ARP 14799-1-2008 Comparison of worldwide escalator and moving walk safety standards Part 1 Rule by rule comparison《全球范围电梯和自动走道安全标准对比 第1部分 规则对比原则》.pdf

《ARP 14799-1-2008 Comparison of worldwide escalator and moving walk safety standards Part 1 Rule by rule comparison《全球范围电梯和自动走道安全标准对比 第1部分 规则对比原则》.pdf》由会员分享，可在线阅读，更多相关《ARP 14799-1-2008 Comparison of worldwide escalator and moving walk safety standards Part 1 Rule by rule comparison《全球范围电梯和自动走道安全标准对比 第1部分 规则对比原则》.pdf（235页珍藏版）》请在麦多课文档分享上搜索。

1、 Collection of SANS standards in electronic format (PDF) 1. Copyright This standard is available to staff members of companies that have subscribed to the complete collection of SANS standards in accordance with a formal copyright agreement. This document may reside on a CENTRAL FILE SERVER or INTRA

2、NET SYSTEM only. Unless specific permission has been granted, this document MAY NOT be sent or given to staff members from other companies or organizations. Doing so would constitute a VIOLATION of SABS copyright rules. 2. Indemnity The South African Bureau of Standards accepts no liability for any

3、damage whatsoever than may result from the use of this material or the information contain therein, irrespective of the cause and quantum thereof. ISBN 978-0-626-21025-0 ARP 14799-1:2008 Edition 1 ISO/TR 14799-1:2005 Edition 1STANDARDS SOUTH AFRICA Recommended practice Comparison of worldwide escala

4、tor and moving walk safety standards Part 1: Rule by rule comparison This recommended practice is the identical implementation of ISO/TR 14799-1:2005 and is adopted with the permission of the International Organization for Standardization. This document does not have the status of a South African Na

5、tional Standard. Published by Standards South Africa 1 dr lategan road groenkloof private bag x191 pretoria 0001 tel: 012 428 7911 fax: 012 344 1568 international code +27 12 www.stansa.co.za Standards South Africa This standard may only be used and printed by approved subscription and freemailing c

6、lients of the SABS.ARP 14799-1:2008 Edition 1 ISO/TR 14799-1:2005 Edition 1 Table of changes Change No. Date Scope National foreword This recommended practice was approved by National Committee StanSA TC 5120.50, Lifts, escalators and passenger conveyors, in accordance with procedures of Standards S

7、outh Africa, in compliance with annex 3 of the WTO/TBT agreement. This document was published in March 2008. This standard may only be used and printed by approved subscription and freemailing clients of the SABS. Reference number ISO/TR 14799-1:2005(E) ISO 2005TECHNICAL REPORT ISO/TR 14799-1 First

8、edition 2005-08-15 Comparison of worldwide escalator and moving walk safety standards Part 1: Rule by rule comparison Comparaison des normes mondiales de scurit des escaliers mcaniques et trottoirs roulants Partie 1: Comparaison paragraphe par paragraphe ARP 14799-1:2008This standard may only be use

9、d and printed by approved subscription and freemailing clients of the SABS.ISO/TR 14799-1:2005(E) PDF disclaimer This PDF file may contain embedded typefaces. In accordance with Adobes licensing policy, this file may be printed or viewed but shall not be edited unless the typefaces which are embedde

10、d are licensed to and installed on the computer performing the editing. In downloading this file, parties accept therein the responsibility of not infringing Adobes licensing policy. The ISO Central Secretariat accepts no liability in this area. Adobe is a trademark of Adobe Systems Incorporated. De

11、tails of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In the unlikely event that a problem

12、 relating to it is found, please inform the Central Secretariat at the address given below. ISO 2005 All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm,

13、 without permission in writing from either ISO at the address below or ISOs member body in the country of the requester. ISO copyright office Case postale 56 CH-1211 Geneva 20 Tel. + 41 22 749 01 11 Fax + 41 22 749 09 47 E-mail copyrightiso.org Web www.iso.org Published in Switzerland ii ISO 2005 Al

14、l rights reservedARP 14799-1:2008This standard may only be used and printed by approved subscription and freemailing clients of the SABS.ISO/TR 14799-1:2005(E) ISO 2005 All rights reserved iiiContents Page Foreword .iv Introduction v 1 Scope1 2 Rule by rule comparison.1 Annex C (informative) Referen

15、ces in the compared codes 222 Annex D (informative) Addresses of standardization bodies occupied with the compared codes 226 Annex B (informative) Tables mentioned in the column for Japanese codes 220 Annex A (informative) Figures of EN 115. 217 ARP 14799-1:2008This standard may only be used and pri

16、nted by approved subscription and freemailing clients of the SABS.ISO/TR 14799-1:2005(E) iv ISO 2005 All rights reservedForeword ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International St

17、andards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also

18、 take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization. International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2. The main task of technical committee

19、s is to prepare International Standards. Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote. In exceptional circumstances, wh

20、en a technical committee has collected data of a different kind from that which is normally published as an International Standard (“state of the art”, for example), it may decide by a simple majority vote of its participating members to publish a Technical Report. A Technical Report is entirely inf

21、ormative in nature and does not have to be reviewed until the data it provides are considered to be no longer valid or useful. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any o

22、r all such patent rights. ISO/TR 14799-1 was prepared by Technical Committee ISO/TC 178, Lifts, escalators and moving walks. ISO/TR 14799 consists of the following parts, under the general title Comparison of worldwide escalator and moving walk safety standards: Part 1: Rule by rule comparison Part

23、2: Abbreviated comparison and comments ARP 14799-1:2008This standard may only be used and printed by approved subscription and freemailing clients of the SABS.ISO/TR 14799-1:2005(E) ISO 2005 All rights reserved vIntroduction At the 1995 Plenary Meeting of ISO/TC 178, the work on a comparison of worl

24、d-wide standards which includes the American, Australian, European, Russian, and Japanese escalator and moving walk safety code was passed to ISO/TC 178 WG 5 (Resolution Singapore 1995/114). In October 1995, Working Group 5 was officially formed to carry out the task of preparing a cross reference b

25、etween the relevant sections of these standards and to analyse the differences on selected subjects. The goal at that time was to prepare a technical report which would provide reference information to assist national committees when reviewing and revising individual standards which may initiate a g

26、radual convergence of the technical requirements. In 1996 the study was expanded to include the Korean safety standard. The content of this report is based on the information provided by the WG 5 members acting in personal capacity. This Technical Report is intended to aid standards writers in devel

27、oping their safety requirements, and to help standards users understand the basis for the requirements as they are applied throughout the world. This Technical Report is not intended to replace existing safety standards which may have been updated. Conclusions are arrived at in some cases, but only

28、where there is unanimity amongst the various experts. In other cases, the reasons for the divergent views are expressed. This Technical Report must be read in conjunction with the various safety standards. Unless approved by the relevant standard writing organisations the information contained in th

29、is report does not necessarily represent the opinions of these standards writing organizations (see bibliography for references). The Technical Report was done with the European Standard EN 115: 1995 and its amendment A1: 1998 as a reference document shown as the only one in its normal sequence. All

30、 other codes are not in their normal sequence and logical order. They are structured differently to EN 115. The resultant incorrectly leaves the impression of incompleteness of these standards. These standards in their original structure inclusive of their references to other standards and requireme

31、nts are however complete. ARP 14799-1:2008This standard may only be used and printed by approved subscription and freemailing clients of the SABS.ARP 14799-1:2008This standard may only be used and printed by approved subscription and freemailing clients of the SABS.TECHNICAL REPORT ISO/TR 14799-1:20

32、05(E) ISO 2005 All rights reserved 1Comparison of worldwide escalator and moving walk safety standards Part 1: Rule by rule comparison 1 Scope This Technical Report consists of a comparison of the requirements of selected topics as covered by the following world-wide safety standards (excluding loca

33、l deviations): a) Europe (CEN) EN 115; Safety rules for the construction and installation of escalators and passenger conveyors (Edition January 1995 and amendment A1: 1998); b) USA ASME A 17.1-1996; Safety Code for Elevators and Escalators NOTE The requirements for Canada (B 44) are generally the s

34、ame as for the USA. Any differences are stated in the text. c) Australia AS 1735 parts 5 and 6 for escalators and moving walks (Edition 1996); d) Japan Safety requirements mainly comprised of Building Standard Law Enforcement Order (BSLJ-EO), Notifications of Ministry of Construction (MOC-N, No. 111

35、0-1981) and draft of Japan Elevator Association Standard (JEAS); e) Russia PUBEE 10-77-94, Regulations for the installation and safe use of escalators (Edition 1995); f) Korea The Elevator Inspection Standards, KATS 2001-414 Edition according to the Korea Elevator Law 4482, both cover the safety req

36、uirements on the escalator and moving walk. It should be noted that in addition to the above listed standards and other regulations, escalators and moving walks may be required to conform to the requirements of other standards as appropriate. Where ISO/TC 178/WG 5 was aware of these standards they a

37、re mentioned in the bibliography. 2 Rule by rule comparison General This comparison is between EN 115 and the rules in A 17.1, AS 1735, PUBEE (Russia), Japanese and Korean Code. There are other standards, see listed in Scope, in the countries concerned that have requirements not shown in the escalat

38、or/moving walk standards compared, but address some of the same requirements as EN 115. The principal dimensions (e.g. L 1 , b 8 , h 6etc.) of EN 115 can be seen in the figures shown in Annex A. EN 115 clause numbers in brackets serve only as a reference point. They do not exist in the published EN

39、115. Where the Australian Standard requirements are given in italics, they only apply to moving walks. ARP 14799-1:2008This standard may only be used and printed by approved subscription and freemailing clients of the SABS.ISO/TR 14799-1:2005(E) 2 ISO 2005 All rights reserved(Blank page) ARP 14799-1

40、:2008This standard may only be used and printed by approved subscription and freemailing clients of the SABS.ISO/TR 14799-1:2005(E) ISO 2005 All rights reserved 3(Australia) Japanese Codes 0 Introduction The purpose of this standard is to define safety rules for escalators and passenger conveyors in

41、 order to safeguard people and objects against risks of accidents during operation, maintenance and inspection work. GENERAL This Code is one of the numerous codes and standards developed and published by The American Society of Mechanical Engineers (ASME) under the general auspices of the American

42、National Standards Institute, Inc. ANSI). The Code is intended to serve as the basis for state, municipal, and other jurisdictional authorities in drafting regulations governing t he installation, testing, inspection, maintenance, alteration, and repair of elevators, dumbwaiters, escalators, moving

43、walks, material lifts with automatic transfer devices, wheelchair lifts, and stairway chairlifts. It is also intended as a standard refe rence of safety requirements for the guidance of architects, engineers, insurance companies, manufacturers, and contractors, and as a standard of safety practices

44、for owners and management of structures where equipment covered in the Scope of the Code is used. Safety codes and standards are intended to enhance public health and safety. Revisions result from committee consideration of factors such as technological advances, new data, and changing environmental

45、 and industry needs. Revisions do not imply that previous editions were inadequate. It is recommended that, prior to The objective of this Standard is to provide requirements for electric escalators (moving walks) that carry passengers. The objective of this revision is to accommodate recent changes

46、 in engineering practices and advances in technology. 1. GENERAL 1.1 The PUBEE establishes requirements for the installation, design, manufacture, assembly, modernization or refurbishment, and use of escalators. Generic law Occupational Safety and Health Act, its sublevel regulations or administrati

47、ve order (Notification by minister) herein after KOSHA. Specific law Laws relating to manufacture and management of elevator and it sublevel regulation or administrative order(Notice) herein after KEL 4482. Other related laws to elevators and escalators: - Building construction law; - Housing constr

48、uction promotion act (1,2); - Construction business act; - Electric construction act. Korean Code EN 115:1995 (Europe) ASME A 17.1-1996 (USA)(Russia) P UBEE 10-77-94:1995 AS 1735 parts 1, 5 the use of materials with asbestos is not permitted; BSLJ-EO (Fundamental Principles of Structural Design) Art

49、icle 36-2 In planning the structural design of buildings, columns, beams, floors, walls, etc. shall be arranged effectively according to use, scale, and structural features of the building concerned, as well as the conditions of the land concerned, so that the said building as a whole will be of structure safe from dead load, live load, snow load, wind pressure, ground pressure and water pressure as well as earthquakes or other vibration or shock acting upon the said building. 2. Principal parts necessary for structural st