ARMY MIL-S-44429-1991 SLEEPING BAG SYSTEM FOR INTERMEDIATE COLD WEATHER《中等寒冷天气用睡袋》.pdf

《ARMY MIL-S-44429-1991 SLEEPING BAG SYSTEM FOR INTERMEDIATE COLD WEATHER《中等寒冷天气用睡袋》.pdf》由会员分享，可在线阅读，更多相关《ARMY MIL-S-44429-1991 SLEEPING BAG SYSTEM FOR INTERMEDIATE COLD WEATHER《中等寒冷天气用睡袋》.pdf（7页珍藏版）》请在麦多课文档分享上搜索。

1、- MIL-S-44429 BY lsl 9999906 0495bO T MIL-S-44429 5 September 1991 MILITARY SPECIFICATION SLeEPING BAG SYSTEM, FOR INIERMEDIATE CL WEATHER This specification is approved for use by all Departments and Agencies of the Department of Defense. 1. SCOPE 1.1 Scope. This specification covers a caplete inte

2、rmediate cold weather, sleeping bag system consisting of intermediate cold weather sleeping bag, waterprmf and moisture vapor permeable sleeping bag cover, and a nylon stuff bag to carry the system. 2.1 Government documents. 2.1.1 spec ifications, standards, and handbooks. The following specifica- u

3、nless otherwise specified, the issues of these documents tions, standards, and handbooks form a part of this document to the extent specified herein. are those listed in the issue of the Department of Defense Index of Specifications and Standards (DODISS) and supplement thereto, cited in the solicit

4、ation (see 6.2). . SPECIFICATIONC FEDERAL PPP-B-636 - Boxes, Shipping, Fiberbani Beneficial camnents (recamnendations, additions, deletions) and any pertinent data which may be used in improving this document should be addressed to: Center, Natick, MA 01760-5019 by using the Standardi zation Doc=ume

5、nt Improvement Proposal (DD Form 1426) appearing at the end of this doc=ument or by letter. U.S. Amy Natick Research, Developnt, and Engineering AMSC NIA Fsc 8465 DISTRIIN SFATEMELW A. Approved for public release; distribution is unlimited. Licensed by Information Handling ServicesMIL-S-44429 84 W 9

6、99990b 0489561 1 c- MIL-S-44429 MILITARY MIL-L-35078 - Wads, Unit: Preparation of Semiperishable Subsistence Items; Clothing, Personal Equipent, Equipage; General Specification For MIL-B-44306 - Bag, Stuff, Sleeping System MIL-C-44307 - Cover, Bivy, Sleeping System MIL-S-44309 - Sleeping Bag, For Sl

7、eeping Systems STANDARDS MILITARY MIL-STD-105 - Sampling Procedures and Tables for Inspection by MIL-STD-129 - Marking for Shipent and Storage MIL-STD-147 - Palletized Unit Wads Attributes (Unless otherwise indicated, copies of federal and military specifications, standards, and handbooks are availa

8、ble from the Standanlization Documents Order Desk, Building 4D, 700 Robbins Avenue, Philadelphia, PA 19111-5094.) 2.2 Non-Government publications, The follawing documents form a part of this document to the extent specified herein. the issues of the documents which are DoD adopted are those listed i

9、n the issue of the DDISS cited in the solicitation. the issues of documents not listed in the DODISS are the issues of the documents cited in the solicitation (see 6.2). Unless otherwise specified, Unless otherwise specified, AMERICAN SOCIETY FOR TESTING AND MATERIALS (ASIM) D 3951 - Standard Practi

10、ce for Comnercial Packaging (Application for copies should be addressed to the American Society for incorrect; illegible; of improper size, and interior) location, sequence, or method of application. Materials Workmanship Content Any component missing, damaged, or not as specified. Inadequate applic

11、ation of components, such as: Bulged or distorted container. incomplete sealing or closure of flap, improper taping, loose strapping, or inadequate stapling. Not as specified. 4 ? I Licensed by Information Handling Services3 MIL-S-44429 84 m 9999906 04895b4 7 m ,-i 2-. ,I MIL-S-44429 4.2.4 Palletiza

12、tion examination. The fully packaged and palletized end it- shall be examined for the defects listed below. The lot size shall be expressed in units of palletized unit loads. The sample unit shall be one palletized unit load, fully packaged. The inspection level shall be S-1 and the AQL, expressed i

13、n terms of defects per hundred units, shall be 6.5. Examine Defects Finished dimensions LRngth, width, or height exceeds specified maXirmrm requirement. Palletization Pallet pattern not as specified. Load not bonded as specified. Weight Exceeds maximum load limits. Marking anitted; incorrect; illegi

14、ble; of improper size, location, sequence, or method of application. 5. PACKAGING 5.1 Preservation. Preservation shall be level A or Comercial (see 6.2). 5.1.1 Level A preservation. One stuff bag shall be put inside a sleeping bag. be attached to the sleeping bag by means provided. then be laid out

15、straight and compactly rolled fmm the foot to the head, and secured by means of stretch wrapping or tied with cotton tape toward the ends of each rolled bag. accordance with ASTM D 3951. The sleeping bag shall have all fasteners closed. A bivy cover shall The sleeping bag shall 5.1.2 Comercial. Each

16、 sleeping bag system shall be preserved in 5.2 Packinq. Packing shall be level A, B, or Cannercia1 as specified (see 6.2). 5.2.1 -vel A packinq. One complete sleeping bag system preserved as specified in 5.1, shall be packed in a close-fitting end-opening fiberbard container conforming to style Rsc-

17、L, grade V2s of PPP-B-636. dimensions of each shipping container shall approximate 11 inches in length, 10 inches in width, and 26 inches in depth. The flutes of the box and liner shall run parallel to the score line of the opening of the box (see PPP-B-636, figure 2). of. the box. method V and rein

18、forced as specified in the appendix of PPP-B-636. containers shall be arranged in unit loads in accordance with MIL-L-35078 for the type and class of load specified (see 6.2). Inside The height of the liner shall be the full inside width Each shipping container shall be closed in accordance with Shi

19、pping 5 Licensed by Information Handling ServicesMIL-S-44429 84 9999906 0489565 9 W *c MIL-S-44429 5.2.2 mel B packinq. One complete sleeping bag system preserved as specified in 5.1, shall be packed in a close-fitting, end-opening fiberboard container conforming to style RSC-L, type CF, variety Dw,

20、 class domestic, grade 275 of PPP-B-636. Inside dimensions of each shipping container shall approximate 11 inches in length, 10 inches in width, and 26 inches in depth. The flutes of the box and liner shall run parallel to the score line of the opening of the box (see PPP-B-636, figure 2). The heigh

21、t of the liner shall be the full width of the box. accordance with method II, as specified in the appndix of PPP-B-636. Each shipping container shall be closed in 5.2.2.1 Weather-resistant fiberboard container. When specified (see 6.2), the fiberboard shipping container shall be a grade VC, VS, or V

22、4s fiberboard box fabricated in accordance with PPP-B-636 and closed in accordance with methcd III as specified in the appndix of PPP-B-636. 5.2.3 Comercial packinq. Each sleeping bag system preserved as specified in 5.1, shall be packed in acconiance with ASTM D 3951. 5.3 Palletization. When specif

23、ied (see 6.2), sleeping bag systems packed as specified in 5.2.2 or 5.2.3, shall be palletized on a 4-way entry pallet in accordance with load type Ia of MIL-STD-147. Pallet types shall be type I, (4-way entry), type IV, or V of MIL-SID-147. Each prepared load shall be bonded with primary and second

24、ary straps in accordance with bonding means C and D or film bonding mans F or G. accordance with the appendix of MIL-STD-147. Pallet pattern shall be number 35 in 5.4 Markinq. In addition to any special markings required by the contract or purchase order, shipping containers, and palletized unit loa

25、ds shall be marked in accordance with MIL-STD-129 or ASIM D 3951, as applicable. (This section contains information of a general or explanatory nature that may be helpful, but is not mdatory.) 6.1 Intended use. The sleeping bag system is intended for use in inter- mediate cold weather conditions by

26、personnel of the Department of Defense. 6.2 Acquisition requirements. Acquisition documents must specify the f ollcwing : a. Title, number, and date of this specification. b. Issue of DODISS to be cited in the solicitation, and if required, the specific issue of individual documents referenced (see

27、2.1.1 and 2.2). c. d. e. f. Ivels of preservation and packing (see 5.1 and 5.2). Ispe and class of unit load required (see 5.2.1). When weather-resistant grade fiberboard shipping containers are When palletization is required (see 5.3). required for level B packing (see 5.2.2.1). 6 Licensed by Infor

28、mation Handling Services9 - w MIL-S-44429 84 W 9999906 0489566 O W a .r 3s MIL-S-44429 6.3 Subject term (keyword) listinq. O Bivy cover 1ms Moisture vapr prmeable Stuff bag Custodians: Army-a Navy - Nu Air Force - 99 Review activities: Anrry-m DLA - CI Preparing activity: (Project 8465-0077) 7 Licensed by Information Handling Services