ARMY UFGS-26 09 13-2008 POWER MONITORING SYSTEM《电源监控系统》.pdf

《ARMY UFGS-26 09 13-2008 POWER MONITORING SYSTEM《电源监控系统》.pdf》由会员分享，可在线阅读，更多相关《ARMY UFGS-26 09 13-2008 POWER MONITORING SYSTEM《电源监控系统》.pdf（29页珍藏版）》请在麦多课文档分享上搜索。

1、*USACE / NAVFAC / AFCESA / NASA UFGS-26 09 13 (November 2008)-Preparing Activity: USACE SupersedingUFGS-26 09 13 (April 2006)UNIFIED FACILITIES GUIDE SPECIFICATIONSReferences are in agreement with UMRL dated October 2008*SECTION TABLE OF CONTENTSDIVISION 26 - ELECTRICALSECTION 26 09 13POWER MONITORI

2、NG SYSTEM11/08PART 1 GENERAL1.1 REFERENCES1.2 SYSTEM DESCRIPTION1.2.1 System Requirements1.2.2 System Response Times1.2.3 System Accuracy and Display1.2.4 Electrical Transients and Electromagnetic Interference1.2.4.1 Power Line Surge Protection1.2.4.2 Sensor Wiring Surge Protection1.2.4.3 Communicat

3、ions Channels Surge Protection1.2.5 Workstation Equipment Power Source1.2.6 Communications1.2.7 Expansion Requirements1.2.8 Protocols1.2.9 Utility Demand Interval Synchronization1.2.10 General Requirements for Testing1.2.11 Test Procedures and Reports1.3 DELIVERY OF TECHNICAL DATA AND COMPUTER SOFTW

4、ARE1.3.1 Data, Drawings, CD-ROMs, and Manuals1.3.2 Technical Data Package 1 - Existing Conditions Report1.3.3 Technical Data Package 2 - System Data1.3.3.1 System and Installation Drawings1.3.3.2 Equipment Data1.3.3.3 Installation, Setup and Operation Guides1.3.3.4 Users Guides1.3.3.5 Certifications

5、1.3.4 Technical Data Package 3 - Training Data1.3.5 Technical Data Package 4 - Performance Verification Testing Procedures1.3.6 Technical Data Package 5 - Performance Verification Testing Data1.3.7 Technical Data Package 6 - Operation and Maintenance Manuals1.4 ENVIRONMENTAL REQUIREMENTS1.5 MAINTENA

6、NCE AND SERVICE1.5.1 General Requirements1.5.2 Description of WorkSECTION 26 09 13 Page 1Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS1.5.3 Service Calls1.5.4 Records and Logs1.5.5 System Modifications1.5.6 Software1.5.7 Telephone ConsultationPART 2 PR

7、ODUCTS2.1 MATERIALS AND EQUIPMENT2.1.1 General2.1.2 Nameplates2.1.3 Field Wiring, Cabling, and Terminal Blocks2.1.4 Power Supplies2.1.5 Enclosures2.1.6 EMI/RFI Compliance2.2 FIELD EQUIPMENT2.2.1 Basic Intelligent Electronic Device (IED)2.2.1.1 Basic IED2.2.1.2 Mounting2.2.1.3 Communications2.2.1.4 K

8、WH Value Retention2.2.2 IED Communication Equipment2.2.3 Enhanced IED2.3 INSTRUMENT TRANSFORMERS2.3.1 Potential Transformers2.3.2 Multi-Ratio Current Transformers2.4 WORKSTATION EQUIPMENT2.4.1 Workstation Computer2.4.1.1 Digital Computer2.4.1.2 Memory2.4.1.3 Hard Disk Drive Data Storage2.4.1.4 Flopp

9、y Disk Drive2.4.1.5 CD-ROM Drive2.4.1.6 Workstation Computer Magnetic Tape Drive2.4.1.7 Workstation Color Monitors2.4.1.8 Keyboard2.4.1.9 Mouse2.4.1.10 Audible Alarm2.4.1.11 Laser Printer2.4.2 Communications2.5 SYSTEM SOFTWARE2.6 COMMAND SOFTWARE2.6.1 General Features2.6.2 Database Management2.6.2.1

10、 Real-Time Database2.6.2.2 Database Editor2.6.2.3 Calculated Value2.6.3 Scanning2.6.4 Error Detection and Retransmission2.6.5 User Interface Software2.6.5.1 General Display Requirements2.6.5.2 Display Editor2.6.5.3 Specific Displays2.6.6 System Access Control2.6.7 Trending2.6.7.1 Software General Re

11、quirements2.6.7.2 Trend Description Fields2.6.7.3 Trend Functions2.6.7.4 Storage of Trend FilesSECTION 26 09 13 Page 2Provided by IHSNot for Resale-,-,-2.6.8 Report Generator2.6.8.1 Required Software Features2.6.8.2 Creation of Reports2.6.8.3 Standard Reports2.6.9 Alarm Processing2.6.10 Historical D

12、ata Processing2.6.10.1 System General Requirements2.6.10.2 DDE Data Export2.6.10.3 Waveform Data Processing2.7 FIELD EQUIPMENT SOFTWARE2.8 INITIAL STOCKS2.9 COMMUNICATIONS CHANNELS2.10 LAN SOFTWAREPART 3 EXECUTION3.1 EXAMINATION3.2 INSTALLATION3.2.1 Scheduling of Work and Outages3.2.2 Demolition and

13、 Removal3.2.3 Installation of Field Equipment3.2.3.1 General Requirements3.2.3.2 Grounding3.2.3.3 Communications Equipment3.2.4 Installation of Workstation Equipment3.2.5 Installation of Current Transformers3.2.6 Installation of Software3.2.6.1 General3.2.6.2 Development of Database3.2.6.3 Displays

14、Required3.2.7 Installation of LAN Equipment3.3 TRAINING3.3.1 General3.3.2 Operators Training I3.3.3 Operators Training II3.3.4 Maintenance Training3.4 SITE TESTING3.4.1 General3.4.2 Field Testing3.4.3 PVT- End of Section Table of Contents -SECTION 26 09 13 Page 3Provided by IHSNot for Resale-,-,-*US

15、ACE / NAVFAC / AFCESA / NASA UFGS-26 09 13 (November 2008)-Preparing Activity: USACE SupersedingUFGS-26 09 13 (April 2006)UNIFIED FACILITIES GUIDE SPECIFICATIONSReferences are in agreement with UMRL dated October 2008*SECTION 26 09 13POWER MONITORING SYSTEM11/08*NOTE: This guide specification covers

16、 the requirements for power monitoring systems.Edit this guide specification for project specific requirements by adding, deleting, or revising text. For bracketed items, choose applicable items(s) or insert appropriate information.Remove information and requirements not required in respective proje

17、ct, whether or not brackets are present.Comments and suggestions on this guide specification are welcome and should be directed to the technical proponent of the specification. A listing of technical proponents, including their organization designation and telephone number, is on the Internet.Recomm

18、ended changes to a UFGS should be submitted as a Criteria Change Request (CCR).*PART 1 GENERAL*NOTE: This section will be used in conjunction with Sections 02 41 00 DEMOLITION AND DECONSTRUCTION; 26 20 00 INTERIOR DISTRIBUTION SYSTEM; 33 71 01 OVERHEAD TRANSMISSION AND DISTRIBUTION; 33 70 02.00 10 E

19、LECTRICAL DISTRIBUTION SYSTEM, UNDERGROUND; 27 21 10.00 10 FIBER OPTIC DATA TRANSMISSION SYSTEM; 27 15 19.00 10 WIRE LINE DATA TRANSMISSION SYSTEM; 33 82 01 INTERCOMMUNICATION SYSTEM; and any other guide specification sections required by this design.*1.1 REFERENCES*SECTION 26 09 13 Page 4Provided b

20、y IHSNot for ResaleNo reproduction or networking permitted without license from IHSNOTE: This paragraph is used to list the publications cited in the text of the guide specification. The publications are referred to in the text by basic designation only and listed in this paragraph by organization,

21、designation, date, and title.Use the Reference Wizards Check Reference feature when you add a RID outside of the Sections Reference Article to automatically place the reference in the Reference Article. Also use the Reference Wizards Check Reference feature to update the issue dates.References not u

22、sed in the text will automatically be deleted from this section of the project specification when you choose to reconcile references in the publish print process.*The publications listed below form a part of this specification to the extent referenced. The publications are referred to within the tex

23、t by the basic designation only.AMERICAN NATIONAL STANDARDS INSTITUTE (ANSI)ANSI INCITS 154 (1988; R 2004) Office Machines and Supplies - Alphanumeric Machines-Keyboard ArrangementINSTITUTE OF ELECTRICAL AND ELECTRONICS ENGINEERS (IEEE)IEEE C37.90.1 (2002; Errata 2003) Surge Withstand Capability (SW

24、C) Tests for Relays and Relay Systems Associated with Electric Power ApparatusIEEE C57.13 (2008) Standard Requirements for Instrument TransformersIEEE C62.41.1 (2002) IEEE Guide on the Surges Environment in Low-Voltage (1000 V and Less) AC Power CircuitsIEEE C62.41.2 (2002) IEEE Recommended Practice

25、 on Characterization of Surges in Low-Voltage (1000 V and Less) AC Power CircuitsIEEE Std 802.3 WARNING: Text in tags exceeds the maximum length of 300 charactersINTERNATIONAL ELECTROTECHNICAL COMMISSION (IEC)IEC 61000-4-5 (2005) Electromagnetic Compatibility (EMC) - Part 4-5: Testing and Measuremen

26、t Techniques; Surge Immunity TestSECTION 26 09 13 Page 5Provided by IHSNot for Resale-,-,-NATIONAL ELECTRICAL MANUFACTURERS ASSOCIATION (NEMA)NEMA 250 (2003) Enclosures for Electrical Equipment (1000 Volts Maximum)NEMA C12.1 (2008) Electric Meters; Code for Electricity MeteringNEMA C12.20 (2002) Ele

27、ctricity Meter - 0.2 and 0.5 Accuracy ClassesNEMA C62.61 (1993) Gas Tube Surge Arresters on Wire Line Telephone CircuitsNEMA ICS 1 (2000; R 2005) Standard for Industrial Control and Systems General RequirementsNEMA WC 74 (2006) Standard for 5-46 kV Shielded Power Cable for use in the Transmission an

28、d Distribution of Electric EnergyTELECOMMUNICATIONS INDUSTRY ASSOCIATION (TIA)TIA-232-F (1997; R 2002) Interface Between Data Terminal Equipment and Data Circuit-Terminating Equipment Employing Serial Binary Data InterchangeTIA-485-A (1998; R 2003) Electrical Characteristics of Generators and Receiv

29、ers for Use in Balanced Digital Multipoint SystemTIA/EIA-568-B.1 (2001 Addendums 2001, 2003, 2003, 2003, 2004, 2007) Commercial Building Telecommunications Cabling Standard - Part 1: General RequirementsU.S. NATIONAL ARCHIVES AND RECORDS ADMINISTRATION (NARA)47 CFR 15 Radio Frequency Devices1.2 SYST

30、EM DESCRIPTION*NOTE: Designer will add location and site specific requirements, and select a single workstation or multiple workstation system as described under paragraph Communications.*1.2.1 System RequirementsThe power monitoring system, consisting of commercial, off-the-shelf intelligent electr

31、onic devices (IEDs), communication channels, and PC-based workstation equipment, will be used by _ to monitor the operation of _ at _. Provide a power monitoring system that is a single multiple workstation system utilizing an Ethernet local area network (LAN). The power monitoring system workstatio

32、ns will be located at _.SECTION 26 09 13 Page 6Provided by IHSNot for Resale-,-,-1.2.2 System Response Timesa. Any new display shall begin to update the workstation monitor within 2 seconds after being requested. Preformatted displays shall be completely presented within 5 seconds after the request.

33、b. All calculated values shall be updated from the database, when displayed at the workstation, at least every 15 seconds.c. Digital status indications, when displayed at the workstation, shall be updated within 15 seconds from the IED.d. Analog values, when displayed at the workstation shall be upd

34、ated within 15 seconds from the IED.1.2.3 System Accuracy and Display*NOTE: Designer will include THD and K-Factor only when Enhanced IEDs are specified, and will add requirements for additional site specific measurements, including range and accuracy, for any special application not listed.*The sys

35、tem shall maintain the specified end-to-end accuracy from sensor to all workstation displays, including the effects of transmitters, transducers, and engineering units conversions, for one year for the applications specified and shall report and display changes in sensed values as specified. The sys

36、tem accuracy and display requirements are as follows:a. Current: with a range for the specific application 1.0 percent of reading; display and print to nearest ampere.b. Voltage: with a range for the specific application 1.0 percent of reading; display and print to nearest volt.c. Power Factor: 1.0

37、percent of reading; display and print to nearest hundredth.d. kWh: with a range for the specific application 1.0 percent of reading; display and print to nearest kWh.e. KW: with a range for the specific application 1.0 percent of readings.f. KVA: with a range for the specific application 1.0 percent

38、 of reading; display and print to nearest KVA.g. KVAR: with a range for the specific application 1.0 percent of reading; display and print to nearest KVAR.h. Frequency: 0.05 Hz; display and print to nearest 0.1 Hz.i. Total Harmonic Distortion (THD) in percent for current and voltage, each phase.SECT

39、ION 26 09 13 Page 7Provided by IHSNot for Resale-,-,-j. K-Factor (dimensionless ratio based on harmonic content of current waveform).k. Special application(s) added by the designer, as needed.1.2.4 Electrical Transients and Electromagnetic Interference1.2.4.1 Power Line Surge ProtectionProtect works

40、tation equipment connected to ac circuits from power line surges and meet the requirements of IEEE C62.41.1 and IEEE C62.41.2 location category A3, while equipment is operating. In addition, protect all IEDs to meet the requirements of IEEE C37.90.1 or the requirements of IEC 61000-4-5, test level 4

41、, while the equipment is operating. Fuses shall not be used for surge protection.1.2.4.2 Sensor Wiring Surge ProtectionProtect all digital and analog inputs of all IEDs against surges induced on sensor wiring to meet the requirements of IEEE C37.90.1 or the requirements of IEC 61000-4-5, test level

42、4, while the equipment is operating. Fuses shall not be used for surge protection.1.2.4.3 Communications Channels Surge ProtectionProtect communications equipment against surges induced on its communications channels. Protect communication interfaces to all field equipment to meet the requirements o

43、f IEEE C37.90.1 or the requirements of IEC 61000-4-5, test level 4, while the equipment is operating. Fuses shall not be used for surge protection. Metallic cables and conductors which serve as communications channels between buildings shall have surge protection installed at equipment and additiona

44、l triple electrode gas surge protectors rated for the application installed at each end, within 1 m 3 feet of the building cable entrance. Surge protectors shall meet the requirements of NEMA C62.61.1.2.5 Workstation Equipment Power Source*NOTE: The designer will show uninterruptible power supply (UPS) location and power requirements on the project drawings. UPS power will be required for the workstation, laser printer, and gateways.*Power workstation equipment from an uninterruptible power suppl