ARMY MIL-P-63395-1980 PROJECTILE 155MM INERT PXR 6325 (M549 AND SIM) LOADING ASSEMBLING AND PACKING《PXR 6325型(M549和SIM型)155 mm惰性弹的装药 组装和包装》.pdf

《ARMY MIL-P-63395-1980 PROJECTILE 155MM INERT PXR 6325 (M549 AND SIM) LOADING ASSEMBLING AND PACKING《PXR 6325型(M549和SIM型)155 mm惰性弹的装药 组装和包装》.pdf》由会员分享，可在线阅读，更多相关《ARMY MIL-P-63395-1980 PROJECTILE 155MM INERT PXR 6325 (M549 AND SIM) LOADING ASSEMBLING AND PACKING《PXR 6325型(M549和SIM型)155 mm惰性弹的装药 组装和包装》.pdf（12页珍藏版）》请在麦多课文档分享上搜索。

1、4 MIL-P-63395 13 7777706 0347b00 9 I /- $-3-7.-0$=- - /- MIL-P-63395 (AR) 12 August 1980 MILITARY SPECIFICATION LOADING, ASSEMBLING AND PACKING PROJECTILE, 155MM: IIWRT PXR 6325 (M549 (SIM) This specification is approved for use by US Army Armament Research and Development Command, and is available

2、for use by all Departments and Agencies of the Department of Defense. SCOPE 1. - 1.1 This specification covers the loading, assemblinq and packing of- the Projectile, 155MM: Inert PXR 6325 (M549 SIM) 2. APPLICABLE DOCUMENTS 2.1 The following documents of the issue in effect on date -of invitation fo

3、r bids, or request for proposal, form a part of this specification to the extent specified herein. SPEC IF I CAT I ON S MILITARY MIL-1-45607 - Inspection Equipment, Supply MIL-A-48978 - Ammunition, Standard Quality and Maintenance of Assurance Provisions, General Specification For STANDARDS MILITARY

4、 MIL-STD-105 - Sampling Procesures and Tables for Inspection by Attributes FSC: 1320 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,- _ MIL-P-63375 13 W 9777706 0347601 O MIL-P-63395 (AR) DRAWINGS (see 6.5) US ARMY ARMAMENT RESEARCH AND DEFLOPMENT CO

5、MMAND (ARRADCOM) 7549275 - Pallet 9236063 - Projectile, 155MM: Inert PXR 6325 (M549 SIM) (Copies of specifications, standards, drawings and publications required by suppliers in connection with specific procurement functions should be obtained from the procuring activity or as directed by the contra

6、cting officer). 3. REQUIREMENTS 3.1 Materials. Materials and parts shall be in accordance with the applicable drawings and specifications. 3.2 Assembled projectile. The assembled projectile shall comply with all requirements specified on Drawing (Dwg.) 9236063, and with all requirements specified in

7、 the applicable specifications. . 3.3 Inert fill. Inert fill shall have a specific gravity as specified on Dwg. 9236063. 3.4 LosJing of inert fill 3.4.1 Mating surfaces. The mating surfaces of threads shall be free of inert fill and all threads shall be free of foreign material. If a chemical cleane

8、r is required, acetone or methylene chloride shall be used. 3.4.2 Fuze well. The fuze well shall be free from any foreign matter or loose fill prior to assembly of the liner. 3.5 First article inspection. This specification contains technical provisions for first article inspection. Require- ments f

9、or the submission of first article samples by the contractor shall be as specified in the contract. 3.6 Workmanship. The requirements of workmanship are as shown on the applicable drawing, in the applicable specifi- cations and the following: 3.6.1 Cleaning. If required the cleaning method shall not

10、 be injurious to any of the parts nor shall the parts be contaminated by the cleaning agent. 2 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-P-b3395 13 II 9999906 03Li9602 2 I MIL-P-63395 (AR) 3.6.2 Protection of the rotatinq band. Care shall b

11、e exercised am1 times so that the rotating band of each projectile will not be nicked or burred. 3.6.3 Painting. Painting shall comply with the require- ments of the applicable drawing. touch before testing and packing for shipment. Drying time prior to testing shall be in accordance with the applic

12、able specification. All paint shall be dry to the 3.6.4 Foreign matter. No part or assembly shall contain dirt, grease, chips, rust corrosion or other foreign matter, prior to inspection and shipping. protect obturator from being damaged. 3.6.5 Obturator. Care shall be taken at all times to 4. QUALI

13、TY ASSURANCE. PROVISIONS 4.1 Responsibility for inspection and standard quality assurance provisions. Unless otherwise specified herein or in the contract, the provisions of MIL-A-48078 shall apply and are hereby made a part of this detail specification. - 4.2 Classification of inspections. The foll

14、owing types of inspections shall be performed on this item: a. First Article Inspection b. Quality Conformance Inspection 4.3 First Article Inspection 4.3.1 Submission. The contractor shall submit a first article sample as designated by the Contracting Officer for evaluation in accordance with the p

15、rovisions of 4.3.2. The first article sample shall consist of the following items in sample quantities as indicated. Part Description Drawing Proj ect i le, 15 5MM: Inert PXR 6325 (M549 Sim) 9236063 4.3.2 Inspections to be performed. Table I cpezfied herein. Quant i ty a See MIL-A-48078 and 4.3.3 Re

16、jection. See MIL-A-48078. 3 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-P-63395 13 m 9999906 03Li9603 Li m - 4J Fi al E U i 4 c o O Y n Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,- -I a- M

17、IL-P-63395 13 I 9777706 0349604 6 I MI L-P-6 3 3 95 (AR) 4.4 QUALITY CONFORMANCE INSPECTION 4.4.1 Inspection lot formation. Inspection lots shall conform with the lot formation provisions of MIL-A-48078. addition, each inspection lot of loaded projectiles shall contain: In . a. Projectile metal part

18、s of one lot interfix number from one manufacturer. b. Loaded projectile of one weight zone. c. Fuze well liners from one manufacturer produced in accordance with the same drawing, same drawing revision,. same specification, and same specification revision. 4.4.2 Examinations. See MIL-A-48078. a. Sa

19、mplinq plans. Unless otherwise specified in the Classificatzn of Defects and Test tables, sampling plans for major and minor defects shall be in accordance with MIL-STD-105, Inspection Level II. 5 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-1 MIL

20、-P-63395 13 E 7799906 0349b05 I E - M F FI KI O cl O ci k O .rl h a al rl vi ci o al .n O k a ir4 rg M 3 ; 1 -I u 3 u C 5 c a 4 c v) c KI E cy k O 5 k O O FI al ccc c O .I4 ccc al al o a E al al rn c .d O z W Provided by IHSNot for ResaleNo reproduction or networking permitted without license from I

21、HS-,-,-MIL-P-b3375 13 9779706 03Li7606 T H k O rl x rl a E O) u) VI O ci k O k e k Q) E 4 4 -3 E OJ Q) .FI u Zk cia oc an( -ab7 O kiec ao Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-I MIL-P-63395 13 7977706 0347607 L U 8 ri w 5 ri . . .w M N NN W

22、CVN M MM MMM *MM VQ C 4 E &I Q E . .rl ri ei O 8 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,- MIL-P-63395 13 999790b 0349608 3 m ! -. - U B t n U w c, k Q) H r ti c M 1 u3 M hl NN NNW N NNaN P) MM MMM M MMMM . . . . . . . w 4 Q) c, m 3Qk a3 o -u

23、o M m E m a k O M C d VI In rl E M C 4 x k al a O k a E *I ci O a Q) M m E m a tD C .d rl a Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-P-63395 13 W 997790b 0349b09 5 m Y) NN N MM M . N Nhl M MM . ?El Q C .4 rei w a Q c O z ?El Q ?El Q QM da

24、PM mc dQ wec Q -4 x 4 Orc 4 Ck a QQ E -a Q 40 v) Ek v) 1a I E k .FI wo rl e d Mor( w ea u *4 rd Q ?El* *m tu VI OQ k rlk aw VI o u -4 WQEM Oh C k M.4 koca e, 0.d a P CY m E4 k k 3 mw 2 Ev, I 10 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-! - - NI

25、L-P-63375 13 E 7777906 0347630 3 MIL-P-63395 (AR) 4.4.3 Testing 4.4.3.1 Inert fill. Prior to the start of loading a sample projectile shall be trial loaded and a core sample taken to determine specific gravity. If acceptable specific gravity is achieved loading may proceed using the loading paramete

26、rs es- tablished during trial loading. Subsequent testing for specific gravity shall precede loading with a new batch or lot of inert filler raw materials and prior to the start of each months produc ti on . 4.4.4 Inspection equipment. The contractor shall submit for apprval of inspection equipment

27、designs in accordance with the terms of the contract. See Section 6 of MIL-A-48078 and paragraph 6 . 3 herein. 4.4.5 Supply & maintenance. Supply and maintenance of the equipment shall be in accordance with MIL-1-45607. 5. PACKAGING 5.1 Packinq - Level A. The projectile shall be packed in accordance

28、 with Dwg. 7549275. 5.2 Marking. Marking shall be in accordance with Dwg. 7549275. 6. NOTES 6.1 Intended use. The components and assemblies covered by this specification are intended for use on the Projectile, 155MM: inert PXR 6325 (M549 SIM) 6.2 Orderinq data. See MIL-A-48078. 6.3 Submission of ins

29、pection designs for approval -See 6.2.3 of MIL-A-48078. Submit equipment desisns as reauired to - Commander , US Army Armament Research and Devlopment Command, ATTN: DRDAR-QAR-I, Dover, New Jersey 07801. with the applicable requirement is in doubt as a result of visual examination the characteristic

30、 may be measured or gaged to determine acceptability. 6.4 Visual examination qualification. When compliance 6.5 Drawings. Drawings listed specification under the headings US in Section 2 of this Army Armament Research and 11 Provided by IHSNot for ResaleNo reproduction or networking permitted withou

31、t license from IHS-,-,- MIL-P-63395 13 E 9999906 03i.19bLL 3 E MIL-P-63395 (AR) Development Command (ARRADCOM) may also include drawings prepared by and identified as, Edgewood Arsenal, Frankford Arsenal, Rock Island Arsenal, or Picatinny Arsenal drawings. Technical data originally prepared by these

32、 activities is now under the cognizance of ARRADCOM. 6.6 Submission of Certificate of Conformance and - ammunition data cards. In addition to the normal distribution of records for items procured by the Department of the Army, one copy of all certificates of conformance and ammunition data cards sha

33、ll be forwarded to Commander, ARRADCOM, Dover, New Jersey 07801, DRDAR-QAR-Q. C us tod i an : . Preparing activity: Army - AR Army - AR Project No. 1320-A514 * US. GOVERNMENT PRI NTI NG OFFICE : 1 980-703-0 23/42 64 12 O I Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-