operating

14、temperature 175 C or 200 C continuous Part 001: Technical specification EN 3645-002, Aerospace series Connectors electrical, circular, scoop-proof, triple start threaded coupling, operating temperature 175 C or 200 C continuous Part 002: Specification of performance and contact arrangements EN 3645-

15、003, Aerospace series Connectors electrical, circular, scoop-proof, triple start threaded coupling, operating temperature 175 C or 200 C continuous Part 003: Wall-mount receptacle Product standard EN 3645-004, Aerospace series Connectors electrical, circular, scoop-proof, triple start threaded coupl

16、ing, operating temperature 175 C or 200 C continuous Part 004: Receptacle, hermetic, square flange mounting Product standard EN 3645-005, Aerospace series Connectors electrical, circular, scoop-proof, triple start threaded coupling, operating temperature 175 C or 200 C continuous Part 005: Receptacl

17、e, hermetic, rounf flange, brasage mounting Product standard EN 3645-007, Aerospace series Connectors electrical, circular, scoop-proof, triple start threaded coupling, operating temperature 175 C or 200 C continuous Part 007: Protective cover for plug Product standard EN 3645-009, Aerospace series

18、Connectors electrical, circular, scoop-proof, triple start threaded coupling, operating temperature 175 C or 200 C continuous Part 009: Receptacle, round flange, jam nut mounting Product standard EN 3645-010, Aerospace series Connectors electrical, circular, scoop-proof, triple start threaded coupli

19、ng, operating temperature 175 C or 200 C continuous Part 010: Receptacle, hermetic, round flange, jam nut mounting Product standard MIL-DTL-38999/26, Connectors, electrical, plug, circular, straight, removable crimp contacts, series III, metric 1) 1) Published by: DoD National (US) Mil. Department o

20、f Defense http:/www.defenselink.mil/ prEN 3645-008:2014 (E) 4 3 Terms and definitions For the purposes of this document, the terms and definitions given in EN 3645-001 apply. 4 Required characteristics 4.1 Dimensions, mass See Figure 1, Figure 2 and Table 1. Dimensions and tolerances are in millimet

21、res. Key 1 Blue strip 2 H number of flats Figure 1 Plug prEN 3645-008:2014 (E) 5 Key 1 Blue strip 2 J number of slots Figure 2 Plug Optional form for Models J and M Table 1 Plug Dimensions Shell size B1 B2 H J K S Mass without contacts 0,20 0 max. max. max. g max. Models W, F, Z Model K Models J, M

22、09 18,40 20,60 4 12 19,00 21,80 15 32 9 11 21,10 23,60 14 21,90 25,00 20 41 15 13 25,40 28,20 16 26,10 29,40 27 57 21 15 28,70 31,30 18 29,30 32,50 34 69 25 17 32,20 34,50 20 32,80 35,70 37 72 29 19 34,90 37,30 8 22 35,50 38,50 48 94 38 21 38,10 40,50 24 38,70 41,70 55 105 42 23 41,10 43,70 26 41,70

23、 44,90 67 117 51 25 44,30 46,80 28 44,90 48,00 71 140 57 4.2 Materials and surface treatment See Table 2. 4.3 Electrical, mechanical and climatic characteristics See EN 3645-002. prEN 3645-008:2014 (E) 6 5 Designation EXAMPLE Description block ELECTRICAL CONNECTOR Identity block EN3645-F6GN16AA Numb

24、er of the basic standard Model (see Table 2) Shell code for plug Shell size code (see Table 3) Letter indicating if: N: no grounded cavities G: grounded cavities K: no grounded cavities - specific fluid immersion (Fuel resistance, see EN 3645-001) H: grounded cavities - specific fluid immersion (Fue

25、l resistance, see EN 3645-001) Q: quadrax cavities, grounded L: quadrax cavities, no grounded R: reinforced insert for power contact size 8 Contact arrangement (see EN 3645-002) Contact code (see Table 4) Polarization: N, A, B, C, D, E NOTE If necessary, the code I9005 shall be placed between the de

26、scription block and the identity block. Table 2 Model coding Models Description W Sealed plugs, with shell in cadmium-plated aluminium alloy, olive green Salt spray resistance 500 h Plug with shielding ring Crimped contacts Maximum operating temperature 175 C continuous J Sealed receptacles and plug

27、s, with shell in cadmium-plated plastic composite, olive green Salt spray resistance 2 000 h Plug with shielding ring Crimped contacts 1 500 operations Maximum operating temperature 175 C continuous K Sealed receptacles, with shell in passivated stainless steel Salt spray resistance 500 h Plug with

28、shielding ring Fire resistant Crimped contacts Maximum operating temperature 200 C continuous F Sealed plugs, with shell in nickel-plated aluminium alloy Crimped contacts Plug with shielding ring Maximum operating temperature 200 C continuous M Sealed plugs, with shell in nickel-plated plastic compo

29、site Salt spray resistance 2 000 h Plug with shielding ring Crimped contacts 1 500 operations Maximum operating temperature 200 C continuous Z Sealed plugs, zinc-nickel plated aluminium alloy, non-reflective black Salt spray resistance 500h Plug with grounding spring Crimped contacts Maximum operati

30、ng temperature 175 C continuous prEN 3645-008:2014 (E) 7 Table 3 Shell size code Shell size Code 09 A 11 B 13 C 15 D 17 E 19 F 21 G 23 H 25 J Table 4 Contact code Contacts Product marking Order coding Supplied without contacts Supplied with contacts EN3155-xxxx2222 EN3155-xxxx2020 EN3155-xxxx1616 EN3155-xxxx1212 EN3155-xxxx1010 Male M A M Female F B F 6 Marking According to EN 3645-001. 7 Technical specification According to EN 3645-001.