ARMY UFGS-27 51 23 10-2011 INTERCOMMUNICATION SYSTEM.pdf

《ARMY UFGS-27 51 23 10-2011 INTERCOMMUNICATION SYSTEM.pdf》由会员分享，可在线阅读，更多相关《ARMY UFGS-27 51 23 10-2011 INTERCOMMUNICATION SYSTEM.pdf（22页珍藏版）》请在麦多课文档分享上搜索。

1、*USACE / NAVFAC / AFCESA / NASA UFGS-27 51 23.10 (May 2011)-Preparing Activity: USACE Superseding Without RevisionUFGS-33 82 01 (August 2009)UNIFIED FACILITIES GUIDE SPECIFICATIONSReferences are in agreement with UMRL dated October 2011*SECTION TABLE OF CONTENTSDIVISION 27 - COMMUNICATIONSSECTION 27

2、 51 23.10INTERCOMMUNICATION SYSTEM05/11PART 1 GENERAL1.1 REFERENCES1.2 SYSTEM DESCRIPTION1.2.1 Sound Reproduction1.2.2 System Operation and Service Features1.2.2.1 Control and Power Requirements1.2.2.2 Call-In Indication1.2.2.3 Identification Plates1.2.2.4 Speaker/Handset Stations1.2.2.5 Privacy Swi

3、tch1.3 SUBMITTALS1.4 DELIVERY, STORAGE, AND HANDLING1.5 EXTRA MATERIALSPART 2 PRODUCTS2.1 MATERIALS AND EQUIPMENT2.1.1 Standard Products2.1.2 Identical Items2.1.3 Nameplates2.2 TYPE 1 SYSTEM2.2.1 Master Station2.2.2 Intercommunication Amplifier2.2.3 Remote Station2.2.4 All-Call Amplifier2.2.5 Power

4、Line Surge Protection2.2.6 Signal Surge Protection2.3 TYPE 2 SYSTEM2.3.1 Master Station2.3.2 Remote Station2.3.3 Amplifier2.3.3.1 Intercommunication Amplifier2.3.3.2 All-Call Amplifier2.3.3.3 Paging Amplifier2.3.3.4 Power Line Surge ProtectionSECTION 27 51 23.10 Page 1Provided by IHSNot for ResaleNo

5、 reproduction or networking permitted without license from IHS-,-,-2.3.3.5 Signal Surge Protection2.3.4 Horn-Type Loudspeakers2.3.5 Cone-Type Loud speakers2.4 TYPE 3 SYSTEM2.4.1 Master Station2.4.2 Remote Station2.4.3 Amplifier2.4.3.1 Intercommunication Amplifier2.4.3.2 All-Call Amplifier2.4.3.3 Pag

6、ing Amplifier2.4.3.4 Power Line Surge Protection2.4.3.5 Signal Surge Protection2.4.4 Horn-Type Loudspeakers2.4.5 Cone-Type Loud speakers2.5 SPEAKER ENCLOSURES2.6 TERMINALS2.7 COMMUNICATIONS WIRING2.8 SURGE PROTECTIONPART 3 EXECUTION3.1 EXAMINATION3.2 INSTALLATION3.2.1 Signal and Control Circuits Wir

7、ing3.2.2 Conduit, Cable Tray and Tubing Systems3.3 GROUNDING3.4 TRAINING3.5 ACCEPTANCE TESTS- End of Section Table of Contents -SECTION 27 51 23.10 Page 2Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-*USACE / NAVFAC / AFCESA / NASA UFGS-27 51 23.10

8、 (May 2011)-Preparing Activity: USACE Superseding Without RevisionUFGS-33 82 01 (August 2009)UNIFIED FACILITIES GUIDE SPECIFICATIONSReferences are in agreement with UMRL dated October 2011*SECTION 27 51 23.10INTERCOMMUNICATION SYSTEM05/11*NOTE: This guide specification covers the requirements for el

9、ectronic intercommunication systems, including master and remote stations of the wired and wireless types.Adhere to UFC 1-300-02 Unified Facilities Guide Specifications (UFGS) Format Standard when editing this guide specification or preparing new project specification sections. Edit this guide speci

10、fication for project specific requirements by adding, deleting, or revising text. For bracketed items, choose applicable items(s) or insert appropriate information.Remove information and requirements not required in respective project, whether or not brackets are present.Comments, suggestions and re

11、commended changes for this guide specification are welcome and should be submitted as a Criteria Change Request (CCR).*PART 1 GENERAL*NOTE: This guide specification covers intercommunication systems and lists desirable features of electronic systems; however, not all manufacturers produce products w

12、ith all the listed features. Manufacturers catalogs may be consulted as to the features wanted and those features specified. Additional features, requirements, etc., may be made to this specification. Where intercommunication systems are to be used with other communication devices, consideration mus

13、t be given to the electromagnetic compatibility of the intercommunication system in accordance with AR 5-12. This intercommunication system guide SECTION 27 51 23.10 Page 3Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-specification does not include

14、 all features and design parameters which are available. However, specifying exact equipment configuration or design parameters which are unnecessarily restrictive to competition should be avoided.*1.1 REFERENCES*NOTE: This paragraph is used to list the publications cited in the text of the guide sp

15、ecification. The publications are referred to in the text by basic designation only and listed in this paragraph by organization, designation, date, and title.Use the Reference Wizards Check Reference feature when you add a RID outside of the Sections Reference Article to automatically place the ref

16、erence in the Reference Article. Also use the Reference Wizards Check Reference feature to update the issue dates.References not used in the text will automatically be deleted from this section of the project specification when you choose to reconcile references in the publish print process.*The pub

17、lications listed below form a part of this specification to the extent referenced. The publications are referred to within the text by the basic designation only.ELECTRONIC COMPONENTS ASSOCIATION (ECA)ECA EIA/ECA 310 (2005) Cabinets, Racks, Panels, and Associated EquipmentINSTITUTE OF ELECTRICAL AND

18、 ELECTRONICS ENGINEERS (IEEE)IEEE C62.41.1 (2002; R 2008) Guide on the Surges Environment in Low-Voltage (1000 V and Less) AC Power CircuitsIEEE C62.41.2 (2002) Recommended Practice on Characterization of Surges in Low-Voltage (1000 V and Less) AC Power CircuitsNATIONAL FIRE PROTECTION ASSOCIATION (

19、NFPA)NFPA 70 (2011; TIA 11-1; Errata 2011) National Electrical CodeUNDERWRITERS LABORATORIES (UL)UL 1449 (2006; Reprint Feb 2011) Surge Protective DevicesSECTION 27 51 23.10 Page 4Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-UL 50 (2007) Enclosure

20、s for Electrical Equipment, Non-environmental Considerations1.2 SYSTEM DESCRIPTION*NOTE: This guide specification covers the requirements for three different types of intercommunication systems, one of which shall be selected for the project. The various types are as follows:Type 1, Direct Connected

21、, Keyed System. This type of system is applicable for relatively small systems (maximum quantity of remote stations approximately 30) and generally when only a small number of master stations (usually 1 or 2) are required. However, if there is a requirement for annunciation at more than one location

22、 or a requirement for multiple conversation paths, the use of this system with more than 1 or 2 master stations, or with many more than 30 remote stations may be justified or required.Type 2, Single Conversation Path, Central Control System. This type of system is applicable to relatively large syst

23、ems (more than approximately 30 stations) where only one conversation path is required and usually only one master station. This type of system is applicable to BEQs. This type of system includes public address and paging systems when the unique requirements are included.Type 3, Multiple Conversatio

24、n Paths, Central Control System. This type of system is applicable to various size systems where a large portion of the total quantity of stations are master stations. A limited quantity of conversation paths may be specified as required.*Provide an Intercommunication System, Data Package 3 in accor

25、dance with Section 01 78 23 OPERATION AND MAINTENANCE DATA, which is solid state, modular in design, and of the wired and wireless type as indicated. Stations shall have capacity for later expansion to _ master and _ remote stations with _ handset and or with hands free operation without sacrificing

26、 any equipment or feature of performance. When both wired and wireless circuitry are used, such interface shall not present a reduction of function or quality.1.2.1 Sound ReproductionProvide an intercommunication system to reproduce a signal at all receiving stations from a 40 dB minimum input signa

27、l referenced to a microphone sound pressure level (SPL) over the frequency range of 300 _ to 3300 _ Hz. The received signal shall have a dynamic range of 30 dB, adjustable at the receiving station. Unless otherwise specified SPL shall be 20 micro Paschal. The root-mean-square (rms) extraneous noise

28、(e.g. hum) level introduced by the intercommunication system shall be at least 30 _ dB below the nominal signal level. Distortion, including SECTION 27 51 23.10 Page 5Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-envelope delay, intermodulation, cr

29、oss talk, and other nonlinear sources, shall not exceed 5 percent.1.2.2 System Operation and Service Features1.2.2.1 Control and Power RequirementsProvide a system with a power switch and an associated pilot light for ON and OFF operations. USE a volume control at each station to regulate listening

30、volume. System shall operate on 110-125 Vac, single phase, 60 Hz.1.2.2.2 Call-In IndicationMaster stations shall have a “call-in“ switch to provide an audible and/or visual indication of incoming calls from remote stations. Individual visual indication shall identify calling station and status, and

31、remain actuated until a call is answered by a master station.1.2.2.3 Identification PlatesIn addition to the manufacturers standard identification plates, provide engraved laminated phenolic identification plates for each component connection and terminal. Identification labels shall be 3-layer blac

32、k on white on black, engraved to show white letters on a black background. Any warning or caution labels shall be 3-layered red on white on red, engraved to show white letters on red background. Control switches and knobs shall be clearly marked with their function and status. Identification strips

33、for station selector switches shall be located to clearly identify remote and master stations and shall be protected by transparent plastic inserts.1.2.2.4 Speaker/Handset StationsAt speaker/handset stations, lifting the handset shall automatically cut out the loudspeaker in the station and all conv

34、ersation shall be carried through the handset.1.2.2.5 Privacy Switch*NOTE: Where noise does not exceed 55 dB, specify hands-free operation from distances up to 6 m (20 feet). In areas where the noise occasionally exceeds 55 dB, a talk-listen switch which overrides the hands-free operation should be

35、specified. Where a high noise environment exists, delete hands-free operation and specify only a talk-listen switch.*Provide a privacy switch at each remote station. When in the ON position, the switch shall prevent any transmission of sound from the remote station. When in the OFF position, without

36、 further switch manipulation, the station shall respond to incoming calls upon voice activation from anywhere within a 6 m 20 foot radius of station.1.3 SUBMITTALS*NOTE: Review submittal description (SD) definitions in Section 01 33 00 SUBMITTAL PROCEDURES and edit SECTION 27 51 23.10 Page 6Provided

37、 by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-the following list to reflect only the submittals required for the project. Submittals should be kept to the minimum required for adequate quality control.A “G” following a submittal item indicates that the sub

38、mittal requires Government approval. Some submittals are already marked with a “G”. Only delete an existing “G” if the submittal item is not complex and can be reviewed through the Contractors Quality Control system. Only add a “G” if the submittal is sufficiently important or complex in context of

39、the project.For submittals requiring Government approval on Army projects, a code of up to three characters within the submittal tags may be used following the “G“ designation to indicate the approving authority. Codes for Army projects using the Resident Management System (RMS) are: “AE“ for Archit

40、ect-Engineer; “DO“ for District Office (Engineering Division or other organization in the District Office); “AO“ for Area Office; “RO“ for Resident Office; and “PO“ for Project Office. Codes following the “G“ typically are not used for Navy, Air Force, and NASA projects.Choose the first bracketed it

41、em for Navy, Air Force and NASA projects, or choose the second bracketed item for Army projects.*Government approval is required for submittals with a “G“ designation; submittals not having a “G“ designation are for Contractor Quality Control approval.information only. When used, a designation follo

42、wing the “G“ designation identifies the office that will review the submittal for the Government. Submit the following in accordance with Section 01 33 00 SUBMITTAL PROCEDURES:SD-02 Shop DrawingsIntercommunication SystemInstallationSD-03 Product DataSpare PartsAcceptance TestsSD-06 Test ReportsAccep

43、tance TestsSD-10 Operation and Maintenance DataIntercommunication System1.4 DELIVERY, STORAGE, AND HANDLINGProtect all equipment delivered and placed in storage from the weather, SECTION 27 51 23.10 Page 7Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,

44、-,-humidity and temperature variation, dirt and dust, or other contaminants.1.5 EXTRA MATERIALSAfter approval of detail drawings and not later than _ months prior to the date of beneficial occupancy, furnish spare parts data for each different item of equipment and component in the system. Include with the data a complete list of parts and supplies, with current unit prices and source of supply.PART 2 PRODUCTS2.1 MATERIALS AND EQUIPMENT*